Details, datasheet, quote on part number: ICM7240
PartICM7240
CategoryAnalog & Mixed-Signal Processing
Description8-Bit Binary, Programmable, RC Timer Counter
CompanyMaxim Integrated Products
DatasheetDownload ICM7240 datasheet
Quote
Find where to buy
 
  
Related products with the same datasheet
ICM7242
ICM7250
ICM7260
Some Part number from the same manufacture Maxim Integrated Products
ICM7240C/D Fixed And Programmable Timer/counters
ICM7242 8-Bit Binary, Programmable, RC Timer Counter
ICM7242C/D Fixed And Programmable Timer/counters
ICM7242IJA
ICM7250 8-Bit Binary, Programmable, RC Timer Counter
ICM7250C/D Fixed And Programmable Timer/counters
ICM7260 8-Bit Binary, Programmable, RC Timer Counter
ICM7260C/D Fixed And Programmable Timer/counters
ICM7555 Low-Power, General-purpose Timer
ICM7555/D General Purpose Timers
ICM7555I Low-Power, General-purpose Timer
ICM7555IJA General Purpose Timers
ICM7555M Low-Power, General-purpose Timer
ICM7555MJA General Purpose Timers
ICM7556 Low-Power, General-purpose Timer
ICM7556/D General Purpose Timers
ICM7556I Low-Power, General-purpose Timer
ICM7556ISD General Purpose Timers
ICM7556M Low-Power, General-purpose Timer
IH5040 Spst, Normally Open, CMOS Analog Switch
IH5040MJE/883B CMOS Ttl-compatible Analog Switches

MAX253CPA : -

MXD1005-100 : 5-Tap Silicon Delay Line

MAX1697TEUT#TG16 : 60mA, SOT23 Inverting Charge Pump With Shutdown The MAX1697 ultra-small, monolithic, CMOS charge-pump voltage inverter accepts an input voltage ranging from +1.25V to +5.5V. This device features an ultra-low 12? output resistance, permitting loads of up to 60mA with maximum efficiency. The MAX1697

LM75BIMM-3+T : Digital Temperature Sensor And Thermal Watchdog With 2-Wire Interface The LM75 temperature sensor includes a delta-sigma analog-to-digital converter, and a digital overtemperature detector. The host can query the LM75 through its I˛C interface to read temperature at any time. The open-drain overtem

MAX6733UTZWD3 : Single-/Dual-/Triple-Voltage µP Supervisory Circuits With Independent Watchdog Output The MAX6730–MAX6735 single-/dual-/triple-voltage microprocessor (µP) supervisors feature a watchdog timer and manual reset capability. The MAX6730–MAX6735 offer factory-set reset thresholds for monitoring voltages

MAX6735KARYD1-T : Single-/Dual-/Triple-Voltage µP Supervisory Circuits With Independent Watchdog Output The MAX6730–MAX6735 single-/dual-/triple-voltage microprocessor (µP) supervisors feature a watchdog timer and manual reset capability. The MAX6730–MAX6735 offer factory-set reset thresholds for monitoring voltages

MAX6316MUK31CY-T : 5-Pin µP Supervisory Circuits With Watchdog And Manual Reset The MAX6316–MAX6322 family of microprocessor (µP) supervisory circuits monitors power supplies and microprocessor activity in digital systems. It offers several combinations of push/pull, open-drain, and bidirectional (such as Motorola 68

MAX509BEAP : Quad, Serial, 8-Bit DACs With Rail-to-Rail Outputs The MAX509/MAX510 are quad, serial-input, 8-bit voltage-output digital-to-analog converters (DACs). They operate with a single +5V supply or dual ±5V supplies. Internal, precision buffers swing rail-to-rail. The reference input range includes both

MAX1425EAI : 10-Bit, 20Msps ADC The MAX1425 10-bit, monolithic analog-to-digital converter (ADC) is capable of a 20Msps sampling rate. This device features an internal track-and-hold (T/H) amplifier for excellent dynamic performance; at the same time, it minimizes the number of external components. Low input ca

MAX6858UK20D1+T : Pmic - Supervisor Integrated Circuit (ics) Simple Reset/Power-On Reset Tape & Reel (TR) 1; IC MPU SUPERVISOR SOT23-5 Specifications: Output: Push-Pull, Totem Pole ; Reset: Active Low ; Package / Case: SC-74A, SOT-753 ; Packaging: Tape & Reel (TR) ; Number of Voltages Monitored: 1 ; Reset Timeout: 10 ms Minimum ; Type: Simple Reset/Power-On Reset ; Voltage - Threshold: 2V ; Operating Temperature: -40°C ~ 85°C ;

MAX6865UK34D2S+T : Pmic - Supervisor Integrated Circuit (ics) Simple Reset/Power-On Reset Tape & Reel (TR) 1; IC MPU SUPERVISOR SOT23-5 Specifications: Output: Push-Pull, Totem Pole ; Reset: Active High ; Package / Case: SC-74A, SOT-753 ; Packaging: Tape & Reel (TR) ; Number of Voltages Monitored: 1 ; Reset Timeout: 40 ms Minimum ; Type: Simple Reset/Power-On Reset ; Voltage - Threshold: 3.4V ; Operating Temperature: -40°C ~ 85°

Same catergory

CA0741T : 0.9mhz Single And Dual, High Gain Operational Amplifiers For Military, Industrial And Commercial Applications.

CMV7106 : Single. Low Power, Low Voltage Operational Amplifier With Rrio, SOT23-6.

HA17082 : J-FET Input Operational Amplifiers. Since J-FET input operational amplifiers are formed from a pair of J-FET transistors, they provide superlative characteristics, including a high input impedance and a low input bias current. Thus they can be used in a wide range of applications, from general-purpose control equipment to medical applications. In particular, they are optimal for processing.

HYB3164165T : 4m X 16-bit Dynamic RAM. 194 304 words by 16-bit organization 70 °C operating temperature Fast access and cycle time RAS access time: ns (-50 version) ns (-60 version) Cycle time: ns (-50 version) ns (-60 version) CAS access time: ( -50 version) ( -60 version) Hyper page mode (EDO) cycle time ns (-50 version) ns (-60 version) Single V 0.3V) power supply Low power dissipation.

INA327EA/250 : ti INA327, Precision, Low Drift, CMOS Instrumentation Amplifier With Shutdown.

LM6152 : LM6152 - Dual And Quad 75 MHZ GBW Rail-to-rail I/o Operational Amplifiers, Package: Soic Narrow, Pin Nb=8.

M51943A : Power. Secam System Chroma Signal Processor.

MAX2632EUK-T : VHF-to-microwave, +3v, General-purpose Amplifiers. The MAX2630/MAX2631/MAX2632/MAX2633 are lowvoltage, low-noise amplifiers for use from VHF to microwave frequencies. Operating from a single to +5.5V supply, these devices have a flat gain response to 900MHz. Their low noise figure and low supply current make them ideal for receive, buffer, and transmit IF applications. The MAX2630/MAX2631 are biased.

MC74LVX8053 : Analog Multiplexer/demultiplexer. The MC74LVX8053 utilizes silicon­gate CMOS technology to achieve fast propagation delays, low ON resistances, and low OFF leakage currents. This analog multiplexer/demultiplexer controls analog voltages that may vary across the complete power supply range (from VCC to GND). The LVX8053 is similar in pinout to the high­speed HC4053A, and the metal­gate.

OPA640U : ti OPA640, Wideband Voltage Feedback Operational Amplifier. q UNITY-GAIN BANDWIDTH: 1.3GHz q UNITY-GAIN STABLE q LOW NOISE: 2.9nV/Hz q LOW HARMONICS: 10MHz q HIGH COMMON MODE REJECTION: 85dB q HIGH SLEW RATE: 350V/µs APPLICATIONS q COMMUNICATIONS q MEDICAL IMAGING q TEST EQUIPMENT q CCD IMAGING q ADC/DAC GAIN AMPLIFIER q HIGH-RESOLUTION VIDEO q LOW NOISE PREAMPLIFIER q DIFFERENTIAL AMPLIFIER q ACTIVE FILTERS.

PI5A3157 : Sotiny Single SPDT Mux/demux Switch. SOTINYTM Low Voltage SPDT Analog Switch 2:1 Mux/Demux Bus Switch CMOS Technology for Bus and Analog Applications SOTINY Package Technology: 6-pin, Thin Dual Flat in Line (TDFN) package, SC70 Package Low ON Resistance: 8 ohms at 3.0V Wide VCC Range: to 5.5V Rail-to-Rail Signal Range Control Input Overvoltage Tolerance: 5.5V min. Fast Transition Speed:.

RH108A : Operational Amplifier. The is a precision operational amplifier particularly well-suited for high source impedance applications requiring low offset and bias currents and low power consumption. The wafer lots are processed to Linear Technology's inhouse Class S flow to yield circuits usable in stringent military applications. For complete electrical s, performance curves.

TDA4680 : Video Processor With Automatic Cut-off And White Level Control. TDA4680 Video processor with automatic cut-off and white level control Product Supersedes data of April 1993 File under Integrated Circuits, IC02 1996 Oct 25 Video processor with automatic cut-off and white level control Operates from V DC supply Black level clamping of the colour difference, luminance and RGB input signals with coupling-capacitor DC level.

UTCLM318 : = Precision High-speed Operational Amplifier(15MHZ op AMP) ;; Package = DIP-8, SOP-8 ;;.

ISL84762 : Ultra Low ON-Resistance, Low Voltage, Single Supply, Dual SPDT Analog Switch The Intersil ISL84762 device is a low ON-resistance, low voltage, bidirectional, dual single-pole/double-throw (SPDT) analog switch designed to operate from a single +1.65V to +3.6V supply. Targeted applications include battery powered equipment that benefit from low RON (0.35Ů).

AD8118 : The AD8118 is a high speed 32 × 32 video crosspoint switch matrix. It offers a 500 MHz bandwidth and slew rate of 1800 V/µs for high resolution computer graphics (RGB) signal switching. With -75 dB of crosstalk and -100 dB isolation (@ 5 MHz), the AD8118 is useful in many high-speed applications. The 0.1 dB flatness out to 100 MHz makes the AD8118 ideal.

 
0-C     D-L     M-R     S-Z