RF/IF - RF Diplexers

 
FI168P157519-T: Filter Diplexer
Features Item Summary Diplexer, W-CDMA / CDMA / GSM ISM900 / Blue tooth / W-LAN / GPS, 0.65mm, 0603 Lifecycle Stage Mass Production Standard packaging quantity (minimum) Taping Papered 4000 Temperature
DP05A1920TTR: Diplexer 1920 Mhz Smd
The 0805 diplexer is a best in class low profile multilayer organic passive device that is based on AVX's patented multilayer organic high density interconnect technology. The MLOTM diplexer uses high
DPX202690DT-4149A2: Diplexer
Line width should be designed to match 50 characteristic impedance, depending on PCB material and thickness. Insertion Loss (dB) Return Loss (dB) Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Characteristic
MAFL-011026: Diplexer Broadband Catv
Features The is a low profile, surface mount filter with 3 transmission paths allowing full triplexer operation. The CATV reverse and forward bands are provided along with a further band meeting the MoCA
DPX165900DT-8125A1: Diplexer 2.4/5ghz Wlan
Insertion Loss (dB) Attenuation (dB) Characteristic Impedance Item Insertion Loss (dB) Attenuation (dB) Characteristic Impedance
DPX165850DT-8117A1: Diplexer 2.4/5ghz Wlan
Line width should be designed to match 50 characteristic impedance, depending on PCB material and thickness. Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Characteristic Impedance Return Loss (dB)
CX6026SNL: Filter Diplex F Conn 42/54 Mhz
Integrated diplexers and coaxial F-connectors DOCSIS 1.0/1.1/2.0 frequency conformance Multiple countries supported Cost-efficient design
RFDIP1608060L0T: Diplexer 2.4ghz, 5ghz
MULTILAYER CERAMIC NOTCH FILTER RFDIP Series ­ 1608(0603)- RoHS Compliance Halogens Free Product *Contents in this sheet are subject to change without prior notice. FEATURES Miniature footprint: 0.6 mm3 Low Insertion
DPX162690DT-8022B2: Diplexer 832mhz/2.2ghz Smd
Note: These samples are marked with trial sample identification. In mass production, this sample marking will be changed to show in the TDK full specification. 1 Insertion Loss 2 Insertion Loss 3 Attenuation
DPX165950DT-8026A1: Diplexer Wlan 2.4ghz, 5ghz 1608
Line width should be designed to match 50 characteristic impedance, depending on PCB material and thickness. Insertion Loss (dB) Return Loss (dB) Characteristic Impedance Insertion Loss (dB) Return Loss
RFDIP2012050L7T: Diplexer 2.4ghz, 5ghz
Halogens Free Product 2.4 GHz & 5 GHz ISM Band Working Frequency *Contents in this sheet are subject to change without prior notice. FEATURES 1. Miniature footprint: mm3. 2. Low Profile Thickness 3. Low insertion
2450DP15J5400E: Ceramic Diplexer 2.4/5.0 Ghz
1 Lower Freq. Port (P1) 2 GND 3 Higher Freq. Port (P3) 4 GND 5 Common Port (P2) 6 GND Mounting Considerations Mount these devices with brown mark facing up. *Line width should be designed to provide 50 impedance
0500DP44A1215E: Diplexer 500mhz/1.2/1.8 Ghz Smd
TFSD10055950-5001C1A: Thin-film Diplexer 2.4/5ghz Wlan
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * In this product, the recommended soldering condition is `reflow'. Reflow Soldering : Maximum 2 times The

TFSD10055950-5102A2
2450DP15L5400E: Ceramic Diplexer 2.45/5.5 Ghz
ACMD-6003-BLK: Duplexer Fbar Mini
The Avago is a highly miniaturized duplexer designed for use in UMTS Band MHz UL, ­ 1880 MHz DL) handsets and mobile data terminals. Low Insertion Loss in the Tx channel minimizes current drain from the power

ACMD-6003-SG1
ACMD-6003-TR1
ACMD-7605-BLK: Duplexer Fbar Mini Umts 3x3mm
Bulk Alternate Packaging ; 880MHz ~ 915MHz, 925MHz ~ 960MHz ; 30.00dB / - ; High
DPX205850DT-9038A1-H: Diplexer Wlan 2.4ghz, 5ghz 2012
FI212P085909-T: Filter Diplexer
Features Item Summary Diplexer, W-CDMA / CDMA / GSM / LTE ISM900 / GPS, 1mm, 0805 Lifecycle Stage Mass Production Standard packaging quantity (minimum) Taping Embossed 3000 Temperature Range Impedance
ACMD-6107-BLK: Duplexer Fbar Mini
The Avago is a highly miniaturized duplexer designed for use in LTE Band MHz UL, ­ 2690 MHz DL) handsets and mobile data terminals. Low Insertion Loss in the Tx channel minimizes current drain from the power

ACMD-6107-SG1
ACMD-6107-SY1
ACMD-6107-TR1
ACMD-7405-TR1
ACMD-7405-TS1
DPX165950DT-8126A1: Diplexer Wlan 2.4ghz, 5ghz 1608
Line width should be designed to match 50 characteristic impedance, depending on PCB material and thickness. Insertion Loss (dB) Return Loss (dB) Power Handling (W) Characteristic Impedance Insertion Loss
1175DP41B1925E: Diplexer Lnb
FI168P157525-T: Filter Diplexer
Pass band 0 Pass band 1 Pass band 2 Pass band 1 V.S.W.R at Pass band 2 Attenuation Low Band Port Common Port Low Band Port 2400-2500MHz Low Band Port Pass Band frequency Insertion Loss at Pass band V.S.W.R
DPX202700DT-4035B5: Diplexer
Return Loss (dB) Attenuation (dB) Characteristic Impedance
DPX252500DT-5217A1: Diplexer
Material, Layer Top Resist Cupper Surface Pattern FR-4 Cupper Inner GND FR-4 Cupper Bottom GND Line width should be designed to match 50 characteristic impedance, depending on PCB Insertion Loss (dB) Return
DPX255950DT-5120A1: Multilayer Diplexer For 2400-250
Line width should be designed to match 50 characteristic impedance, depending on PCB material and thickness. Item Insertion Loss (dB) Attenuation (dB) Characteristic Impedance
DPX201990DT-4151A2: Diplexer
Insertion Loss (dB) Attenuation (dB) Characteristic Impedance
DPX202700DT-4062A1: Multilayer Diplexer For 698-960m
Insertion Loss (dB) Return Loss (dB) Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Characteristic Impedance
DPX165950DT-8118A1: Diplexer 2.4/5ghz Wlan
Line width should be designed to match 50 characteristic impedance, depending on PCB material and thickness. Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Characteristic Impedance
DPX204752DT-4028A1: Diplexer 2.4/4.0ghz Wlan 0805smd
Line width should be designed to match 50 characteristic impedance, depending on PCB material and thickness. Insertion Loss (dB) Attenuation (dB) Characteristic Impedance
ACMD-7403-TR1: Duplexer Fbar Mini Pcs 3x3mm
Tape & Reel (TR) Alternate Packaging ; 1.85GHz ~ 1.9GHz / 1.93GHz ~ 1.99GHz ;
FI212P0892M2-T: Duplexer Filter Hi Freq Multilay
ACMD-7612-BLKG: Duplexer Fbar Mini Umts 2.5x3mm
The Avago is a miniature duplexer designed for use in UMTS Band I handsets. Maximum Insertion Loss in the Tx channel is only 1.5 dB, which minimizes current drain from the power amplifier. Insertion Loss

ACMD-7612-TR1
ACMD-7612-TR1G
DPX252690DT-5032B1: Multilayer Diplexer For 699-960m
DPX205950DT-9108A1: Diplexer 2.4/5ghz W-lan 0805 Smd
Line width should be designed to match 50 characteristic impedance, depending on PCB material and thickness. Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Characteristic Impedance
DPX205950DT-9126A1: Diplexer 2.4/5ghz Wlan
Line width should be designed to match 50 characteristic impedance, depending on PCB material and thickness. Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Characteristic Impedance Insertion Loss
2450DP39H5500E: Ceramic Diplexer 2.45/5.5 Ghz
Reel Quanity Storage Period Power Capacity *18 months in vacuum sealed bag and 1 week cumulative after opened. No. Function 1 Common Port 2 GND 3 Higher Freq. Port 4 Lower Freq. Port 5 GND 6 GND The contents
ACFM-7102-BLK: Quintplexer Filter Module 5x8mm
The Avago Technologies' is a quintplexer that combines PCS and Cellular duplexer functions with a GPS filter. This device simplifies handset applications that are designed for simultaneous voice service

ACFM-7102-TR1
DPX202170DT-4049A1: Diplexer
Line width should be designed to match 50 characteristic impedance, depending on PCB material and thickness. Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Characteristic Impedance
FI212P082934-T: Filter Diplexer
Insertion Loss Pass band at Pass band Insertion Loss at Pass band High Band V.S.W.R Pass band 1 Pass band 2 0.3-960MHz Common Port High Band Port 698-960MHz 1710-2690MHz Specification The data is reference
DPX165900DT-8025A1: Diplexer 2.4/5ghz Wlan
Insertion Loss (dB) Attenuation (dB) Characteristic Impedance Item Insertion Loss (dB) Attenuation (dB) Characteristic Impedance
FI212P085912-T: Filter Diplexer
Features Item Summary Diplexer, W-CDMA / CDMA / GSM / LTE ISM900 / GPS, 1mm, 0805 Lifecycle Stage Mass Production Standard packaging quantity (minimum) Taping Embossed 3000 Temperature Range Impedance
DP05B5425TTR: Diplexer 5425 Mhz Smd
The 0805 MLOTM diplexer is best in class low profile multilayer organic passive device that is based on AVX's patented multilayer organic high density interconnect technology. The MLOTM diplexer uses high
ACFM-7103-BLK: Quintplexer Filter Module 4x7mm
Bulk Alternate Packaging ; 824MHz ~ 894MHz / 1.85GHz ~ 1.99GHz ; 55.00dB
DPX202170DT-4149A1: Diplexer
Line width should be designed to match 50 characteristic impedance, depending on PCB material and thickness. Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Characteristic Impedance
DPX161576DT-8011B1: Diplexer Gps 806mhz/1.574ghz Smd
Line width should be designed to match 50 characteristic impedance, depending on PCB material and thickness. Insertion Loss (dB) Return Loss (dB) Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Characteristic
DPX201990DT-4014A2: Diplexer Agsm/pcs 850mhz/1.9ghz
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. · Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium,
ACMD-7409-TR1: Duplexer Fbar Mini Pcs 3.8x3.8mm
Tape & Reel (TR) Alternate Packaging ; 1.85GHz ~ 1.9GHz / 1.93GHz ~ 1.99GHz ;
ACFM-7101-BLKG: Quintplexer Filter Module 5x8mm
Bulk Alternate Packaging ; 824MHz ~ 894MHz / 1.85GHz ~ 1.99GHz ; 55.00dB
DPX165850DT-8017A1: Diplexer 2.4ghz, 5ghz Wlan 1608
Line width should be designed to match 50 characteristic impedance, depending on PCB material and thickness. Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Characteristic Impedance
DPX165950DT-8130A1: Diplexer 2.4/5ghz Wlan
Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Characteristic Impedance
DIP1524-01D3: Ic Diplexer Gps/glonass Flipchip
Features Low insertion loss High attenuation levels Input power for GPS: 25 dBm max Input power for WLAN: 28 dBm max High power capacity Lead-free, Flip-Chip package Small footprint Very low profile 630 µm thickness)
2450DP15D5400E: Diplexer Lpf/bpf 2.45/5.4ghz
Attenuation 1.40 dB max.@ 19 dB min. @ High Band Path ~ 5.875 GHz ~ 2.5 GHz * Note: The I.L. parameters are based on probed & TRL cal'd measurement Input Power Impedance Operating Temp Storage Temp Reel
ACFM-7101-BLK: Quintplexer Filter Module 5x8mm
Bulk Alternate Packaging ; 824MHz ~ 894MHz / 1.85GHz ~ 1.99GHz ; 55.00dB
DPX165950DT-8030A1: Diplexer 2.4/5ghz Wlan
Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Characteristic Impedance
2450DP15M5500: 2/5g Wifi Bpf-bpf Diplexer 0805
/ 5.5GHz WLAN Ceramic Diplexer (BPF/BPF type). LGA bottom terminations Reel Quanity Storage Period Power Capacity *18 months in vacuum sealed bag and 1 week cumulative after opened. Terminal Configuration

2450DP15M5500E
ACMD-7403-BLK: Duplexer Fbar Mini Pcs 3x3mm
Bulk Alternate Packaging ; 1.85GHz ~ 1.9GHz / 1.93GHz ~ 1.99GHz ; 52.00dB
DPX162500DT-8014A1: Diplexer Gps, Bluetooth Smd
Dimensions in mm Line width should be designed to match 50 characteristic impedance, depending on PCB material and thickness. Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Characteristic Impedance Return
DPX315950DT-5005B2: Diplexer 2.4/5ghz W-lan 1206 Smd
This width is 50. Micro-strip line for 0.4mm thick glass-epoxy substrate. Item Insertion loss Return loss Attenuation 0.35 0.3 Line width be designed to match 50 characteristic impedance depending on PCB material

DPX315950DT-5006C1
ACFM-7101-TR1G: Quintplexer Filter Module 5x8mm
Tape & Reel (TR) Alternate Packaging ; 824MHz ~ 894MHz / 1.85GHz ~ 1.99GHz ;
0859DP18B1920E: Rf Diplexer Gsm 850/1850mhz
2450DP15F5400E: Diplexer Lpf/bpf 2.45/5.4ghz
Input Power Impedance Operating Temp Storage Temp Reel Quanity * Note: The I.L. parameters are based on probed & TRL cal'd measurement 1 Lower Freq. Port (P1) 2 GND 3 Higher Freq. Port (P3) 4 GND 5 Common
2450DP15H5400E: Diplexer 2.45 5.5ghz 0805
1 Higher Freq. Port (P1) 2 GND 3 Lower Freq. Port (P3) 4 GND 5 Common Port (P2) 6 GND Mounting Considerations Mount these devices with brown mark facing up. Line width should be designed to provide 50 impedance
RFDIP2520080TM0T62: Diplexer 1.5ghz, 2.4ghz 2520
1.575GHz GPS BAND WORKING FREQUENCY Bluetooth/WiFi BAND WORKING FREQUENCY WiMAX BAND WORKING FREQUENCY DVB BAND WORKING FREQUENCY 1.8GHz BAND WORKING FREQUENCY 2.4GHz BAND WORKING FREQUENCY ~ 1606 MHz GNSS
DIP2450-01D3: Rf Diplexer 2g 5g Wlan
Features · Low insertion loss in pass band· High attenuation levels· High rejection of out-of-band frequencies· Small footprint: 1.4 mm2 Benefits· Very low profile (<600 µm after reflow)· High Q, low loss·
0892DP15D1940E: Rf Diplexer-filter 900/1800 Mhz
Return Loss Input Power Impedance Operating Temp Storage Temp 12 months in vacuum sealed bag; 1 week after No. Function 1 Lower Freq. Port (P3) 2 GND 3 Higher Freq. Port (P1) 4 GND 5 Common Port (P2) 6 GND Mounting
DPX105850DT-6019A1: Diplexer 2.4ghz/5ghz Wlan 1005
Material, Layer Top Resist Cupper Surface Pattern FR-4 Cupper Inner GND FR-4 Cupper Bottom GND Line width should be designed to match 50 characteristic impedance, depending on PCB material and thickness. Insertion
DPX202690DT-4049A2: Diplexer 832mhz/2.2ghz Smd
Line width should be designed to match 50 characteristic impedance, depending on PCB material and thickness. Insertion Loss (dB) Return Loss (dB) Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Characteristic
2450DP15B5512E: Diplexer Lpf/hpf 2.45/5.5ghz
Input Power Impedance Operating Temp. Reel Quanity Terminal Configuration No. Function 1 GND 2 Common Port (P1) 3 GND 4 Low Freq. Port (P3) 5 GND 6 GND 7 GND 8 High Freq. Port (P2) Mount these devices
2450DP15N5500E: Ceramic Diplexer 2.45/5.5 Ghz
/ 5.5GHz WLAN Ceramic Diplexer (BPF/BPF type). LGA bottom terminations Reel Quanity Storage Period Power Capacity *18 months in vacuum sealed bag and 1 week cumulative after opened. Terminal Configuration
MAFL-011013: Diplexer Broadband Catv
Features · 75 Ohm· SMT unit· RoHS compliant· Excellent temperature stability· Excellent repeatability M/A-COM's is a low cost, SMT diplex filter designed for CATV, DTV, DBS, cable modem Ground Low pass
0892DP14A1850T: Diplexer Lpf/hpf 892mhz/1850mhz
Input Power Impedance Operating Temperature Reel Quanity No. Function 1 Low Band Port (P3) 2 GND 3 High Band Port (P1) 4 GND 5 Common. Port (P2) 6 GND Mounting Considerations Mount these devices with brown
ACMD-7617-BLK: Duplexer Fbar Mini
The Avago is a highly miniaturized duplexer designed for use in Digital Enhanced Cordless Telecommunications (DECT) applications operating in UMTS Band MHz UL, ­ 2170 MHz DL). Low Insertion Loss in the Tx channel

ACMD-7617-TR1
DP03A2450TTR: Diplexer 2450 Mhz
The 0603 diplexer is a best in class low profile multilayer organic passive device that is based on AVX's patented multilayer organic high density interconnect technology. The MLOTM diplexer uses high

DP03A2450TTR/500
FI212P0892M5-T: Duplexer Filter Hi Freq Multilay
DPX162170DT-8022B1: Diplexer
Insertion Loss (dB) Return Loss (dB) Attenuation (dB) Characteristic Impedance Return Loss (dB) Attenuation (dB) Characteristic Impedance
ACMD-7602-BLKG: Duplexer Fbar Umts Band1 2.5x3mm
The Avago is a miniature duplexer designed for use in UMTS Band I handsets. Maximum Insertion Loss in the Tx channel is only 1.5 dB, which minimizes current drain from the power amplifier. Insertion Loss

ACMD-7602-TR1
ACMD-7602-TR1G
FI212P082931-T: Filter Diplexer
Notice : All the technical data and specifications are subject to change without prior notice. This product is only intended for use in general communications applications and not intended for applications
ACFM-7101-TR1: Quintplexer Filter Module 5x8mm
Tape & Reel (TR) Alternate Packaging ; 824MHz ~ 894MHz / 1.85GHz ~ 1.99GHz ;
ACFM-7103-TR1: Quintplexer Filter Module 4x7mm
Tape & Reel (TR) Alternate Packaging ; 824MHz ~ 894MHz / 1.85GHz ~ 1.99GHz ;