|Category||Timing Circuits => Oscillators|
|Description||Frequency Range = 155.52MHz, 166.6286, 167.3316MHz ;; Output Logic = Complementary Lvpecl ;; Package (mm) = 13.8 X 9.1 X 5.5 ;; Features = Hcmos|
|Datasheet||Download XO-480 datasheet
|Stable high frequency XO with HCMOS/LVPECL output. Packaged crystal provide low aging.
9 mm SMD package 166.6286, 167.3316 MHz 3.3 V supply voltage LVPECL output HCMOS
Frequency: Package Size: Supply Voltage: Supply Current: Output Type: Temperature Range/Stability: Accuracy @ +25°C: Aging: Frequency vs. Supply: Frequency vs. Load: Storage Temperature: 155.52 MHz, 167.3316 MHz mm 3.3 Vdc 70 mA max. LVPECL 105 ±10 ppm over 205 ±20 ppm over +85°C ±5 ppm 2 ppm for the first year 1 ppm per year thereafter ±3 ppm for ±5% change ±1 ppm for ±5% change to +105°CVectron International 267 Lowell Road, Hudson, NH 03051 Tel: 1-88-VECTRON-1 Web: www.vectron.com
Pin Function N/C Enable/Disable Ground, case RF Output Complementary RF output Supply Voltage UB
|Related products with the same datasheet|
|Some Part number from the same manufacture Vectron International|
|XO-480-DFD-105A Frequency Range = 155.52MHz, 166.6286, 167.3316MHz ;; Output Logic = Complementary Lvpecl ;; Package (mm) = 13.8 X 9.1 X 5.5 ;; Features = Hcmos|
|XO-500 Frequency Range = 15MHz - 200MHz ;; Output Logic = Complementary Pecl ;; Package (mm) = 13.97 X 8.89 X 4.49 ;; Features = Low Phase Noise, Custom Options|
|Z-5Series Stratum 3 Tcxo's|
|VC-710 Voltage Controlled Crystal OscillatorThe VC-710 is a voltage controlled crystal oscillator thatoperates at the fundamental frequency of the internal HFFcrystal. The HFF crystal is a high-Q quartz|
|VC-715 LVPECL Voltage Controlled Crystal OscillatorThe VC-715 is a voltage controlled crystal oscillator thatoperates at the fundamental frequency of the internal crystal.The crystal is a high-Q quartz|
|C5430 Dual OutputTwo selectable outputfrequencies|
|VC-400/401/411/415 Voltage Controlled Crystal Oscillators (VCXO’s)Low jitter capable, PECL output VCXO in a DIP,Gull-wing or SMD package.|
|C5250 Previously Models MC025, MC031,MC034 and MC035|
|VTC4 Temperature Compensated Crystal Oscillators - TCXOVectron’s VTC4 Temperature CompensatedCrystal Oscillator (TCXO) is a quartz stabilized,clipped sine wave output, temperaturecompensated oscillator,|
|VTC1 Temperature Compensated Crystal Oscillators - TCXOVectron’s VTC1 Temperature CompensatedCrystal Oscillator (TCXO) is a quartz stabilized,clipped sinewave output or CMOS squarewave,temperature compensated|
|C2260 Temperature Compensated Crystal Oscillators - TCXOVectron’s VTC4 Temperature CompensatedCrystal Oscillator (TCXO) is a quartz stabilized,clipped sine wave output, temperaturecompensated oscillator,|
|OSC OSC SeriesVectron International has introduced a series of low-profile,low cost, surface mount, Temperature CompensatedCrystal Oscillators (TCXOs) available in frequenciesfrom 10 MHz to 50 MHz.|
|C2310 Temperature Compensated Crystal Oscillators - TCXOVectron’s VTC4 Temperature CompensatedCrystal Oscillator (TCXO) is a quartz stabilized,clipped sine wave output, temperaturecompensated oscillator,|
|C4400 OCXORoHS and Lead FreeAssembly CompliantSmall size OCXOExcellent stabilitiesclose to S3ESMD optional|
EX-385-CAF-ST3-G : Frequency Range = 10MHz - 80MHz ;; Output Logic = Hcmos Sine (EX-385) ;; Package = 0.50" X 0.8" X 0.3" ;; Features = +3.3 VDC Low Profile Stratum 3
FTVGLJ : Frequency Range = 1MHz - 35MHz ;; Output = TTL / CMOS ;; Package = 20.8 X 13.2 ;; Features = Industry Standard Metal CAN
M55310/26-C63C : 25MHz - 65MHz Crystal Oscillator
VC-401-GDF-505H : Frequency Range = 10MHz - 170MHz ;; Output = Ecl / Pecl ;; Package (mm) = Single Dip, Gull Wing or True Surface Mount FR4 ;; Features = 155.52 MHZ Prototypes Available in 2 Weeks
MQF21.4-1200-10 : Monolithic Crystal Filter
VTC4-D43C-12M800 : Voltage Controlled Temperature Compensated Crystal Oscillator
QF1.4-U0200 : Monolithic Crystal Filter
FX-104-CFC-D236 : Frequency Translator
FX-104-CFF-A1XS : Frequency Translator
FX-104-DFF-A378 : Frequency Translator
OC-160AAB-308BF-10 : Oven Controlled Crystal Oscillators
A127A : Crystal 4.915200mhz.
ABM3 : Crystal Oscillators. 5.0 X 3.2 X 1.5 MM Ceramic Glass Sealed 8.0MHz to 60MHz.
ASVASV1 : Crystal Oscillators. 7.0 X 5.08 X 1.8 MM 3.3Vdc 1.5MHz to 150MHz Revised 1/2003.
CDCV857A : . Phase-Lock Loop Clock Driver for Double Data-Rate Synchronous DRAM Applications Spread Spectrum Clock Compatible Operating Frequency: to 180 MHz Low Jitter (cyccyc): ±50 ps Distributes One Differential Clock Input to Ten Differential Outputs Three-State Outputs When the Input Differential Clocks Are <20 MHz Operates From Dual 2.5-V Supplies Available.
CDCVF2509PW : PLL-Based Clock Buffers (Zero-Delay). ti CDCVF2509, 3.3-V Phase-lock Loop Clock Driver.
ICS8430DY-111 : 700MHz Low Jitter Lvpecl Frequency Synthesizer. Dual differential 3.3V LVPECL output Selectable to 27MHz differential CLK, nCLK or TEST_CLK input CLK, nCLK accepts any differential input signal: LVPECL, LVHSTL, LVDS, SSTL, HCSL TEST_CLK accepts the following input types: LVCMOS, LVTTL Output frequency range to 700MHz VCO range: to 700MHz Parallel or serial interface for programming counter and output.
ICS9148-12 : Clock Circuits. Pentium/pro(tm) System Clock Chip. The is a Clock Synthesizer chip for Pentium and PentiumPro CPU based Desktop/Notebook systems that will provide all necessary clock timing. include four strong CPU, seven PCI and eight SDRAM clocks. Two reference outputs are available equal to the crystal frequency. Stronger drive CPUCLK outputs typically provide greater than 1 V/ns slew rate into 20pF.
ICS9148-93 : Clock Circuits. Frequency Generator & Integrated Buffers For Pentium/pro(tm).
ICS9169C-271 : Frequency Generator For Pentium(tm) Based Systems. The is a low-cost frequency generator designed specifically for Pentium based chip set systems. The integrated buffer minimizes skew and provides all the clocks required. A 14.318 MHz XTAL oscillator provides the reference clock to generate standard Pentium frequencies. The CPU clock makes gradual frequency transitions without violating the PLL timing.
ID82C84A : CMOS Clock Generator Driver. The Intersil is a high performance CMOS Clock Generatordriver which is designed to service the requirements of both CMOS and NMOS microprocessors such as the 80C88, 8086 and the 8088. The chip contains a crystal controlled oscillator, a divide-bythree counter and complete "Ready" synchronization and reset logic. Static CMOS circuit design permits operation.
MK2059 : Multiplier/De-Jitter Circuits. Lowphase Noise Communications Clock. The is a VCXO (Voltage Controlled Crystal Oscillator) based clock generator that produces common telecommunications reference frequencies. The output clock is phase locked an 8kHz (frame rate) input reference clock. The MK2059-01 also provides jitter attenuation. Included in the selection of output frequencies are these common system clocks: 1.544 MHz (T1).
MQF10.0-1600/04 : Monolithic Crystal Filter (MCF). Pole No. = 8 ;; Loss /dB = 4.0 ;; Passband /dB = 6.0 ;; Passband /±kHz = 8.00 ;; Ripple /dB = 1.5 ;; Ripple /±kHz = 6.0 ;; Stopband /dB = 60 ;; Stopband /±kHz = 20.00 ;; Stopband /dB = 80 ;; Stopband /±kHz = 25.00 ;; Impedance R/ohm = 9000 ;; Impedance C/pf = -1.50 ;; Remarks = ;; Case.
PLL520-47 : , 65-130MHz In, 65-130MHz Out, CMOS. CMOS Low Phase Noise VCXO (for 65-130MHz Fund Xtal) to 130MHz Fundamental Mode Crystal. Output range: 130MHz (no PLL). Low Injection Power for crystal 50uW. CMOS outputs. Integrated variable capacitors. Supports 3.3V-Power Supply. Available in 16 pin (TSSOP or SOIC). is a VCXO IC specifically designed to pull frequency fundamental crystals from to 130MHz,.
TB31251FL : Dual or Single = Dual ;; = Integer - N ;; Power Supply V = 2.4 ~ 3.6 ;; Ima = 6.0 ;; Input FMHZ = 500 ~ 1400 ;; Operating Freq-mhz = 5 ~ 20 ;; Sensitivity DBµmV = 92 ~ 107 ;; Package = QON16 ;; Production Status = MP.
VC-FXO-65F : Crystal Oscillators. Frequency: 840 MHZ. ¡It is a compact and thin ceramic package with a metalized lead for surface mounting that is able to be automatically loaded. ¡Reflow soldering is possible. Item Application Supply Voltage Frequency Range Load Frequency Stability Frequency Tuning Range Frequency Linearity Operating Temperature Range Storage Temperature Range H Output Level L Output.
VCD2-203 : Tight Stability ± 20 PPM Product (-40 to 85°C). Package Option Frequency Range Supply Voltage/ Load: Electrical: Enable/Disable: Stability: Start-Up: Load: Current: Jitter: STD Package: Typical P/N: mm 4 pad SMD to 52.0 MHz Vdc 10 % Tristate 55/45 Symmetry Logic NC = Enable (Oscillation) Logic 0 or GND = Disable (High Impedance) ± 20 PPM to +85°C for 10 years all parameters 10 ms Maximum HCMOS/TTL.
VCO190-2670T : High Performance Signal Source. Model: VCO190-2670T Rev: A Date: 4/21/2003 Customer: VARI-L COMPANY Operating Temperature Range: ° C) Parameter Frequency Range Tuning Voltage: 2620 MHz 2720 MHz Tuning Sensitivity Output Power Output Phase Noise: 10 kHz 100 kHz Power Supply Current Harmonic Suppression: 2nd Harmonic 3rd Harmonic Spurious (Non-Harmonic) Frequency Pushing 4.75-5.25 V Frequency.
VF946 : . HCMOS/TTL Compatible TriState Hybrid VCXO 6 Pin Ceramic Package Parameter Input Break Down Voltage Storage Temp. Control Voltage Frequency Range Frequency Stability Input Voltage Input Current Load Duty Cycle Rise/Fall Time Logic "1" Level Tristate Output Standard Small 6 Pin DIP Compatible with the popular Stype VCXO Industrial Temperature Range.
VXD7 : Crystal Oscillators. 267 Lowell Road Hudson, NH 03051 USA Tel: 603-598-0070 Fax: 603-578-3071 http://www.viteonline.com/ Package: Frequency Range: Mode: UM-1 Surface Mount Gull wing 7.0 MHz to 200.0 MHz 1 = Fundamental = 3rd Overtone = 5th Overtone ± 100 PPM from ± 50 PPM from ± 100 PPM from ± 50 PPM from ± 25 PPM from 0 = Series Resonant 30 pF ± 25 PPM 25°C 80 ohms max.