|
Details, datasheet, quote on part number:PI7C8150
| |
Datasheet text preview:
PI7C8150
2-Port PCI-to-PCI Bridge
REVISION 1.04
2380 Bering Drive, San Jose, CA 95131 Telephone: 1-877-PERICOM, (1-877-737-4266) Fax: 408-435-1100 Email: solutions@pericom.com Internet: http://www.pericom.com
PI7C8150 2-PORT PCI-TO-PCI BRIDGE ADVANCE INFORMATION
LIFE SUPPORT POLICY Pericom Semiconductor Corporation's products are not authorized for use as critical components in life support devices or systems unless a specific written agreement pertaining to such intended use is executed between the manufacturer and an officer of PSC. 1) Life support devices or system are devices or systems which: a) Are intended for surgical implant into the body or b) Support or sustain life and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Pericom Semiconductor Corporation reserves the right to make changes to its products or specifications at any time, without notice, in order to improve design or performance and to supply the best possible product. Pericom Semiconductor does not assume any responsibility for use of any circuitry described other than the circuitry embodied in a Pericom Semiconductor product. The Company makes no representations that circuitry described herein is free from patent infringement or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent, patent rights or other rights, of Pericom Semiconductor Corporation. All other trademarks are of their respective companies.
ii March 19, 2003 Revision 1.04
PI7C8150 2-PORT PCI-TO-PCI BRIDGE ADVANCE INFORMATION
REVISION HISTORY
Date 07/16/02 08/06/02 Revision Number 1.01 1.02 Description First Release of Data Sheet Removed "TBD" parameters for TDELAY in sections 17.4 and 17.5 Added 256-ball PBGA package information, Ordering Information (18.1), and pin list. Corrected pin type for pins 127 and 128 to "undefined" in the pin list (section 2.3). 9/4/02 12/5/02 03/19/03 1.03 1.03 1.04 Added pin descriptions for pins MS0 and MS1 (section 2.2.4). Corrected Secondary IDSEL S_AD[31:16] condition in Table 4-6 Corrected Maximum Voltage on Input pins in section 17.1 Revised PBGA pin list to reflect MS0 and MS1 for pins B14 and R16 respectively. Corrected section reference on p17 from 5.3 to 4.3. Corrected bits 24 and 25 descriptions for section 14.1.28 Bridge Control Register Offset 3Ch. Corrected bit 4 description for section 14.1.29 Diagnostic / Chip Control Register Offset 40h. Corrected bits 24 through 31 descriptions in section 14.1.39 GPIO Data and Control Register Offset 64h. General corrections to reference numbers and page numbers.
iii March 19, 2003 Revision 1.04
|
|
