Details, datasheet, quote on part number: 7004C-02-ZF-15
DescriptionNetwork Interface Device
CompanyBourns Electronic
DatasheetDownload 7004C-02-ZF-15 datasheet


Features, Applications

Accepts POTS lines & Coaxial Protector Manufactured from high-impact resistant, ultraviolet-desensitized, flame retardant, UL Recognized plastic Optional sealed switching jacks with Insulation Displacement Connectors (IDCs)

Subscriber lockable with Telco override Convenient ground attachment UL Listed per UL 497 (File: E53117)

Bourns Model 7004C NID provides a secure and weather resistant enclosure for Telco service for residential or commercial installations. The 7004C supplies station protection and test access points and can be configured for a maximum of two POTS lines and one 1740-xx coax protector. The 7004C features convenient cable knockouts and generous working space for wire management.

Model Number Designator Number of Twisted Pairs 0 = None 1 = One 2 = Two Station Protector Options 455HS-MSP (2377-45-HS) Voice/Data/DSL (UL,cUL) 455HS-BC* (2377-45-BC) Balance-Sensitive DSL (UL, cUL) 155HS-MSP (2378-35-HS) Voice/DSL/Data (UL, cUL) 155HS-BC* (2378-35-BC) Balance-Sensitive DSL (UL, cUL) 125EW (2374-01) Dual Gas Tube (UL, cUL, Telcordia) 125EW-R (2375-01) Dual Gas Tube (UL, cUL, RUS) 356M (2377-01) Balanced Gas Tube (UL, cUL, RUS) J130S (2380-27-01) Solid State Protector (UL, cUL) Tii355M No Station Protectors

*For DSL systems requiring capacitive balance within 1 pF. Note 1 = Digi.Guard - 356 size, RUS Maximum Duty. Note 2 = Digi.Guard - 125 size, RUS Heavy Duty. Special Options H = Security Screw in security plate S = Sealed Switching Jack w/IDC F = Sealed Switching Jack 4-Post (85122-T4) Coax Protector Options % DC Breakdown @ 100 V/Sec) % DC Breakdown @ 100 V/Sec) % DC Breakdown @ 100 V/Sec) B = Expansion Bridge w/Binding Posts I = Expansion Bridge w/IDC = No options (standard 85122 jack)

To add lines, use station protector + 85122 Standard Jack 85122-T4 Sealed Switching Jack, 4-post 85122-T-IDC Sealed Switching Jack w/IDC

REV. A 07/06 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.

*Includes environmental sealant and closed-cell foam gasket.

Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.


Related products with the same datasheet
Some Part number from the same manufacture Bourns Electronic
7004C-02-ZF-23 Network Interface Device
CHF5225CAF 60 W Power RF Flanged Chip Termination
MF-RX300 PTC Resettable Fuses
STMW-650-N Sealed Tact Switch
PT66006 T1/cept/isdn-pri Transformer
SNDX-6H-T DIP Switch (machine Insertable Type)
CD2010-B140 Cd2010-b160 - Surface Mount Schottky Rectifier Diode
4306H-101-222 Thick Film Molded SIPs
4600X Thick Film Conformal SIPs
4A12P-1AH-12R5 Surge Line Protection Module

84B1D-A20-J08L : 83/84 - 5/8 Square 10-turn

3315Y-125-016L : 9 mm Square Sealed Incremental Encoder

SDR1030-102K : SMD Power Inductors

PTA4553-2010DPB203 : Low Profile Slide Potentiometer

83C2C-A20-K10 : 83/84 - 5/8 Square 10-turn

84A1C-C12-K06L : 83/84 - 5/8 Square 10-turn

2026-23-C4LF : Gas Discharge Tube Arrestor (gdt) Circuit Protection 40kA 8x20s 230V Through Hole; GAS DISCHARGE TUBE Specifications: Packaging: Bulk ; Package / Case: Radial Cylinder, 3 Lead ; Mounting Type: Through Hole ; Spark Over Voltage: 230V ; Impulse Discharge Current: 40kA 8x20s ; Tolerance: 20% ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

4116R-1-330 : Resistor 33 Ohm 250mW 8 Resistors[number of pins] Pin Networks, Arrays; RES ARRAY 33 OHM 8 RES 16-DIP Specifications: Resistance (Ohms): 33 ; Tolerance: 1 Ohm ; Power Per Element: 250mW ; Circuit Type: Isolated ; Number of Pins: 16 ; Packaging: Tube ; Number of Resistors: 8 ; Package / Case: 16-DIP (0.300", 7.62mm) ; Mounting Type: Through Hole ; Temperature Coefficient: 250ppm/C ; Lead Free Stat

4610X-104-162/260L : Resistor 26, 1.6K Ohm 200mW 16 Resistors[number of pins] Pin Networks, Arrays; RES NET MULT OHM 16 RES 10-SIP Specifications: Resistance (Ohms): 26, 1.6K ; Tolerance: 2 Ohm, 2% ; Power Per Element: 200mW ; Circuit Type: Dual Terminator ; Number of Pins: 10 ; Packaging: Bulk ; Number of Resistors: 16 ; Package / Case: 10-SIP ; Mounting Type: Through Hole ; Temperature Coefficient: 100ppm/C ; Lead Free St

3223W-1-104 : Ohm Trimmer Potentiometers, Variable Resistors Top Adjustment 11 Turn; TRIMMER 100K OHM 0.125W SMD Specifications: Resistance (Ohms): 100K ; Power (Watts): 0.125W, 1/8W ; Number of Turns: 11 ; Adjustment Type: Top Adjustment ; Tolerance: 20% ; Mounting Type: Surface Mount ; Temperature Coefficient: 100ppm/C ; Resistive Material: Cermet ; Packaging: Bulk ; Lead Free Status: Lead Free ; RoHS Sta

4311T-106-1382DA : RESISTOR, NETWORK, FILM, DIVIDER, 1.38 W, THROUGH HOLE MOUNT Specifications: Configuration: Chip Array ; Category / Application: General Use ; Technology / Construction: Thin Film (Chip) ; Mounting / Packaging: ThroughHole, SIP ; Tolerance: 0.5000 +/- % ; Temperature Coefficient: 100 ±ppm/°C ; Power Rating: 1.38 watts (0.0018 HP) ; Operating DC Voltage: 50

CRT0402-DZ-2002GAS : Thin Film Resistors - SMD 20k0 0.5% 63mW Bourns CRT-AS Sulfur-Resistant Thin Film Precision Chip Resistors operate in harsh environments exposed to high levels of sulfur contamination. Applications include industrial, automation, power supply, and communication base station. Bourns CRT-AS surface mount resistors are offered in four foot

0-C     D-L     M-R     S-Z