|Category||Analog & Mixed-Signal Processing|
|Description||TDA8310; Pal/ntsc Colour Processor For Pip Applications|
|Company||Philips Semiconductors (Acquired by NXP)|
|Datasheet||Download TDA8310 datasheet
Preliminary specification File under Integrated Circuits, IC02 February 1995
FEATURES Multistandard vision IF circuit (positive and negative modulation) Video switch which automatically detects whether the incoming signal is CVBS or Y/C Integrated chrominance trap and bandpass filters (automatically calibrated) Integrated luminance delay line Automatic PAL/NTSC decoder which can decode all standards available in the world Easy interfacing with the TDA8395 (SECAM decoder) for multistandard applications Horizontal PLL with an alignment-free horizontal oscillator Vertical count-down circuit RGB/YUV and fast blanking switch with 3-state output and active clamping Low dissipation (560 mW) Small amount of peripheral components compared with competition ICs. ORDERING INFORMATION PACKAGE TYPE NUMBER NAME TDA8310 SDIP52 DESCRIPTION plastic shrink dual in-line package; 52 leads (600 mil) GENERAL DESCRIPTION
The is an alignment-free PAL/NTSC colour processor for Picture-in-Picture (PIP) applications. The circuit contains a vision IF amplifier, a PAL/NTSC colour decoder, horizontal and vertical synchronization and an RGB/YUV switch. As input for the colour decoder and sync processor the demodulated IF signal can be chosen but the circuit also has a video input which automatically detects whether the incoming signal is CVBS or Y/C. The output signals for the PIP processor are: Luminance signal Colour difference signals (U and V) Horizontal and vertical synchronization pulses. The RGB/YUV switch can select between two RGB or YUV sources, e.g. between the PIP processor and the SCART input signal. The supply voltage for the It is available a 52-pin SDIP package.
QUICK REFERENCE DATA SYMBOL VP IP Input voltages Vi(rms) V17,20(p-p) V16(p-p) Vi(p-p) Output signals Vo(p-p) V29 Vo(p-p) V36 Gv Control voltage Vcontrol control voltage for HUE - 5 demodulated CVBS output voltage (peak-to-peak value) tuner AGC control output voltage luminance output voltage (peak-to-peak value) (B-Y) output voltage (peak-to-peak value) (R-Y) output voltage (peak-to-peak value) horizontal sync pulse output voltage vertical sync pulse output voltage gain of the RGB switches vision IF amplifier input sensitivity (RMS value) CVBS/Y input voltage (peak-to-peak value) chrominance input voltage (peak-to-peak value) RGB/YUV input signal voltage amplitude (peak-to-peak value) supply current PARAMETER supply voltage (pins 19 and 41) - MIN. 7.2 TYP. 70 -
|Some Part number from the same manufacture Philips Semiconductors (Acquired by NXP)|
|TDA8310A TDA8310A; Pal/ntsc Colour Processor For Pip Applications;; Package: SOT247-1 (SDIP52)|
|TDA8315T TDA8315T; Integrated NTSC Decoder And SYNC Processor|
|TDA8340 Television if Amplifier And Demodulato (tuner Agc Output For N-p-n Tuners)|
|TDA83401 Television if Amplifier And Demodulator|
|TDA8341 Television if Amplifier And Demodulato (tuner Agc Output For N-p-n Tuners)|
|TDA8349A Multistandard if Amplifier And Demodulator|
|TDA8350 TDA8350Q; Dc-coupled Vertical Deflection And East-west Output Circuit;; Package: SOT141-6 (DBS13P)|
|TDA8351 TDA8351; Dc-coupled Vertical Deflection Circuit;; Package: SOT131-2 (SIL9P)|
|TDA8351A Dc-coupled Vertical Deflection Output|
|TDA8351AQ Dc-coupled Vertical Deflection Output Circuit|
|TDA8354Q TDA8354Q; Full Bridge Current Driven Vertical Deflection Output Circuit in Lvdmos|
|TDA8356 TDA8356; Dc-coupled Vertical Deflection Circuit;; Package: SOT131-2 (SIL9P)|
|TDA8357J TDA8357J; Full Bridge Vertical Deflection Output Circuit in Lvdmos|
|TDA8358 TDA8358J; Full Bridge Vertical Deflection Output Circuit in Lvdmos With East-west Amplifier;; Package: SOT141-6 (DBS13P)|
|TDA8359J TDA8359J; Full Bridge Vertical Deflection Output Circuit in Lvdmos|
|TDA8360 TDA8360; TDA8361; TDA8362; Integrated Pal And Pal/ntsc TV Processors|
|TDA8366 TDA8366; I²C-bus Controlled Pal/ntsc TV Processor|
|TDA836x Integrated Pal And Pal/ntsc TV Processors|
|TDA837 TDA837x Family; I²C-bus Controlled Economy Pal/ntsc And NTSC Tv-processors|
|TDA8370 Synchronization Processor For Television Receivers|
|TDA8373 TDA837x Family; I²C-bus Controlled Economy Pal/ntsc And NTSC Tv-processors|
74AHC2G241 : Dual Buffer/line Driver; 3-statedual Non-inverting Buffer/line Driver With 3-state Outputs. The 3-state Outputs Are Controlled BY The Output Enable Inputs 1OE And 2OE. A High Level at Pin 1OE Causes Output 1Y to Assume a High-impedance OFF-state. A Low Level at Pin 2OE Causes Output 2Y to Assu
74F725-1 : Multiplexers->Bipolar->F Family 74F723A; 74F723-1; 74F725A; 74F725-1; Various Quad Data Selector Multiplexers (3-State)
BB143 : BB143; Low-voltage Variable Capacitance Diode;; Package: SOD523 (I-IGIA, UFP)
BLF2047L90 : RF Specific BLF2047L/90; UHF Power Ldmos Transistor
BLY89C : Power BLY89C; VHF Power Transistor
BYQ28F-150 : BYQ28F Series; Rectifier Diodes Ultrafast
BZV90-C56 : BZV90 Series; Voltage Regulator Diodes
SAA4956TJS : SAA4956TJ; 2.9-Mbit Field Memory With Noise Reduction;; Package: SOT449-1 (SOJ40)
SCN26562C4 : Protocol Controllers SCN26562; Dual Universal Serial Communications Controller (DUSCC)
UDA1431T/C1 : General description The UDA1431T is a 16-bit, 48 kHz, single-chip stereo DAC employing bitstream conversion techniques. The UDA1431T supports the I2S-bus data format with word lengths of up to 24 bits, MSB justified and can be operated with a 256fs master clock mode. The audio outputs meet
2SA1941 : Transistor ( Power Amplifier Applications ).
2SC982TM : NPN Epitaxial Type ( Printer Drive, Core Driver And Led Drive, Low Frequency Amplifier Applications ).
5962-8767401GA : LM160 - High Speed Differential Comparator, Package: TO-5, Pin Nb=8. The is a very high speed differential input, complementary TTL output voltage comparator with improved characteristics over the µA760/µA760C, for which is a pin-for-pin replacement. The device has been optimized for greater speed, input impedance and fan-out, and lower input offset voltage. Typically delay varies only 3 ns for overdrive variations to 400 mV. Complementary.
A42L8316V : 256k X 16 CMOS Dynamic RAM With Edo Page Mode. Document Title X 16 CMOS DYNAMIC RAM WITH EDO PAGE MODE Revision History n Organization: 262,144 words X 16 bits n Part Identification A42L8316 (512 Ref.) n Single 3.3V power supply/built-in VBB generator n Low power consumption - Operating: 110mA (-30 max) - Standby: 2.5mA (TTL), 1.5mA (CMOS) 1.0mA (Self-refresh current) n High speed 30/35/40 ns RAS access.
BA4560 : . Dual high slew rate operational amplifier The BA4560, BA4560F, and BA4560N are dual operational amplifiers which achieve approximately twice the high output current of the BA4558, as well as featuring a higher slew rate 4V / µs, a gain band width of 10MHz, and an improved frequency characteristic. The following packages are available: 8-pin DIP (BA4560),.
LA7832 : Color TV Vertical Deflection Output Circuit. The is a monolithic linear IC for vertical deflection output for small and mid-sized color television sets that requires few external components and dissipates little power. When used in conjunction with the LA7620 series of video chroma deflection ICs, the LA7800 series of deflection ICs, and the LA7850 series of display ICs, it is possible to create.
LM2904 : Low Power Dual Op-amp. s INTERNALLY FREQUENCY COMPENSATED s LARGE DC VOLTAGE GAIN 100dB s WIDE BANDWIDTH (unity gain): 1.1MHz ESSENTIALLY INDEPENDENT OF SUPPLY VOLTAGE LOW INPUT BIAS CURRENT: 20nA (temperature compensated) LOW INPUT OFFSET CURRENT: 2nA INPUT COMMON-MODE VOLTAGE RANGE INCLUDES GROUND DIFFERENTIAL INPUT VOLTAGE RANGE EQUAL TO THE POWER SUPPLY VOLTAGE LARGE.
LMC6681 : Single. Single Low Voltage, Rail-to-rail Input And Output CMOS Amplifier With Powerdown (life-time Buy).
LT1812 : LT1812, 100MHz, 750V/µs 3mA Operational Amplifier With Shutdown. 100MHz Gain Bandwidth 750V/µs Slew Rate 3.6mA Maximum Supply Current Available in SOT-23 and S8 Packages 50µA Supply Current in Shutdown 8nV/Hz Input Noise Voltage Unity-Gain Stable 1.5mV Maximum Input Offset Voltage 4µA Maximum Input Bias Current 400nA Maximum Input Offset Current 40mA Minimum Output Current, VOUT ± 3.5V Minimum Input CMR, 5V 30ns.
MC100E1651FN : Dual Ecl Output Comparator With Latch. The MC10E1651 is functionally and pin-for-pin compatible with the MC1651 in the MECL III family, but is fabricated using Motorola's advanced MOSAIC III process. The MC10E1651 incorporates a fixed level of input hysteresis as well as output compatibility with 10KH logic devices. In addition, a latch is available allowing a sample and hold function to be performed.
MPC509AP : ti MPC509, 4-Channel Differential-input Analog Multiplexer. ANALOG OVERVOLTAGE PROTECTION: 70VPP NO CHANNEL INTERACTION DURING OVERVOLTAGE BREAK-BEFORE-MAKE SWITCHING ANALOG SIGNAL RANGE: ±15V STANDBY POWER: 7.5mW typ TRUE SECOND SOURCE The an 8-channel single-ended analog multiplexer and the a 4-channel differential multiplexer. The MPC508A and MPC509A multiplexers have input overvoltage protection. Analog.
NJM2121 : High Speed Operational Amplifier With Switch.
OP97 : Single. Low Power, High Precision Operational Amplifier. Low Supply Current: 600 A Max OP07 Type Performance Offset Voltage: 20 V Max Offset Voltage Drift: V/ C Max Very Low Bias Current 100 pA Max 250 pA Max High Common-Mode Rejection: 114 dB Min Extended Industrial Temperature Range: +85 C Available In Die Form PIN CONNECTIONS Epoxy Mini-DIP (P Suffix) 8-Pin Cerdip (Z Suffix) SO (S Suffix) The is a low power.
OPA642N : Wideband, Low Distortion, Low Gain Operational Amplifier. q LOW DISTORTION: 5MHz q GAIN OF +1 BANDWIDTH: 400MHz q AVAILABLE IN SOT23-5 PACKAGE q HIGH OPEN LOOP GAIN: 95dB q HIGH COMMON-MODE REJECTION: 90dB q FAST 12-BIT SETTLING: (0.01%) q LOW NOISE: 2.7nV/Hz q HIGH OUTPUT CURRENT: ±60mA q VERY LOW DIFF GAIN/PHASE ERROR: 0.007%/0.008° APPLICATIONS q ADC/DAC BUFFER AMPLIFIER q LOW DISTORTION IF AMPLIFIER q HIGH.
TGA1073A : 26- 34 GHZ Medium Power Amplifier. 0.25 um pHEMT Technology 19 dB Nominal Gain 25 dBm Nominal Pout P1dB -34.5 dBc @ 15.5 dBm SCL Bias 220 mA Chip Dimensions 1.12 mm The TriQuint is a three stage MPA MMIC design using TriQuint's proven 0.25 um Power pHEMT process. The TGA1073A is designed to support a variety of millimeter wave applications including point-to-point digital radio and LMDS/LMCS.
TL081CD : ti TL081, JFET-input General-purpose Operational Amplifier. Low Power Consumption Wide Common-Mode and Differential Voltage Ranges Low Input Bias and Offset Currents Output Short-Circuit Protection Low Total Harmonic Distortion. 0.003% Typ High Input Impedance. JFET-Input Stage Latch-Up-Free Operation High Slew Rate. 13 V/µs Typ Common-Mode Input Voltage Range Includes VCC+ The TL08x JFET-input operational amplifier.
TLV2381 : . FAMILY OF MICROPOWER RAIL-TO-RAIL INPUT AND OUTPUT OPERATIONAL AMPLIFIERS The TLV238x single supply operational amplifiers provide rail-to-rail input and output capability. The TLV238x takes the minimum operating supply voltage down 2.7 V over the extended industrial temperature range, while adding the rail-to-rail output swing feature. The TLV238x.
TLV4110 : Family of High Output Drive Operational Amplifiers With Shutdown. TLV4112, TLV4113 FAMILY OF HIGH OUTPUT DRIVE OPERATIONAL AMPLIFIERS WITH SHUTDOWN High Output Drive. >300 mA Rail-To-Rail Output Unity-Gain Bandwidth. 2.7 MHz Slew Rate. 1.5 V/µs Supply Current. 700 µA/Per Channel Supply Voltage Range. 6 V Specified Temperature Range: to 70°C. Commercial Grade to 125°C. Industrial Grade Universal OpAmp EVM The TLV411x.
MAX4245 : Ultra-Small, Rail-to-Rail I/O With Disable, Single/Dual-Supply, Low-Power Op Amps The MAX4245/MAX4246/MAX4247 family of low-cost op amps offer rail-to-rail inputs and outputs, draw only 320µA of quiescent current, and operate from a single +2.5V to +5.5V supply. For additional power conservation, the MAX4245/MAX4247 offer a low-power shutdown mode that.