Details, datasheet, quote on part number: 7004C-02-ZB-23
DescriptionNetwork Interface Device
CompanyBourns Electronic
DatasheetDownload 7004C-02-ZB-23 datasheet


Features, Applications

Accepts POTS lines & Coaxial Protector Manufactured from high-impact resistant, ultraviolet-desensitized, flame retardant, UL Recognized plastic Optional sealed switching jacks with Insulation Displacement Connectors (IDCs)

Subscriber lockable with Telco override Convenient ground attachment UL Listed per UL 497 (File: E53117)

Bourns Model 7004C NID provides a secure and weather resistant enclosure for Telco service for residential or commercial installations. The 7004C supplies station protection and test access points and can be configured for a maximum of two POTS lines and one 1740-xx coax protector. The 7004C features convenient cable knockouts and generous working space for wire management.

Model Number Designator Number of Twisted Pairs 0 = None 1 = One 2 = Two Station Protector Options 455HS-MSP (2377-45-HS) Voice/Data/DSL (UL,cUL) 455HS-BC* (2377-45-BC) Balance-Sensitive DSL (UL, cUL) 155HS-MSP (2378-35-HS) Voice/DSL/Data (UL, cUL) 155HS-BC* (2378-35-BC) Balance-Sensitive DSL (UL, cUL) 125EW (2374-01) Dual Gas Tube (UL, cUL, Telcordia) 125EW-R (2375-01) Dual Gas Tube (UL, cUL, RUS) 356M (2377-01) Balanced Gas Tube (UL, cUL, RUS) J130S (2380-27-01) Solid State Protector (UL, cUL) Tii355M No Station Protectors

*For DSL systems requiring capacitive balance within 1 pF. Note 1 = Digi.Guard - 356 size, RUS Maximum Duty. Note 2 = Digi.Guard - 125 size, RUS Heavy Duty. Special Options H = Security Screw in security plate S = Sealed Switching Jack w/IDC F = Sealed Switching Jack 4-Post (85122-T4) Coax Protector Options % DC Breakdown @ 100 V/Sec) % DC Breakdown @ 100 V/Sec) % DC Breakdown @ 100 V/Sec) B = Expansion Bridge w/Binding Posts I = Expansion Bridge w/IDC = No options (standard 85122 jack)

To add lines, use station protector + 85122 Standard Jack 85122-T4 Sealed Switching Jack, 4-post 85122-T-IDC Sealed Switching Jack w/IDC

REV. A 07/06 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.

*Includes environmental sealant and closed-cell foam gasket.

Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.


Related products with the same datasheet
Some Part number from the same manufacture Bourns Electronic
7004C-02-ZB-35 Network Interface Device
CHF5225CAF 60 W Power RF Flanged Chip Termination
MF-RX300 PTC Resettable Fuses
STMW-650-N Sealed Tact Switch
PT66006 T1/cept/isdn-pri Transformer
SNDX-6H-T DIP Switch (machine Insertable Type)
CD2010-B140 Cd2010-b160 - Surface Mount Schottky Rectifier Diode
4306H-101-222 Thick Film Molded SIPs
4600X Thick Film Conformal SIPs

84D3B-C16-J08L : 83/84 - 5/8 Square 10-turn

83D1C-B20-J06L : 83/84 - 5/8 Square 10-turn

CI100505-47NJ : Multi-layer Chip Inductors

CRM2512-FX-10R0ELF : 10 Ohm 2W Chip Resistor - Surface Mount; RES 10.0 OHM 2W 1% 2512 SMD Specifications: Resistance (Ohms): 10 ; Power (Watts): 2W ; Tolerance: 1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

4816P-T02-105 : Resistor 1M Ohm 80mW 15 Resistors[number of pins] Pin Networks, Arrays; RES ARRAY 1M OHM 15 RES 16-SOIC Specifications: Resistance (Ohms): 1M ; Tolerance: 2% ; Power Per Element: 80mW ; Circuit Type: Bussed ; Number of Pins: 16 ; Packaging: Tube ; Number of Resistors: 15 ; Package / Case: 16-SOIC (0.220", 5.59mm Width) ; Mounting Type: Surface Mount ; Temperature Coefficient: 100ppm/C ; Lead Free S

3362P-1-104LF : Ohm Trimmer Potentiometers, Variable Resistors Top Adjustment Single Turn; TRIMMER 100K OHM 0.5W TH Specifications: Resistance (Ohms): 100K ; Power (Watts): 0.5W, 1/2W ; Number of Turns: Single ; Adjustment Type: Top Adjustment ; Tolerance: 10% ; Mounting Type: Through Hole ; Temperature Coefficient: 100ppm/C ; Resistive Material: Cermet ; Packaging: Tube ; Lead Free Status: Lead Free ; RoHS St

4420T-1-5420BAL : RESISTOR, NETWORK, FILM, ISOLATED, 2 W, SURFACE MOUNT Specifications: Configuration: Chip Array ; Category / Application: General Use ; Technology / Construction: Thin Film (Chip) ; Mounting / Packaging: Surface Mount Technology (SMT / SMD), ROHS COMPLIANT ; Tolerance: 0.1000 +/- % ; Temperature Coefficient: 100 ±ppm/°C ; Power Rating: 2 watts (0.002

84A2DE12J06 : RES,TAPPED,WIREWOUND,200 OHMS,5% +/-TOL,7563 CASE Specifications: Potentiometer Type: Standard Potentiometer

WS2M1001J : Wirewound Resistors - Through Hole 1K0 2W 5% RES AX Bourns WS Series Wirewound Resistors are axial leaded and designed to withstand greater power surge. The resistors range from 1W to 8W and have a resistance range of 15 to 3.3K. This new series has been designed to operate at extreme temperatures from -55C to +200C. It has been designed to with

0-C     D-L     M-R     S-Z