Details, datasheet, quote on part number: IDT54FCT640ATQB
PartIDT54FCT640ATQB
CategoryInterface and Interconnect
DescriptionFast CMOS Octal Bidirectional Transceivers
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT54FCT640ATQB datasheet
Quote
Find where to buy
 
  

 

Features, Applications

IDT54/74FCT245/640/645 equivalent to FASTTM speed and drive IDT54/74FCT245A/640A/645A 25% faster than FAST IDT54/74FCT245C/640C/645C 40% faster than FAST TTL input and output level compatible CMOS output level compatible IOL = 64mA (commercial) and 48mA (military) Input current levels only 5A max. CMOS power levels (2.5mW typical static) Direction control and over-riding 3-state control Product available in Radiation Tolerant and Radiation Enhanced versions Military product compliant to MIL-STD-883, Class B and DESC listed Meets or exceeds JEDEC Standard 18 specifications

The IDT octal bidirectional transceivers are built using an advanced dual metal CMOS technology. The 74FCT245/A/C, IDT54/74FCT640/A/C and IDT54/74FCT645/ A/C are designed for asynchronous two-way communication between data buses. The transmit/receive (T/R) input determines the direction of data flow through the bidirectional transceiver. Transmit (active HIGH) enables data from A ports to B ports, and receive (active LOW) from B ports to A ports. The output enable (OE) input, when HIGH, disables both A and B ports by placing them in High-Z condition. The IDT54/74FCT245/A/C and IDT54/74FCT645/A/C transceivers have non-inverting outputs. The IDT54/ 74FCT640/A/C has inverting outputs.

The IDT logo is a registered trademark of Integrated Device Technology, Inc. FAST is a registered trademark of National Semiconductor Co.

Pin Names Description Output Enable Input (Active LOW) Transmit/Receive Input Side A Inputs or 3-State Outputs Side B Inputs or 3-State Outputs

NOTES: 640 is inverting from input to output. H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care

Symbol Rating VTERM(2) Terminal Voltage with Respect to GND VTERM(3) Terminal Voltage with Respect to GND TA Operating Temperature TBIAS Temperature Under Bias TSTG Storage Temperature PT Power Dissipation DC Output Current IOUT Commercial to +7.0 Military Unit +7.0 V

Symbol CIN CI/O Parameter(1) Input Capacitance I/O Capacitance Conditions VIN = 0V VOUT = 0V Typ. Max. Unit pF

NOTE: 2534 1. This parameter is measured at characterization but not tested.

NOTES: 2534 tbl 01 Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. No terminal voltage may exceed VCC by +0.5V unless otherwise noted. 2. Inputs and VCC terminals. 3. Outputs and I/O terminals.

Following Conditions Apply Unless Otherwise Specified: VLC = 0.2V; VHC = VCC 0.2V Commercial: to +70C, VCC 5%; Military: to +125C, VCC 10%

Symbol VIH VIL IIH IIL IIH IIL VIK IOS VOH Parameter Input HIGH Level Input LOW Level Input HIGH Current (Except I/O pins) Input LOW Current (Except I/O pins) Input HIGH Current (I/O pins only) Input LOW Current (I/O pins only) Clamp Diode Voltage Short Circuit Current Output HIGH Voltage VCC = Min., = 18mA VCC = Max. VO = GND VCC = 3V, VIN = VLC or VHC, IOH = 32A VCC = Min. VIN = VIH or VIL VOL Output LOW Voltage (Port A and Port B) IOH = 300A IOH = 12mA MIL. IOH = 15mA COM'L. VCC = 3V, VIN = VLC or VHC, IOL = 300A VCC = Min. VIN = VIH or VIL IOL = 300A IOL = 48mA MIL. IOL = 64mA COM'L.

Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max VI = VCC VI = GND VI = VCC VI = GND

NOTES: 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC 5.0V, +25C ambient and maximum loading. 3. Not more than one output should be shorted at one time. Duration of the short circuit test should not exceed one second. 4. This parameter is guaranteed but not tested.


 

Related products with the same datasheet
IDT54FCT640A
IDT54FCT640AD
IDT54FCT640ADB
IDT54FCT640AE
IDT54FCT640AEB
IDT54FCT640AL
IDT54FCT640ALB
IDT54FCT640AP
IDT54FCT640APB
IDT54FCT640ASO
IDT54FCT640ASOB
IDT54FCT640AT
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT54FCT640ATSO Fast CMOS Octal Bidirectional Transceivers
IDT54FCT645

IDT54FCT823CTP : High-performance CMOS Bus Interface Registers

IDT7133LA35F : Multi-Ports 2K X 16 Dual-port RAM

IDT74FCT162H272ETPV : CMOS/BiCMOS->FCT/FCT-T Family Fast CMOS 12-bit Synchronous Bus Exchanger

IDT74FCT22245CTEB : Fast CMOS Octal Bidirectional Transceivers

IDT74FCT574CTQB : Octal Latched Transceiver

IDT72V215L10PFI : 3.3 VOLT HIGH Density CMOS Supersync FIFO 131,072 x 18 262,144 x 18

IDT8102-25VPCNVG : Clock/timing - Programmable Timer And Oscillator Integrated Circuit (ics) Clock Oscillator 1.8 V ~ 3.3 V; IC OSC CMOS 25MHZ 4VFQFN Specifications: Type: Clock Oscillator ; Frequency: 25MHz ; Count: - ; Voltage - Supply: 1.8 V ~ 3.3 V ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ICS84325AMT : 375 MHz, OTHER CLOCK GENERATOR, PDSO16 Specifications: Device Type: Clock Generator ; Package Type: Surface Mount, TSSOP, 4.40 X 5 MM, 0.92 MM HEIGHT, MO-153, TSSOP-16 ; Supply Voltage: 2.38 to 2.62 volts ; Frequency: 25 MHz ; Operating Temperature: 0.0 to 70 C (32 to 158 F)

ICS844003AGT : 226.66 MHz, OTHER CLOCK GENERATOR, PDSO8 Specifications: Device Type: Clock Generator ; Package Type: Surface Mount, TSSOP, 4.40 X 3 MM, 0.925 MM HEIGHT, MO-153, TSSOP-8 ; Supply Voltage: 2.38 to 2.62 volts ; Frequency: 28.3 MHz ; Operating Temperature: 0.0 to 70 C (32 to 158 F)

IDT5T2010NLGI : 5T SERIES, PLL BASED CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PBGA144 Specifications: Device Type: Clock Driver ; Package Type: Surface Mount, PLASTIC, BGA-144 ; Supply Voltage: 2.3 to 2.7 volts ; Skew: 100 ps ; Frequency: 250 MHz ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Features / Standards: RoHS, Lead-Free

SF0434BA02617S : 1 FUNCTIONS, 433.92 MHz, SAW FILTER Specifications: Filter Design: Saw Filter ; Insertion Loss: 3.7 dB ; Package Type: Surface Mount ; Operating Temperature: 14 to 140 F (263 to 333 K)

 
0-C     D-L     M-R     S-Z