Details, datasheet, quote on part number: BUF600AU
PartBUF600AU
CategoryAnalog & Mixed-Signal Processing => Amplifiers => High Speed/Video Amplifiers => Current Feedback
Descriptionti BUF600, High-speed Buffer Amplifier
CompanyTexas Instruments, Inc.
DatasheetDownload BUF600AU datasheet
Quote
Find where to buy
 
  

 

Features, Applications

FEATURES

q OPEN-LOOP BUFFER q HIGH-SLEW RATE: 5.0Vp-p q BANDWIDTH: 0.2Vp-p q LOW INPUT BIAS CURRENT: 0.7A/1.5A q LOW QUIESCENT CURRENT: 3mA/6mA q GAIN FLATNESS: to 300MHz

APPLICATIONS

q VIDEO BUFFER/LINE DRIVER q INPUT/OUTPUT AMPLIFIER FOR MEASUREMENT EQUIPMENT q PORTABLE SYSTEMS q TRANSMISSION SYSTEMS q TELECOMMUNICATIONS q HIGH-SPEED ANALOG SIGNAL PROCESSING q ULTRASOUND

DESCRIPTION

The BUF600 and BUF601 are monolithic open-loop unity-gain buffer amplifiers with a high symmetrical slew rate to 3600V/s and a very wide bandwidth at 5Vp-p output swing. They use a complementary bipolar IC process, which incorporates pn-junction isolated high-frequency NPN and PNP transistors to achieve high-frequency performance previously unattainable with conventional integrated circuit technology. Their unique design offers a high-performance alternative to expensive discrete or hybrid solutions. The BUF600 and BUF601 feature low quiescent current, low input bias current, small signal delay time and phase shift, and low differential gain and phase errors. The BUF600 with 3mA quiescent current is wellsuited for operation between high-frequency processing stages. It demonstrates outstanding performance even in feedback loops of wide-band amplifiers or phase-locked loop systems.

The BUF601, with 6mA quiescent current and therefore lower output impedance, can easily drive 50 inputs or 75 systems and cables. The broad range of analog and digital applications extends from decoupling of signal processing stages, impedance transformation, and input amplifiers for RF equipment and ATE systems to video systems, distribution fields, IF/communications systems, and output drivers for graphic cards.

International Airport Industrial Park Mailing Address: PO Box 11400, Tucson, AZ 85734 Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 Tel: (520) 746-1111 Twx: 910-952-1111 Internet: http://www.burr-brown.com/ FAXLine: (800) 548-6133 (US/Canada Only) Cable: BBRCORP Telex: 066-6491 FAX: (520) 889-1510 Immediate Product Info: (800) 548-6132

SPECIFICATIONS

At VCC = 5V, RLOAD = 10k, RSOURCE = 50, and TAMB = +25C, unless otherwise noted. BUF600AP, AU PARAMETER INPUT OFFSET VOLTAGE Initial vs Temperature vs Supply (tracking) vs Supply (non-tracking) vs Supply (non-tracking) INPUT BIAS CURRENT Initial vs Temperature vs Supply (tracking) vs Supply (non-tracking) vs Supply (non-tracking) INPUT IMPEDANCE INPUT NOISE Voltage Noise Density Signal-to-Noise Ratio TRANSFER CHARACTERISTICS to 100MHz S/N = 20 Log (0.7/(Vn 5MHz)) Voltage Gain; VIN = 2.5V RLOAD = 100 RLOAD = 200 RLOAD = 10k RATED OUTPUT Voltage Output VIN = 2.7V RLOAD = 100 RLOAD = 200 DC, RLOAD V/V CONDITIONS MIN TYP MAX 30 54 MIN BUF601AU TYP MAX 30 UNITS mV V/C dB A nA/C A/V A/V nA/V M pF nV/ Hz dB

DC Current Output Impedance POWER SUPPLY Rated Voltage Derated Performance Quiescent Current TEMPERATURE RANGE Specification Storage

At VCC = 5V, RLOAD 200 (BUF600) and 100 (BUF601), RSOURCE = 50, and TAMB = +25C, unless otherwise noted. BUF600AP, AU PARAMETER FREQUENCY DOMAIN LARGE SIGNAL BANDWIDTH (3dB) SMALL SIGNAL BANDWIDTH GROUP DELAY TIME DIFFERENTIAL GAIN VIN 0.7V BUF600 RLOAD = 200 RLOAD 1k BUF601 RLOAD = 100 RLOAD = 500 VIN 0.7V BUF600 RLOAD = 200 RLOAD 1k BUF601 RLOAD = 100 RLOAD = 5Vp-p, COUT = 2.8Vp-p, COUT = 1.4Vp-p, COUT = 0.2Vp-p, COUT = 1pF MHz ps CONDITIONS MIN TYP MAX MIN BUF601AU TYP MAX UNITS

At VCC = 5V, RLOAD 200 (BUF600) and 100 (BUF601), RSOURCE = 50, and TAMB +25 C, unless otherwise noted. BUF600AP, AU PARAMETER HARMONIC DISTORTION Second Harmonic Third Harmonic Second Harmonic Third Harmonic Second Harmonic Third Harmonic GAIN FLATNESS PEAKING to 300MHz LINEAR PHASE DEVIATION to 300MHz TIME DOMAIN RISE TIME 700ps 1.4Vp-p Step 2.8Vp-p Step 5.0Vp-p Step 5.0Vp-p ns V/s Degrees dB CONDITIONS = 1.4Vp-p MIN TYP MAX MIN BUF601AU TYP MAX UNITS dBc

FUNCTION In Out +VCC VCC DESCRIPTION Analog Input Analog Output Positive Supply Voltage; typical +5VDC Negative Supply Voltage; typical 5VDC

This integrated circuit can be damaged by ESD. Burr-Brown recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

Power Supply Voltage.......................................................................... 6V Input Voltage(1)......................................................................... VCC 0.7V Operating Temperature..................................................... to +85C Storage Temperature...................................................... to +125C Junction Temperature.................................................................... +150C Lead Temperature (soldering, 10s)................................................ +300C NOTE: (1) Inputs are internally diode-clamped to VCC.

PACKAGE Plastic 8-Pin DIP SO-8 Surface Mount SO-8 Surface Mount

NOTE: (1) For detailed drawing and dimension table, please see end of data sheet, or Appendix C of Burr-Brown IC Data Book. The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant any BURR-BROWN product for use in life support devices and/or systems.


 

Some Part number from the same manufacture Texas Instruments, Inc.
BUF601
BUF601AU ti BUF601, High-speed Buffer Amplifier
BUF634
BUF634F ti BUF634, 250mA High-speed Buffer
CAHCT1G04QDCKRQ1 ti SN74AHCT1G04-Q1, Automotive Catalog Single Inverter Gate
CAHCT1G125QDCKRQ1 ti SN74AHCT1G125-Q1, Automotive Catalog Single Bus Buffer Gate With 3-State Output
CAHCT1G126QDCKRQ1 ti SN74AHCT1G126-Q1, Automotive Catalog Single Bus Buffer Gate With 3-State Output
CD14538B CMOS Dual Precision Monostable Multivibrator
CD14538BE ti CD14538B, CMOS Dual Precision Monostable Multivibrator (1250C Operation)
CD4000AFB ti CD4000A, Dual 3-Input NOR GATE Plus Inverter
CD4001AFB ti CD4001A, CMOS Quad 2-Input NOR GATE
CD4001B CMOS NOR GATEs
CD4001BE ti CD4001B, CMOS Quad 2-Input NOR GATE
CD4001UB CMOS Quad 2-input NOR GATE
CD4001UBE ti CD4001UB, CMOS Quad 2-Input NOR GATE
CD4002B CMOS NOR GATEs
CD4002BE ti CD4002B, CMOS Dual 4-Input NOR GATE
CD4006B CMOS 18-stage Static Shift Register
CD4006BE ti CD4006B, CMOS 18-Stage Static Shift Register
CD4007UB CMOS Dual Complementary PaIR Plus Inverter
CD4007UBE ti CD4007UB, CMOS Dual Complementary PaIR Plus Inverter
 
0-C     D-L     M-R     S-Z