Details, datasheet, quote on part number: LTV827V
PartLTV827V
Category
DescriptionHigh Density Mounting Type Photocoupler
CompanyLite-On Technology Corporation
DatasheetDownload LTV827V datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Features

Current transfer ratio (CTR : MIN. IF=5mA, VCE=5V) High input-output isolation voltage: (VISO : 5,000Vrms) Compact dual-in-line package : 1-channel type : 2-channel type : 4-channel type UL approved (No. E113898) TUV approved (No. R9653630) CSA approved (No. CA91533-1) FIMKO approved (No. 202634) NEMKO approved (No. P98101945) DEMKO approved (No. 307857) SEMKO approved (No. 9832157/01-03) VDE approved (No. 094722) Options available : -Leads with 0.4"(10.16mm)spacing (M Type) -Leads bends for surface mounting(S Type) -Tape and Reel of Type I for SMD(Add"-TA"Suffix) -Tape and Reel of Type II for SMD(Add"-TA1"Suffix) -VDE 0884 approvals (Add"-V"Suffix)

Applications

Computer terminals. System appliances, measuring instruments. Registers, copiers, automatic vending machines. Electric home appliances such as fan heaters, etc. Signal transmission between circuits of different potentials and impedances.

Note: 1.Year date code. 2. 2-digit work week. 3. Factory code shall be marked (Z : Taiwan, Y : Thailand). 4.Rank shall be or shall not be marked. 5. All dimensions are in millimeters (inches). (.010 ) unless otherwise noted. 6. Tolerance is 7. Specifications are subject to change without notice.

LTV847S-V 4-pin DIP 4-pin (leads with 0.4" spacing) 4-pin (lead bends for surface mount) 4-pin (tape and reel packaging of type 4-pin (tape and reel packaging of type 8-pin DIP 8-pin (leads with 0.4" spacing) 8-pin (lead bends for surface mount) 8-pin (tape and reel packaging of type 8-pin (tape and reel packaging of type 16-pin DIP 16-pin (leads with 0.4" spacing) 16-pin (lead bends for surface mount) 4-pin DIP 4-pin (leads with 0.4" spacing) 4-pin (lead bends for surface mount) 4-pin (tape and reel packaging of type 4-pin (tape and reel packaging of type 8-pin DIP 8-pin (leads with 0.4" spacing) 8-pin (lead bends for surface mount) 8-pin (tape and reel packaging of type 8-pin (tape and reel packaging of type 16-pin DIP 16-pin (leads with 0.4" spacing) 16-pin (lead bends for surface mount) UL approved TUV approved CSA approved FIMKO approved NEMKO approved SEMKO approved DEMKO approved

Forward Current Input Reverse Voltage Power Dissipation Collector-Emitter Voltage Output Emitter-Collector Voltage Collector Current Collector Power Dissipation Total Power Dissipation Operating Temperature Storage Temperature *1.Isolation Voltage *2.Soldering Temperature

*1. AC for 1 minute, R.H. Isolation voltage shall be measured using the following method. (1)Short between anode and cathode on the primary side and between collector, emitter and base on the secondary side. (2)The isolation voltage tester with zero-cross circuit shall be used. (3)The waveform of applied volttage shall be a sine wave. *2. For 10 seconds.

Forward Voltage Reverse Current Terminal Capacitance Collector Dark Current Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage *Current Transfer Ratio Collector Current Collector-emitter Saturation Voltage Isolation Resistance Floating Capacitance Cut-off Frequency Response Time (Rise) Response Time (Fall)

Supplement Rank Table of Current Transfer Ratio CTR

 

Related products with the same datasheet
LTV817STA
LTV817STA1
LTV817SV
LTV817V
LTV827MV
LTV827SV
LTV847MV
LTV847SV
LTV847V
Some Part number from the same manufacture Lite-On Technology Corporation
LTV829 High Density Mounting Type Photocoupler
LTV844
LTV845
LTV846
LTV847
LTV847MV
LTV847S
LTV847SV
LTV849
LTV849M
MBR10100 100V, 10A Schottky Barrier Rectifier
MBR10100CT
MBR1030 30V, 10A Schottky Barrier Rectifier
MBR1030CT
MBR1035 35V, 10A Schottky Barrier Rectifier
MBR1035CT
MBR1040 40V, 10A Schottky Barrier Rectifier
MBR1040CT
MBR1045 45V, 10A Schottky Barrier Rectifier
MBR1045CT
MBR1050 50V, 10A Schottky Barrier Rectifier

PR3001 : 50V, 3.0A Fast Recovery Rectifier

LTV4N25S-V : General Purpose TYPE Photocoupler

LTE-2871 : Gaalas T-1 3/4 Modified Infrared Emitting Diode

LTL-709Y : Standard LED - Through Hole Yellow Diffused » » » LEDs - High Brightness - Leaded - Yellow LEDs - High Brightness - Leaded - Yellow Standard Leaded LED components are often used in indication applications and generally have power levels Specifications: Manufacturer: Lite-On ; Product Category: Standard LED - Through

LTS-4801JD : LED Displays & Accessories 1-DIG Red CARHD Specifications: Manufacturer: Lite-On ; Product Category: LED Displays & Accessories ; RoHS:  Details ; Display Type: 7 Segment ; Number of Digits: 1 ; Character Size: 0.39 in ; Illumination Color: Red ; Wavelength: 650 nm ; Common Pin: Common Anode ; Operating Voltage: 2.6 V ; Operating Curren

LTST-C190KRKT : LEDs -; LED SUPER RED CLEAR 0603 SMD Specifications: Color: Red ; Lens Style/Size: Rectangle with Flat Top, 1.06mm x 0.8mm ; Millicandela Rating: 54mcd ; Voltage - Forward (Vf) Typ: 2V ; Wavelength - Dominant: 631nm ; Wavelength - Peak: 639nm ; Current - Test: 20mA ; Viewing Angle: 130 ; Lens Type: Clear ; Luminous Flux @ Current - Te

FU1DA : 1 A, 200 V, SILICON, SIGNAL DIODE, DO-221AC Specifications: Package: GREEN PACKAGE-2 ; Number of Diodes: 1 ; IF: 1000 mA ; RoHS Compliant: RoHS

T8M50T400B : 600 V, 8 A, 4 QUADRANT LOGIC LEVEL TRIAC, TO-220AB Specifications: Thyristor Type: Triac, 4 QUADRANT LOGIC LEVEL TRIAC ; Package Type: PLASTIC PACKAGE-3 ; Pin Count: 3 ; VDRM: 600 volts ; IT(RMS): 8 amps ; Standards and Certifications: RoHS

 
0-C     D-L     M-R     S-Z