Details, datasheet, quote on part number: MPD-2
PartMPD-2
Category
Description
CompanyMini-Circuits
DatasheetDownload MPD-2 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

FREQUENCY POWER SCALE IMPEDANCE ISOLATION OUTPUT MHz IN (ohms) FACTOR (dB) POLARITY output RF1 load RF2 I mV/deg. RF2 Min. in-phase (dBm)

PHASE INSERTION LOSS RANGE (dB) (Degrees)
features

see case style outline drawings PORT IN OUT BIAS GND DEMO BOARD 8 1,7 all other pins 7 4,6 all other pins TB-122

JSPHS, J-lead surface mount SPH, plug-in hermetically sealed good vswr, 20% bandwidth low voltage bias control, to 15V low insertion loss, 1.2 dB typ.

C. 1. Non-hermetic 30 dB from to 400 MHz General Quality Control Procedures, Environmental Specifications, Hi-Rel and MIL description are given in General Information (Section 0). Connector types and case mounted options, case finishes are given in section 0, see "Case Styles & Outline Drawings". Prices and Specifications subject to change without notice. Absolute maximum power, voltage and current rating: 1a. RF Input power, 50mW 1b. Peak IF current, 20mA For ZRPD-1 DC output decreases 550 mV over 110 MHz as temperature decreases to -55C

1. 2. JSPHS models, Aqueous washable. Non-hermetic Environmental specifications and re-flow soldering information available in General Information Section. Connector types and case mounted options, case finishes are given in section 0, see "Case Styles & Outline Drawings". Prices and Specifications subject to change without notice. Maximum input power, 0 dBm Absolute maximum power, voltage and current ratings: 2a. Max. RF input power; +20 dBm 2b. Max. control voltage: 20V JSPHS-446

see case style outline drawings for pin locations PORT ec RF REF 1 DC OUT (I) 3,4 3 GND EXT. 2,5,6,7 4,5,6 CASE GND 2

For Custom Versions Of Standard Models Consult Our Applications Dept.


 

Related products with the same datasheet
JSPHS-12
JSPHS-150
JSPHS-26
JSPHS-446
MPD-1
MPD-21
RPD-1
RPD-2
SPH-16
SYPD-1
SYPD-2
Some Part number from the same manufacture Mini-Circuits
MPD-21
MSC-2-1 Power Splitter
MSC-3-1W
MSP2T-18
MSP2TA-18
MSW-2-20
MTS-18B
NBLP-117
NF-BF-10
NF-SF50
NHP-100
NIF-21.4
NLP-1.9
NM-BF-10
NM-SF50
P4DC-30A-2 Directional Coupler
PAS-1
PAT-1

BW-S10W5 :

ZC6PD-960 : Power Splitter Power Splitter

MAV-1SM : Monolithic Amplifiers 50 Ohm

ADCB-20-82+ : 1 MHz - 800 MHz RF/MICROWAVE BI-DIRECTIONAL COUPLER, 0.9 dB INSERTION LOSS-MAX Specifications: RF Coupler Type: Bi-Directional ; Package Type: 0.310 X 0.270 INCH, 0.160 INCH HEIGHT, ROHS COMPLIANT, CASE CD636, 6 PIN ; Impedance: 50 ohms ; Frequency Range: 1.00 to 800.00 MHz ; Insertion Loss: 0.90 dB

ERA-5SM+E : 0 MHz - 4000 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER Specifications: Amplifier Type: Power Amplifier ; Applications: RF Microwave ; RoHS Compliant: RoHS ; Frequency Range: 0.0 to 4000 MHz ; Minimum Gain: 12 dB ; Package Type: ROHS COMPLIANT, CASE WW107, MICRO-X, 4 PIN ; Nominal Impedance: 50 ; Operating Temperature: -45 to 85 C (-49 to 185 F)

ZFSC-2-1WB+ : 0.25 MHz - 300 MHz RF/MICROWAVE COMBINER, 1 dB INSERTION LOSS Specifications: Package Type / Form Factor: CASE K18 ; Frequency: 0.25 to 300.00 MHz ; Insertion Loss: 1.00 dB ; Operating Temperature: -50 to 100 C (-58 to 212 F)

ZFSC-2-2500B-S : 0.25 MHz - 300 MHz RF/MICROWAVE COMBINER, 1 dB INSERTION LOSS Specifications: Package Type / Form Factor: CASE K18 ; Frequency: 0.25 to 300.00 MHz ; Insertion Loss: 1.00 dB ; Operating Temperature: -50 to 100 C (-58 to 212 F)

ZN2PD2-63-S+ : 500 MHz - 5000 MHz RF/MICROWAVE COMBINER, 1.4 dB INSERTION LOSS Specifications: Package Type / Form Factor: CASE VVV845 ; Frequency: 500.00 to 5000.00 MHz ; Insertion Loss: 1.40 dB ; Operating Temperature: -55 to 100 C (-67 to 212 F)

ZNDC-15-2G-S : 800 MHz - 2000 MHz RF/MICROWAVE DIRECTIONAL COUPLER, 1.3 dB INSERTION LOSS-MAX Specifications: RF Coupler Type: Uni-Directional ; Package Type: CASE FM587 ; Impedance: 50 ohms ; Frequency Range: 800.00 to 2000.00 MHz ; Insertion Loss: 1.30 dB ; VSWR: 1.30 1

 
0-C     D-L     M-R     S-Z