Details, datasheet, quote on part number: 7004C-02-YF-35
DescriptionNetwork Interface Device
CompanyBourns Electronic
DatasheetDownload 7004C-02-YF-35 datasheet


Features, Applications

Accepts POTS lines & Coaxial Protector Manufactured from high-impact resistant, ultraviolet-desensitized, flame retardant, UL Recognized plastic Optional sealed switching jacks with Insulation Displacement Connectors (IDCs)

Subscriber lockable with Telco override Convenient ground attachment UL Listed per UL 497 (File: E53117)

Bourns« Model 7004C NID provides a secure and weather resistant enclosure for Telco service for residential or commercial installations. The 7004C supplies station protection and test access points and can be configured for a maximum of two POTS lines and one 1740-xx coax protector. The 7004C features convenient cable knockouts and generous working space for wire management.

Model Number Designator Number of Twisted Pairs 0 = None 1 = One 2 = Two Station Protector Options 455HS-MSP (2377-45-HS) Voice/Data/DSL (UL,cUL) 455HS-BC* (2377-45-BC) Balance-Sensitive DSL (UL, cUL) 155HS-MSP (2378-35-HS) Voice/DSL/Data (UL, cUL) 155HS-BC* (2378-35-BC) Balance-Sensitive DSL (UL, cUL) 125EW (2374-01) Dual Gas Tube (UL, cUL, Telcordia) 125EW-R (2375-01) Dual Gas Tube (UL, cUL, RUS) 356M (2377-01) Balanced Gas Tube (UL, cUL, RUS) J130S (2380-27-01) Solid State Protector (UL, cUL) Tii355M No Station Protectors

*For DSL systems requiring capacitive balance within 1 pF. Note 1 = Digi.Guard - 356 size, RUS Maximum Duty. Note 2 = Digi.Guard - 125 size, RUS Heavy Duty. Special Options H = Security Screw in security plate S = Sealed Switching Jack w/IDC F = Sealed Switching Jack 4-Post (85122-T4) Coax Protector Options % DC Breakdown @ 100 V/Sec) % DC Breakdown @ 100 V/Sec) % DC Breakdown @ 100 V/Sec) B = Expansion Bridge w/Binding Posts I = Expansion Bridge w/IDC = No options (standard 85122 jack)

To add lines, use station protector + 85122 Standard Jack 85122-T4 Sealed Switching Jack, 4-post 85122-T-IDC Sealed Switching Jack w/IDC

REV. A 07/06 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.

*Includes environmental sealant and closed-cell foam gasket.

Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.


Related products with the same datasheet
Some Part number from the same manufacture Bourns Electronic
7004C-02-YH-15 Network Interface Device
CHF5225CAF 60 W Power RF Flanged Chip Termination
MF-RX300 PTC Resettable Fuses
STMW-650-N Sealed Tact Switch
PT66006 T1/cept/isdn-pri Transformer
SNDX-6H-T DIP Switch (machine Insertable Type)
CD2010-B140 Cd2010-b160 - Surface Mount Schottky Rectifier Diode
4306H-101-222 Thick Film Molded SIPs

TISP4180H4BJ : Bidirectional Thyristor Overvoltage Protectors

3852A122102AL : Diameter Panel Control

84C1A-C12-J06L : 83/84 - 5/8 Square 10-turn

84E2C-A16-J06L : 83/84 - 5/8 Square 10-turn

3386P-1-500LF : Trimmer Resistors - Through Hole 3/8" 2Kohms 10% 0.5Watts Square Specifications: Manufacturer: Bourns ; Product Category: Trimmer Resistors - Through Hole ; RoHS:  Details ; Product Type: Single Turn ; Resistance: 2 KOhms ; Power Rating: 500 mWatts (1/2 Watt) ; Voltage Rating: 300 Volts ; Operating Temperature Range: - 55 C to + 125 C ; Tolerance: 10 % ; Adj

2307-V-RC : TOROIDAL INDUCTOR, 33UH, 11.7A, 15% Specifications: Inductance: 33ÁH ; Inductance Tolerance: ▒ 15% ; DC Resistance Max: 0.013ohm ; DC Current Rating: 11.7A ; Q Factor: - ; Self Resonant Frequency: - ; Q Test Frequency: - ; Core Material: - ; Inductor Case Style: Radial Leaded ; No. of Pins: 2 ; Lead Spacing: 13.462mm ; MSL: -

CRM2512-JW-222ELF : 2.2K Ohm 2W Chip Resistor - Surface Mount; RES 2.20K OHM 2W 5% 2512 SMD Specifications: Resistance (Ohms): 2.2K ; Power (Watts): 2W ; Tolerance: ▒5% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: ▒200ppm/░C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

3314S-2-101E : Ohm Trimmer Potentiometers, Variable Resistors Side Adjustment Single Turn; TRIMMER 100 OHM 0.25W SMD Specifications: Resistance (Ohms): 100 ; Power (Watts): 0.25W, 1/4W ; Number of Turns: Single ; Adjustment Type: Side Adjustment ; Tolerance: ▒20% ; Mounting Type: Surface Mount ; Temperature Coefficient: ▒100ppm/░C ; Resistive Material: Cermet ; Packaging: Tape & Reel (TR) ; Lead Free Status: L

0502-050M500-CE504 : RES,TAPPED,CARBON,500K OHMS,10% +/-TOL,8563 CASE Specifications: Potentiometer Type: Standard Potentiometer

TISP4165J3BJ : 165 V, 60 A, SILICON SURGE PROTECTOR, DO-214AA Specifications: ITSM: 60 amps ; Standards and Certifications: RoHS ; Package Type: ROHS COMPLIANT, PLASTIC, SMBJ, 2 PIN ; Pin Count: 2

SRP1265A-R33M : FIXED IND 330NH 46A 800 UOHM SMD The SRP series high-current-shielded power inductor for automotive applications is manufactured with a carbonyl powder core featuring high-saturation current and shielded construction for low magnetic radiation. Available inductances for SRP1038A, SRP1238A, SRP1265A, and SRP70

0-C     D-L     M-R     S-Z