|Category||Semiconductors => Power Management => LCD/OLED Display Bias Solutions|
|Part family||BUF11704 18-V Supply Multi-Channel Gamma Correction Buffer|
|Description||18-V Supply Multi-Channel Gamma Correction Buffer 28-HTSSOP -25 to 85|
|Company||Texas Instruments, Inc.|
|Datasheet||Download BUF11704 datasheet
|Pin nb||Package type||Ind std||JEDEC code||Package qty||Carrier||Device mark||Width (mm)||Length (mm)||Thick (mm)||Pitch (mm)|
|• Driving Capacitive Loads with Gamma Buffers | Doc|
FEATURES D Wide Supply Range: V D Gamma Correction Channels: 10, 6, and 4 D Integrated VCOM Buffer D Excellent Output Current Drive:
- Gamma Channels: 0.5 V Swing Rails(1) - VCOM: 100 mA typ 2 V Swing to Rails(1) Large Capacitive Load Drive Capability Rail-to-Rail Output PowerPAD Package Low-Power/Channel: 500 µA High ESD Rating: 8 kV HBM, 2 kV CDM, V MM Specified for to +85°CDESCRIPTION
The BUFxx704 are a series of multi-channel buffers targeted towards gamma correction in high-resolution LCD panels. They are pin-compatible with the existing BUFxx702 and BUFxx703 family and operate at higher supply voltages (19 V absolute max). The higher supply voltage enables faster response times and brighter images in large-screen LCD panels. This is especially important in LCD TV applications. The number of gamma correction channels required depends on a variety of factors and differs greatly from design to design. Therefore, 10, 6, and 4 channel options are offered. For additional space and cost savings, a VCOM channel with > 100mA drive capability is integrated into the BUF11704, BUF07704, and BUF05704. The BUF07704, BUF06704, and BUF05704 are available in the TSSOP-20, TSSOP-14, and TSSOP-16 PowerPAD packages for dramatically increased power dissipation capability. This way, a large number of channels can be handled safely in one package. A flow-through pin out has been adopted to allow simple PCB routing and maintain the cost-effectiveness of this solution. All inputs and outputs of the BUFxx704 incorporate internal ESD protection circuits that prevent functional failures at voltages 8 kV (HBM), 2 kV (CDM), and 300 V (MM).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PowerPAD is a trademark of Texas Instruments Incorporated. All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
over operating free-air temperature range unless otherwise noted(1) PARAMETERS Supply Voltage, VDD(2) Input Voltage Range, VI Continuous Total Power Dissipation Operating Free-Air Temperature Range, TA Maximum Junction Temperature, TJ Storage Temperature Range, TSTG Lead Temperature 1.6mm (1/16 inch) from Case for 10s ESD Rating: Human Body Model (HBM) Charged-Device Model (CDM) Machine Model (MM) BUFxx704 19 ±VDD See Dissipation Rating Table °C kV UNIT V
V (1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) All voltage values are with respect to GND.
PRODUCT PACKAGE-LEAD PACKAGE DESIGNATOR(1) PWP SPECIFIED TEMPERATURE RANGE to +85°C PACKAGE MARKING BUF07704 BUF11704 ORDERING NUMBER BUF11704AIPWP BUF11704AIPWPR TRANSPORT MEDIA, QUANTITY Tube, 94 Reels, 2000 Tube, 94 Reels, 2000 Tube, 70 Reels, 2000 Tube, 50 Reels, 2000
(1) For the most current specification and package information, refer to our web site at www.ti.com. (2) Available Q3 2004
PACKAGE TYPE TSSOP-20 TSSOP-16 PACKAGE DESIGNATOR PWP (28) PWP (20) PWP (16) JC(1) (°C/W) 2.07 qJA(1) (°C/W) TA 25°C POWER RATING 2.74 2.67TSSOP-14 PWP 2.07 (1) PowerPAD attached to PCB, 0 lfm airflow, and x 76mm copper area.
MIN Supply Voltage, VDD Operating Free-Air Temperature, 7 -25 NOM MAX 18 +85 UNIT V °C
INPUT STAGE OF BUFFERS to 5 and VCOM to 3 and VCOM to 2 and VCOM VS INPUT STAGE OF BUFFERS to 4 OUTPUT STAGE OF ALL BUFFERSNext Stage Next Stage Buffer Input Buffer Output Buffer Input Buffer Output Next Stage Next Stage
Over operating free-air temperature range, VDD = 25°C, unless otherwise noted. PARAMETER Gamma buffers VIO Input offset voltage VCOM IIB PSRR Input bias current Power-Supply Rejection Ratio Buffer gain SR 3dB bandwidth Slew rate Gamma buffers VCOM buffer Gamma buffers VCOM buffer = VDD/2 VDD = 100 pF, = 100 pF, 2 k VIN 16 V VIP-P = 1 kHz = 9V TEST CONDITIONS TA 25°C Full range(1) 25°C Full range(1) 25°C Full range(1) 25°C Full 25°C dB V/V MHz V/µs pA -1 MIN TYP -1 MAX mV UNIT
|Related products with the same datasheet|
|Some Part number from the same manufacture Texas Instruments, Inc.|
|BUF11704AIPWP 18-v Supply Multi-channel Gamma Correction Buffer|
|BUF600AP ti BUF600, High-speed Buffer Amplifier|
|BUF601AU ti BUF601, High-speed Buffer Amplifier|
|BUF634F ti BUF634, 250mA High-speed Buffer|
|CAHCT1G04QDCKRQ1 ti SN74AHCT1G04-Q1, Automotive Catalog Single Inverter Gate|
|CAHCT1G125QDCKRQ1 ti SN74AHCT1G125-Q1, Automotive Catalog Single Bus Buffer Gate With 3-State Output|
|CAHCT1G126QDCKRQ1 ti SN74AHCT1G126-Q1, Automotive Catalog Single Bus Buffer Gate With 3-State Output|
|CD14538B CMOS Dual Precision Monostable Multivibrator|
|CD14538BE ti CD14538B, CMOS Dual Precision Monostable Multivibrator (1250C Operation)|
|CD4000AFB ti CD4000A, Dual 3-Input NOR GATE Plus Inverter|
|CD4001AFB ti CD4001A, CMOS Quad 2-Input NOR GATE|
|CD4001B CMOS NOR GATEs|
|CD4001BE ti CD4001B, CMOS Quad 2-Input NOR GATE|
|CD4001UB CMOS Quad 2-input NOR GATE|
|CD4001UBE ti CD4001UB, CMOS Quad 2-Input NOR GATE|
|CD4002B CMOS NOR GATEs|
|CD4002BE ti CD4002B, CMOS Dual 4-Input NOR GATE|
|CD4006B CMOS 18-stage Static Shift Register|
PCM1773PWR : Audio DACs ti PCM1773, Low Voltage & Low Power Stereo Audio DAC With Lineout Amplifier
SNJ54LS253J : Multiplexers ti SN54LS253, Dual 4-Line to 1-Line Data Selectors/multiplexers With 3-State Outputs
TL5632C : 8-bit 3-channel High-speed Digital-to-analog Converter
TPS79928DDCRG4 : 200mA Low Quiescent Current, Ultra-Low Noise, High PSRR LDO The TPS799xx family of low-dropout (LDO) low-power linear regulators offer excellent AC performance with very low ground current. High power-supply rejection ratio (PSRR), low noise, fast start-up, and excellent line and load transient r
ADS5545 : 14 Bits 170MSPS ADC With LVDS/CMOS Outputs The ADS5545 is a high performance 14-bit 170-MSPS ADC. Using an internal sample and hold and low jitter clock buffer this ADC supports high SNR and high SFDR at high IF. With programmable options for parallel CMOS and LVDS outputs, this device is availabl
SN74LVC1G18DBVRG4 : 32-bit BUS Transceiver WITH 3-state Outputs
TLC5945RHB : 16-channel LED Driver WITH DOT Correction AND Grayscale PWM Control
OPA835IRUNR : Ultra Low Power, Rail To Rail Out, Negative Rail In, VFB Amplifier Fabricated using the industry-leading BiCom-3x (SiGe complimentary bipolar) process, the OPA835 and OPA2835 are single and dual ultra low-power, rail-to-rail output, negative rail input, voltage-feedback operational amplifiers desig
COP8SGR728M8/NOPB : 8-BIT, OTPROM, 10 MHz, MICROCONTROLLER, PDSO28 Specifications: Life Cycle Stage: ACTIVE ; Clock Speed: 10 MHz ; ROM Type: OTP ; Supply Voltage: 4.5 to 5.5 volts ; I/O Ports: 24 ; Package Type: SOIC, Other, PLASTIC, SOIC-28 ; Operating Range: Auto ; Pin Count: 28 ; Operating Temperature: -40 to 125 C (-40 to 257 F) ; Features: PWM
FPD63310 : Universal Interface Xga Panel Timing Controller (ui-xpat) Reduced Swing Differential Sginaling (rsds) (obsolete).
STC708T : UP Supervisor Circuits. Precision supply-voltage monitor 708Y) 200ms reset pulse width Debounced TTL/CMOS-compatible manualreset input Independent watchdog timer 1.6sec time-out (not available for STC707/708/708T/708S/R/Z/Y) Reset output signal: - Active-low only (STC705/706/706T/S/R/Z/Y) - Active-high only (STC813L/M/T/S/R/706P) - Active-high and active-low (707/708/708T/S/R).
TDC685K16CB : Tantalum Capacitors. INTRODUCTION The TD Series, due to its good electrical characteristics, is recommended for professional and industrial applications. The extremely stable oxide layer of the TD solid tantalum capacitor allows only a very low leakage current even after long storage. The solid electrolyte provides stable electrical performance over wide ranges and long.
25YXG4700M16X40 : Miniature Aluminum Electrolytic Capacitors.
74VHCT86 : QUAD Exclusive OR GATE. HIGH SPEED: tPD 5 ns (TYP.) at VCC = 5V LOW POWER DISSIPATION: ICC 2 µA (MAX.) 25 oC COMPATIBLE WITH TTL OUTPUTS: VIH = 2V (MIN), VIL = 0.8V (MAX) POWER DOWN PROTECTION ON INPUTS & OUTPUTS SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL 8 mA (MIN) BALANCED PROPAGATION DELAYS: tPLH tPHL OPERATING VOLTAGE RANGE: VCC (OPR) to 5.5V PIN AND FUNCTION COMPATIBLE.
TB2510W : 25.0a Single-phase Bridge Rectifier. High forward surge current capability Ideal for printed circuit board High temperature soldering guaranteed: 260°C/10 seconds, 5 lbs (2.3kg) tension RoHS Compliant Case: Polarity: Terminals: Mounting Position: Weight: Molded plastic body with Metal Heat Sink Polarity symbols marked on case Plated 0.25" (6.35mm) lug Thru hole for screw,20 in -lbs. torque.
7371 : Lamps 12V .04A. s: Manufacturer: Chicago Miniature ; Product Category: Lamps ; RoHS: No ; Lamp Type: Incandescent ; Lamp Base Type: Bi-Pin ; Lamp Size: T-1 3/4 ; Voltage: 12 V ; MSCP: 0.12 MSCP ; Life Hours: 10000 Hrs ; Packaging: Bulk ; Factory Pack Quantity: 100.
VJ1210A152KBBAT4X : 1500pF Ceramic Capacitor 1210 (3225 Metric) 100V; CAP CER 1500PF 10% 100V NP0 1210. s: Capacitance: 1500pF ; Voltage - Rated: 100V ; Tolerance: ±10% ; Package / Case: 1210 (3225 Metric) ; Temperature Coefficient: C0G, NP0 ; Packaging: Tape & Reel (TR) ; : Soft Termination, High Voltage ; Lead Spacing: - ; Operating Temperature: -55°C ~ 125°C ; Mounting.
PTRONMONF09S : COAXIAL SUPPRESSOR, N CONNECTOR. s: Series: - ; DC Breakover Voltage: - ; Impulse Discharge Current: - ; Impulse Sparkover Voltage: 600V ; GDT Case Style: -.
20EB11 : 250V 20A Line Filter Filter Power Line; FILTER POWER LINE EMI 20A FASTON. s: Inductance: - ; Current: 20A ; Filter Type: Power Line ; Termination Style: Fast-On ; Mounting Type: Chassis Mount ; Voltage - Rated: 250V ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant.
TNPW2512680RBEEG : 680 Ohm 0.5W, 1/2W Chip Resistor - Surface Mount; RES 680 OHM 1/2W 0.1% 2512. s: Resistance (Ohms): 680 ; Power (Watts): 0.5W, 1/2W ; Tolerance: ±0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: ±25ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
E3X-A51 : Amplifiers SENSOR PHOTO AMP USE W/E32 FIBER -; SENSOR PHOTO AMP USE W/E32 FIBER. s: Amplifier Type: Standard ; Voltage - Supply: 10 V ~ 30 V ; Current - Supply: 35mA ; Output Type: PNP ; Mounting Type: DIN Rail ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Compliant by Exemption.
TSAL6200-AS21 : LAMP,IRED,940NM PEAK WAVELENGTH,LED-2B. s: LED Type: Infrared. High Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs Package type: leaded Package form: T-1¾ Dimensions (in mm): Ø 5 Peak wavelength: = 940 nm High reliability High radiant power High radiant intensity Angle of half intensity: ± 17° Low forward voltage Suitable for high pulse current operation Good spectral matching with Si photodetectors is an infrared,.
95253-101ALF : 13 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT. s: Connector Type: TWO PART BOARD CONNECTOR ; Gender: Male ; Termination Types: PCBSolder ; Number of Contacts: 13 ; RoHS Compliant: RoHS.