Details, datasheet, quote on part number: TDA8395P
PartTDA8395P
CategoryMultimedia => Video => Decoders
Description
CompanyPhilips Semiconductors (Acquired by NXP)
DatasheetDownload TDA8395P datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Preliminary specification File under Integrated Circuits, IC02 October 1991
FEATURES Fully integrated filters Alignment free For use with baseband delay GENERAL DESCRIPTION

The is a self-calibrating, fully integrated SECAM decoder. The IC should preferably be used in conjunction with the PAL/NTSC decoder or TDA8366 and with the switched capacitor baseband delay circuit TDA4660. The IC incorporates HF and LF filters, a demodulator and an identification circuit (luminance is not processed in this IC). The IC needs no adjustments and very few external components are required. A highly stable reference frequency is required for calibration and a two-level sandcastle pulse for blanking and burst gating. QUICK REFERENCE DATA SYMBOL VP Ptot V16(p-p) VO(p-p) PARAMETER positive supply voltage; pin 3 total power dissipation composite video input voltage (peak-to-peak value); pin 16 -(R-Y) output voltage amplitude (peak-to-peak value); pin 9 -(B-Y) output voltage amplitude (peak-to-peak value); pin MIN. TYP. MAX. mW V UNIT

ORDERING INFORMATION PACKAGE EXTENDED TYPE NUMBER PINS TDA8395 Note SOT38-1; 1996 December 3. 16 PIN POSITION DIL MATERIAL plastic CODE SOT38GE1(1)

PINNING SYMBOL fref/ IDENT TEST VP n.c. GND CLOCHEref PLLref -(R-Y) -(B-Y) n.c. Fig.2 Pin configuration SAND CVBS PIN DESCRIPTION reference frequency input/identification input test output positive supply voltage not connected not connected ground Cloche reference filter PLL reference -(R-Y) output -(B-Y) output not connected not connected not connected not connected sandcastle pulse input video (chrominance) input


 

Related products with the same datasheet
TDA8395P/N2
TDA8395P/N3
TDA8395T
TDA8395T/N1
TDA8395T/N2
TDA8395T/N3
Some Part number from the same manufacture Philips Semiconductors (Acquired by NXP)
TDA8395P/N2
TDA8415 TDA8415; TV And VTR Stereo/dual Sound Processor With Integrated Filters And I²C-bus Control
TDA8417 TDA8417; TV And VTR Stereo/dual Sound Processor With Integrated Filters And I²C-bus Control
TDA8421 TDA8421; Hi-fi Stereo Audio Processor; I²C Bus
TDA8424 TDA8424; Hi-fi Stereo Audio Processor; I²C-bus;; Package: SOT146-1 (DIP20)
TDA8425 TDA8425; Hi-fi Stereo Audio Processor; ²C-bus;; Package: SOT146-1 (DIP20)
TDA8426 Hi-fi Stereo Audio Processor, I2C-bus
TDA8433 Deflection Processor For Computer Controlled TV Receivers
TDA8440 TDA8440; Switch For CTV Receivers
TDA8443A TDA8443A; I²C-bus Controlled Yuv/rgb Switch
TDA8444 TDA8444; TDA8444T; TDA8444AT; Octuple 6-bit DACs With I²C-bus;; Package: SOT162-1 (SO16)
TDA8501 TDA8501; Pal/ntsc Encoder
TDA8505 TDA8505; Secam Encoder
TDA8510 TDA8510J; 26 W BTL And 2 X 13 W se Power Amplifiers;; Package: SOT243-1 (DBS17P)
TDA8511 TDA8511J; 4 X 13 W Single-ended Power Amplifiers;; Package: SOT243-1 (DBS17P)
TDA8512 TDA8512J; 26 W BTL 2 X 13 W se or 4 X 13 W se Power Amplifier;; Package: SOT243-1 (DBS17P)
TDA8540 TDA8540; 4 X 4 Video Switch Matrix;; Package: SOT163 (SO20)
TDA8541 TDA8541; 1 W BTL Audio Amplifier;; Package: SOT96 (SO8), SOT97-1 (DIP8)
TDA8542 TDA8542TS; 2 X 0.7 W BTL Audio Amplifier;; Package: SOT266-1 (SSOP20)
TDA8542A TDA8542AT; 2 X 1.5 W BTL Audio Amplifier;; Package: SOT163 (SO20)
TDA8542T TDA8542TS; 2 X 0.7 W BTL Audio Amplifier;; Package: SOT266-1 (SSOP20)

74LVC11DB : 74LVC11; Triple 3-input And Gate;; Package: SOT108-1 (SO14), SOT337-1 (SSOP14), SOT402-1 (TSSOP14)

74LVT04 : 74LVT04; 3.3 V Hex Inverter;; Package: SOT108-1 (SO14), SOT337-1 (SSOP14), SOT402-1 (TSSOP14)

74LVT162244B : 74LVT162244B; 3.3 V 16-bit Buffer/driver With 30 Ohm Termination Resistors;; Package: SOT362-1 (TSSOP48), SOT370-1 (SSOP48)

BLV859 : Power BLV859; UHF Linear Push-pull Power Transistor

BZX585-B/C11 : BZX585 Series; Voltage Regulator Diodes

HEF40195BD : 4-bit Universal Shift Register

P87C51FB-4B : 80c51 8-bit Microcontroller Family 8k.64k/256.1k Otp/rom/romless, Low Voltage 2.7v.5.5v, Low Power, High Speed 33 MHZ

PHB65N06T : Trenchmos (tm) Transistor Standard Level Fet

PLVA653A : Low-voltage Avalanche Regulator Diodes

SAA7221HS/C1 : MPEG/JPEG/H.261 SAA7215; SAA7216; SAA7221; Integrated Mpeg Avgd Decoders

TDA1060T : Control Circuit For SMPS

TDA1517A : TDA1517ATW; 8 W BTL or 2 X 4 W se Power Amplifier;; Package: SOT527-1 (HTSSOP20)

Same catergory

AN608P : Preamp/Amp. Wide Bandwidth Video Amplifier ic In-phase Amplifier. Wide bandwidth video amplifier IC (in-phase amplifier) The is an amplifier IC with 20 dB gain, a non-inverted output and a wide bandwidth It is best suited to video amplifier and sense amplifier. Wide bandwidth (10 MHz) 20 dB non-inverting amplifier 4-pin SIP plastic package Parameter Supply voltage Circuit voltage Total consumption current Circuit.

AN8497SA : CD. Package =. The is a PWM output 3-channel driver IC supporting linear inputs, and best suited for an actuator and a motor drive for CD-ROM and DVD-ROM. Due to its linear input, a conventional system can be used only by replacing a driver. And, due to an adoption of PWM output, you can reduce considerably power consumption compared with a conventional driver. Further.

AN8771NFH : MD. Package =. The an MD pre-amplifier IC of wide range of supply voltage (VCC to 5.5 V). This IC can form an MD system using 3-beam pick-up in combination with the MN66614 digital signal processing LSI. Applicable for 3-beam pick-up RF signal processing Error signal generating function for servo Various status detection function Laser power control circuit QFP064-P-1010.

BA3571FS : Audio PreAmp/Amp. Headphone Driver For Portable CD Players. The BA3571F is headphone drivers designed for portable CD players. An oscillation damper is not needed at the headphone output, minimizing external components. Includes a bass boost circuit which enables setting of the bass boost with external components. ! 1) An external oscillation damper is not needed. 2) Includes a bass boost circuit making it possible.

BA7207AK : . The BA7207AS and BA7207AK are LSI components that incorporate the contain circuitry required for SECAM chroma signal processing. The ICs have both recording and playback systems and each includes a bell filter, a bandpass filter, a limiter amplifier, a multiply-by-four circuit, a divide-by-four circuit, and a sync-gate circuit. Applications SECAM and VHS format.

LM1208 : RGB Video Amp. 130 Mhz/85 MHZ RGB Video Amplifier System With Blanking (discontinued).

ML6460 : NTSC Video Encoder With Macrovision. The is a multi-standard CCIR656 (4:2:2) video (input) composite and S-video (outputs) encoder for NTSC systems. It is designed to provide a low cost, single-chip output interface for a variety of video applications including set-top decoders, DVD players, and other YCrCb to Y/C equipment. The ML6460 accepts 8-bit YCrCb video in either CCIR656 or Square.

MM1111 : 2-Input 1-Output Video Switch/3-Input 1-Output Video Switch. These ICs are video switches for video / audio signal switching, with 3-input 1-output. The series includes those with and without built-in clamp and 6dB amp circuits. Circuit configuration tables and block diagrams are as follows. MM1118 is used as the representative model in this . Model name # of Inputs of Outputs 6dB amplifier No Yes No Yes No Yes No Yes Clamp.

NJW1132A : Audio Processor With Sound Enhancement. s GENERAL The is a sound processor with sound enhancement (BBE). It includes all of functions processing audio signal for TV, such as tone control, balance, volume, mute, and AGC functions. Also the NJW1132A performs surround and sound enhancement. The sound enhancement regenerates high definitive and nearly real sound. All of internal status and variables.

SAA4997H : PAL/SECAM. SAA4997H; Vertical Reconstruction ic (VERIC) For Palplus. Preliminary File under Integrated Circuits, IC02 1996 Oct 24 PALplus decoding Vertical reconstruction Quadrature mirror filter Luminance and chrominance processing Controlling. GENERAL The VErtical Reconstruction IC (VERIC) for PALplus (VERIC) is especially designed for use in conjunction with the Motion Adaptive Colour Plus And Control IC (MACPACIC).

SAA7327 : Decoder servo. SAA7327; Digital Servo Processor And Compact Disc Decoder With Integrated DAC For Video CD (CD7 II);; Package: SOT393-1 (QFP64).

SSM2160 : Switch/Controls. 6-Channel, Clickless Serial Input Balance/master Volume Control.

STA306 : Multichannel Digital Audio Processor With DDX(TM). MULTICHANNEL DIGITAL AUDIO PROCESSOR WITH DDXTM 6 DDXTM Channels Capability (24 bit) From to 192kHz Input Sample Rates Supported Volume Control from (0.5 dB steps) Variable Digital Gain from 24dB (0.5dB steps) with Digital Limiter Functionality and Variable Attack and Release Time I2S Inputs and Outputs Individual Channel and Master Gain/ Attenuation.

TDA1023 : Single Channel. TDA1023/T; Proportional-control Triac Triggering Circuit.

TDA7496 : 5W+5W Amplifier With DC Volume Control. 5+5W OUTPUT POWER = 8 @THD = 10% VCC = 22V ST-BY AND MUTE FUNCTIONS LOW TURN-ON TURN-OFF POP NOISE LINEAR VOLUME CONTROL DC COUPLED WITH POWER OP. AMP. NO BOUCHEROT CELL NO ST_BY RC INPUT NETWORK SINGLE SUPPLY RANGING TO 35V SHORT CIRCUIT PROTECTION THERMAL OVERLOAD PROTECTION INTERNALLY FIXED GAIN SOFT CLIPPING VARIABLE OUTPUT AFTER VOLUME CONTROL.

TDA8132 : TV & VCR. 5.1V + 12V Disable Voltage Regulator. Output Currents to 1A Fixed Precision Output 1 Voltage ± 2% Fixed Precision Output 2 Voltage ± 2% Output 1 with Disable by TTL Input Output 2 with Disable by TTL Input Short Circuit Protection at both Outputs Thermal Protection Low Drop Output Voltage The is a monolithic dual positive voltage regulator designed to provide fixed precision output voltages.

TDA8946 : TDA8946J; 2 X 15 W Stereo Bridge Tied Load (BTL) Audio Amplifier;; Package: SOT243-1 (DBS17P).

MAX9532 : DirectDrive Video Amplifier With Short-to-Battery Protection The MAX9532 DirectDrive® video filter amplifier is specifically designed to work in harsh environments such as automobiles. The MAX9532 provides integrated short-to-battery protection, allowing the output of the device to survive shorts up to 18V. Maxim\'s DirectDrive technology eliminates.

 
0-C     D-L     M-R     S-Z