Details, datasheet, quote on part number: TDA837XFamily
PartTDA837XFamily
CategoryMultimedia => Set-Top Box => Digital NTSC/PAL
TitleDigital NTSC/PAL
DescriptionI*2c-bus Controlled Economy Pal/ntsc And NTSC Tv-processors
CompanyPhilips Semiconductors (Acquired by NXP)
DatasheetDownload TDA837XFamily datasheet
  

 

Features, Applications

TDA837x family I2C-bus controlled economy PAL/NTSC and NTSC TV-processors
Preliminary specification File under Integrated Circuits, IC02 1997 Jul 01

FEATURES Available in all ICs: Vision IF amplifier with high sensitivity and good figures for differential phase and gain PLL demodulator for the IF signal Alignment-free sound demodulator Flexible source selection with a CVBS input for the internal signal and Y/C or CVBS input for the external signal Audio switch The output signal of the CVBS (Y/C) switch is externally available Integrated chrominance trap and band-pass filters (auto-calibrated) Luminance delay line integrated A symmetrical peaking circuit in the luminance channel Black stretching of non-standard CVBS or luminance signals RGB control circuit with black current stabilization and white point adjustment Linear RGB inputs and fast blanking Horizontal synchronization with two control loops and alignment-free horizontal oscillator Slow start and slow stop of the horizontal drive pulses Vertical count-down circuit Vertical driver optimized for DC-coupled vertical output stages I2C-bus control of various functions Low dissipation Small amount of peripheral components compared with competition ICs. Table 1 TV receiver versions SDIP56 PACKAGE TV RECEIVERS ECONOMY PAL only PAL/NTSC (SECAM) NTSC TDA8374B TDA8374 and TDA8374A TDA8373 MID/HIGH END - TDA8375 and TDA8375A TDA8377 and TDA8377A GENERAL DESCRIPTION

The various versions of the TDA837x series are I2C-bus controlled single-chip TV processors which are intended to be applied in PAL/NTSC (TDA8374 and TDA8375) and NTSC (TDA8373 and TDA8377) television receivers. All ICs are available an SDIP56 package and some versions are also available a QFP64 package. The ICs are pin compatible so that with one application board NTSC and PAL/NTSC (or multistandard together with the SECAM decoder TDA8395) receivers can be built. Functionally this IC series is split to 2 categories: Versions intended to be used in economy TV receivers with all basic functions Versions with additional functions such as E-W geometry control, horizontal and vertical zoom function and YUV interface which are intended for TV receivers with 110 picture tubes. The various type numbers are given in Table 1. The detailed differences between the various ICs are given in Table 2.

Table 2 Differences between the various ICs IC VERSION (TDA) CIRCUITS 8373 Multistandard IF Automatic Volume Levelling (AVL) PAL decoder SECAM interface NTSC decoder Colour matrix PAL/NTSC (Japan) Colour matrix NTSC (USA/Japan) YUV interface Horizontal geometry Horizontal and vertical zoom QUICK REFERENCE DATA SYMBOL Supplies VP IP Input voltages V10(p-p) V23-25(p-p) Output signals V6(p-p) I54 VoVSW V30(p-p) IF video output voltage (peak-to-peak value) tuner AGC output current range output signal level of video switch (peak-to-peak value) -(R - Y) output voltage (peak-to-peak value) video IF amplifiers sensitivity (RMS value) sound IF amplifiers sensitivity (RMS value) external audio input voltage (RMS value) external CVBS/Y input voltage (peak-to-peak value) external chrominance input voltage (burst amplitude) (peak-to-peak value) RGB input voltage (peak-to-peak value) supply voltage supply current PARAMETER CONDITIONS MIN. 8374A(H) 8374B(H)


 

Some Part number from the same manufacture Philips Semiconductors (Acquired by NXP)
TDA837xH TDA837x Family; I²C-bus Controlled Economy Pal/ntsc And NTSC Tv-processors
TDA8380A TDA8380A; Control Circuit For Switched Mode Power Supplies
TDA8385 Control Circuit For a Self-oscillating Power Supply (SOPS)
TDA8395 TDA8360; TDA8361; TDA8362; Integrated Pal And Pal/ntsc TV Processors
TDA8395P
TDA8415 TDA8415; TV And VTR Stereo/dual Sound Processor With Integrated Filters And I²C-bus Control
TDA8417 TDA8417; TV And VTR Stereo/dual Sound Processor With Integrated Filters And I²C-bus Control
TDA8421 TDA8421; Hi-fi Stereo Audio Processor; I²C Bus
TDA8424 TDA8424; Hi-fi Stereo Audio Processor; I²C-bus;; Package: SOT146-1 (DIP20)
TDA8425 TDA8425; Hi-fi Stereo Audio Processor; ²C-bus;; Package: SOT146-1 (DIP20)
TDA8426 Hi-fi Stereo Audio Processor, I2C-bus
TDA8433 Deflection Processor For Computer Controlled TV Receivers
TDA8440 TDA8440; Switch For CTV Receivers
TDA8443A TDA8443A; I²C-bus Controlled Yuv/rgb Switch
TDA8444 TDA8444; TDA8444T; TDA8444AT; Octuple 6-bit DACs With I²C-bus;; Package: SOT162-1 (SO16)
TDA8501 TDA8501; Pal/ntsc Encoder
TDA8505 TDA8505; Secam Encoder
TDA8510 TDA8510J; 26 W BTL And 2 X 13 W se Power Amplifiers;; Package: SOT243-1 (DBS17P)
TDA8511 TDA8511J; 4 X 13 W Single-ended Power Amplifiers;; Package: SOT243-1 (DBS17P)
TDA8512 TDA8512J; 26 W BTL 2 X 13 W se or 4 X 13 W se Power Amplifier;; Package: SOT243-1 (DBS17P)
TDA8540 TDA8540; 4 X 4 Video Switch Matrix;; Package: SOT163 (SO20)
Same catergory

CH7010 : Display Controller Device Which Accepts a Digital Graphics Input Signal, And Encodes And Transmits Data Through a Dvi (DFP CAN Also be Supported) or TV Output (analog Composite, S-video or RGB)..

HT8970 : Effects Processor. Voice Echo. Operating voltage: 4.5V~5.5V ADM algorithm Low noise - Echo mode:-85dB - Surround mode:-90dB Low distortion rate - Echo mode: 1% - Surround mode: 0.2% Built-in 20Kb SRAM Automatic reset function Package type: 16-pin DIP/SOP Applications The is an echo/surround effect processor. It is designed for various audio systems including karaoke, television,.

INA2134PA : Analog Line Drivers and Receivers. ti INA2134, Audio Differential Line Receivers, 0dB (G=1).

MT9160BE : Programmable Law. = 5V Multi-featured Phone Codec With Programmable U/a Law Companding ;; Package Type = Pdip ;; No. Of Pins = 24.

MX7228BQ : CMOS Octal 8-bit D/A Converter.

NJM2534 : 3-Input 1-Output Video Switch.

PT2399 : Digital Echo / Surround Processor. PT2399 is an Echo Audio Processor ic Utilizing CMOS Technology Which is Equipped With ADC And DAC..

S1A0292A01 : = S1A0292A01 Pb/rec eq ST Pre Amp ;; Function = Tape eq Amp ;; = 2CH Double Input Playback Amplifier,2CH Recording Amplifier, Bulit-in Recording Equalizer,tape Selector,alc Circuit,mute Circuit,operating Voltage (VCC = 6V - 12V) ;; Package = 48QFP ;; Production Status = Eol.

STA014 : Mpeg 2.5 Layer Iii Audio Decoder With Adpcm And SRS Wow%ae Postprocessing Capability.

STV7619DU : CRT & LCD Monitors. 64 Output Plasma Display Panel Scan Driver With 100MA/1A Source/sink Output MOS And 120V Absolute Maximum Supply.

TDA5930-5 : Video if Amplifier And Demodulator. Multistandard video IF Interference suppression circuitry Mean/peak value control Area of application: multistandard TV / VCR, mono, stereo cable converter, mono, stereo Circuit Video IF for all European standards. The analog setting function (delayed tuner AGC threshold) is controlled via a potentiometer. The IC is suitable for use in Euro- or multi-standard.

TLV320AIC15CDBT : Voice-Band Codecs. ti TLV320AIC15, Single Channel Codec. Texas Instruments (TI) has recently identified a problem in the product models listed above related to DLL clock-generation. When a clock-generation mode is used that powers up the delay-locked-loop (DLL), the DLL may not startup properly when initiated, resulting in the audio master clock not functioning. This results in the codec in the products not functioning.

AD9940 : High Speed, Correlated Double Sampler with Integrated Timing Driver The AD9940 is a high speed, correlated double sampler for high speed digital imaging applications. Integrated with a programmable timing driver using the Precision Timing core, the AD9940 a 56 MHz CDS amplifier with 6 dB of fixed gain, an internal voltage reference supply, and timing.

 
0-C     D-L     M-R     S-Z