Details, datasheet, quote on part number: IDT54FCT623AT
PartIDT54FCT623AT
CategoryLogic => Bus Transceivers
DescriptionFast CMOS Octal Bus Transceivers ( 3-state )
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT54FCT623AT datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Std., A and C speed grades Low input and output leakage 1A (max.) CMOS power levels True TTL input and output compatibility VOH = 3.3V (typ.) VOL = 0.3V (typ.) High drive outputs (-15mA IOH, 64mA IOL) Power off disable outputs permit "live insertion" Meets or exceeds JEDEC standard 18 specifications Product available in Radiation Tolerant and Radiation Enhanced versions Military product compliant to MIL-STD-883, Class B and DESC listed (dual marked) Available in DIP, SOIC, CERPACK and LCC packages

DESCRIPTION

The is a non-inverting octal transceiver with 3-state bus-driving outputs in both the send and receive directions. The B bus outputs are capable of sinking 64mA and sourcing to 15mA, providing very good capacitive drive characteristics. These octal bus transceivers are designed for asynchronous two-way communication between data buses. The control function implementation allows for maximum flexibility in timing. One important feature of the FCT623T/AT/CT is the Power Down Disable capability. When the GAB and GBA inputs are conditioned to put the device in high-Z state, the I/O ports will maintain high impedance during power supply ramps and when VCC = 0V. This is a desirable feature in back-plane applications where it may be necessary to perform "live" insertion and removal of cards for on-line maintenance. It is also a benefit in systems with multiple redundancy where one or more redundant cards may be powered-off.

The IDT logo is a registered trademark of Integrated Device Technology, Inc.

Pin Names GBA, GAB - B8 Description Enable Inputs A Bus Inputs or 3-State Outputs B Bus Inputs or 3-State Outputs

Symbol Rating Commercial VTERM(2) Terminal Voltage to +7.0 with Respect to GND VTERM(3) Terminal Voltage 0.5 to with Respect to VCC +0.5 GND TA Operating to +70 Temperature TBIAS Temperature to +125 Under Bias TSTG Storage to +125 Temperature PT Power Dissipation 0.5 I OUT DC Output Current to +120 Military to +7.0 Unit V

Enable Inputs GAB Outputs B data to A bus A data to B bus Z B data to A bus A data to B bus
NOTES: H = HIGH Voltage Level L = LOW Volage Level Z = High-Impedance (OFF) state

2563 lnk 03 NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. No terminal voltage may exceed VCC by +0.5V unless otherwise noted. 2. Input and VCC terminals only. 3. Outputs and I/O terminals only.

Symbol Parameter(1) CIN Input Capacitance COUT Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 6 8 Max. Unit pF 12

2563 lnk 04 NOTE: 1. This parameter is measured at characterization but not tested.

Following Conditions Apply Unless Otherwise Specified: Commercial: 5%; Military: to +125C, VCC 10%

Symbol VIH VIL L II VIK IOS VOH Parameter Input HIGH Level Input LOW Level Input HIGH Input HIGH Current (5) Current (5) Input LOW Current (5) Clamp Diode Voltage Short Circuit Current Output HIGH Voltage (A and B Bus) Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max., = 2.7V VCC = Max., = 0.5V VCC = Max., VI = VCC (Max.) VCC = Min., = 18mA VCC VO = GND IOH = 6mA MIL. IOH = 8mA COM'L. IOH = 12mA MIL. IOH = 15mA COM'L. VCC = Min. IOL = 32mA MIL. (4) VIN = VIH or VIL IOL = 48mA COM'L. VCC = Min. IOL = 48mA MIL. (4) VIN = VIH or VIL IOL = 64mA COM'L. VCC = 0V, VIN VO 4.5V

Output LOW Voltage (A Bus) Output LOW Voltage (B Bus) Input/Output Power Off Leakage(6) Input Hysteresis Quiescent Power Supply Current

NOTES: 2563 tbl 05 1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC 5.0V, +25C ambient. 3. Not more than one output should be shorted at one time. Duration of the short circuit test should not exceed one second. 4. These are maximum IOL values per output, for 8 outputs turned on simultaneously. Total maximum IOL (all outputs) is 512mA for commercial and 384mA for military. Derate IOL for number of outputs exceeding 8 turned on simultaneously. 5. The test limit for this parameter 55C. 6. This parameter is guaranteed but not tested.


 

Related products with the same datasheet
IDT54FCT623ATD
IDT54FCT623ATDB
IDT54FCT623ATE
IDT54FCT623ATEB
IDT54FCT623ATL
IDT54FCT623ATLB
IDT54FCT623ATP
IDT54FCT623ATPB
IDT54FCT623ATSO
IDT54FCT623ATSOB
IDT54FCT623CT
IDT54FCT623CTD
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT54FCT623ATD Fast CMOS Octal Bus Transceivers ( 3-state )
IDT54FCT640 Fast CMOS Octal Bidirectional Transceivers

IDT70V9349L9BF : High-speed 3.3V 64K X18/x16 Synchronous Pipelined Dual-port Static RAM

IDT74LVCH16260APA : 3.3V CMOS Octal BUS Transceiver WITH 3-state Outputs AND 5 VOLT Tolerant I/O

IDT71V3559SA80PF : 128K X 36, 256K X 18 3.3V Synchronous Srams 3.3V I/O, Flow-through Outputs Burst Counter, Single Cycle Deselect

IDT71V65802133BGI : 256K X 36 ZBT SRAM, 5 ns, PBGA119 Specifications: Memory Category: SRAM Chip ; Density: 9437 kbits ; Number of Words: 256 k ; Bits per Word: 36 bits ; Package Type: BGA, 14 X 22 MM, MS-028AA, BGA-119 ; Pins: 119 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 5 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT7202LA20JG8 : 1K X 9 OTHER FIFO, 120 ns, PDSO28 Specifications: Memory Category: FIFO ; Density: 9 kbits ; Number of Words: 1 k ; Bits per Word: 9 bits ; Package Type: SOIC, 0.330 INCH, SOIC-28 ; Pins: 28 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 120 ns ; Cycle Time: 140 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDT7202LA20JI : 1K X 9 OTHER FIFO, 120 ns, PDSO28 Specifications: Memory Category: FIFO ; Density: 9 kbits ; Number of Words: 1 k ; Bits per Word: 9 bits ; Package Type: SOIC, 0.330 INCH, SOIC-28 ; Pins: 28 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 120 ns ; Cycle Time: 140 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

7008S25G : 64K X 8 DUAL-PORT SRAM, 25 ns, CPGA84 Specifications: Memory Category: SRAM Chip ; Density: 524 kbits ; Number of Words: 64 k ; Bits per Word: 8 bits ; Package Type: 1.120 X 1.120 INCH, 0.160 INCH HEIGHT, CERAMIC, PGA-84 ; Pins: 84 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 25 ns ; Operating Temperature: 0 to 70 C (32 to 1

7200L25J : 256 X 9 OTHER FIFO, 25 ns, PQCC32 Specifications: Memory Category: FIFO ; Density: 2 kbits ; Number of Words: 256 k ; Bits per Word: 9 bits ; Package Type: PLASTIC, LCC-32 ; Pins: 32 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 25 ns ; Cycle Time: 35 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

Same catergory

54AC158D : Quad 2-input Multiplexer. The is a high-speed quad 2-input multiplexer. It selects four bits of data from two sources using the common Select and Enable inputs. The four buffered outputs present the selected data in the inverted form. The 'AC/'ACT158 can also be used as a function generator. n Outputs source/sink n 'ACT158 has TTL-compatible inputs n Standard Microcircuit Drawing.

5962-9070301MEA : Multiplexers. ti CD54HCT158, High Speed CMOS Logic Quad 2-Input Multiplexers.

74AC11004DB : Hex Inverter. Flow-Through Architecture Optimizes PCB Layout Center-Pin VCC and GND Configuration Minimizes High-Speed Switching Noise EPIC TM (Enhanced-Performance Implanted CMOS) 1-m Process 500-mA Typical Latch-Up Immunity at 125C Package Options Include Plastic Small-Outline (DW) and Shrink Small-Outline (DB) Packages, and Standard Plastic 300-mil DIPs (N) FUNCTION.

74LVC162827A : 3.3V CMOS 20-BIT Buffer With 5V Tolerant I/o. Typical tSK(o) (Output Skew) < 250ps ESD > 2000V per MIL-STD-883, Method > 200V using machine model = 0) VCC 0.3V, Normal Range VCC to 3.6V, Extended Range CMOS power levels (0.4 W typ. static) All inputs, outputs, and I/O are 5V tolerant Supports hot insertion Available in SSOP, TSSOP, and TVSOP packages High Output Drivers: 12mA Reduced.

74LVX04 : LVX->HCMOS, 5V Input Tolerant->Low Voltage, Low No. Low Voltage CMOS Hex Inverter.

AVGDV74LS139N : Dual 1-4 Decoder/Demultiplexer, Plastic Dip, Through Hole.

CD74HCT125 : CMOS/BiCMOS->HC/HCT Family. High Speed CMOS Logic Quad Buffer, Three-state.

HCC4011BC1 : NAND Gates. QUAD 2 INPUT HCC/HCF 4011B DUAL 4 INPUT HCC/HCF 4012B TRIPLE 3 INPUT HCC/HCF 4023B PROPAGATION DELAY TIME = 60ns (typ.) = 50pF, VDD = 10V BUFFERED INPUTS AND OUTPUTS QUIESCENT CURRENT SPECIFIED TO 20V FOR HCC DEVICE INPUT CURRENT AT 18V AND 25C FOR HCC DEVICE 100% TESTED FOR QUIESCENT CURRENT 5V, 10V AND 15V PARAMETRIC RATINGS MEETS ALL REQUIREMENTS.

HD74HC490 : Dual 4-bit Decade Counters. Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips.

HD75173 : Line Receivers. Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips.

IN74AC257D : Quad 2-1 Data Selector/Multiplexer, Ninv (3-State) 16. The IN74AC257 is identical in pinout to the LS/ALS257, HC/HCT257. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALS outputs. This device selects a (4-bit) nibble from either the or B inputs as determined by the Select input. The nibble is presented at the outputs in noninverted from when.

MC100EP16FDR2 : 3.3V / 5V Ecl Differential Receiver/driver With Reduced Output Swing, Package: Soic, Pins=8.

MC54F132J : Quad 2-input NAND Schmitt Trigger Fast Shottky TTL. The MC54/74F132 contains four 2-input NAND gates which accept standard TTL input signals and provide standard TTL output levels. They are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. In addition, they have greater noise margin than conventional NAND gates. Each circuit contains a 2-input Schmitt.

QS32XV245 : 3.3V High-speed Double Width Bus Switch. QUICKSWITCH PRODUCTS 3.3V HIGH SPEED DOUBLEWIDTH BUS SWITCH 5 bidirectional switches connect inputs to outputs Pin compatibility with QS3245 250ps propagation delay Undershoot clamp diodes on all switch and control inputs LVTTL-compatible control inputs Available in 40-pin QVSOP package to 2.5V Voltage translation to 1.8V Voltage translation PCI bus isolation.

SN74ALS638ADW : Standard Transceivers. ti SN74ALS638A, Octal Bus Transceivers. Bidirectional Bus Transceivers in High-Density 20-Pin Packages Choice of True or Inverting Logic A-Bus Outputs Are Open Collector; B-Bus Outputs Are 3 State Package Options Include Plastic Small-Outline (DW) Packages and Standard Plastic (N) 300-mil DIPs DEVICE A OUTPUT Open collector Open collector B OUTPUT 3 state 3 state LOGIC Inverting True These.

SN74AS1032AD : ti SN74AS1032A, Quadruple 2-Input Positive-or Buffers/drivers. Driver Version of AS32 High Capacitive-Drive Capability Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic (J) 300-mil DIPs These devices contain four independent 2-input positive-OR buffers/drivers. They perform the Boolean functions B in positive logic. The SN54AS1032A is characterized.

SN74LV02D : ti SN74LV02, Quadruple 2-Input Positive-nOR GATE. EPIC TM (Enhanced-Performance Implanted CMOS) 2- Process Typical VOLP (Output Ground Bounce) V at VCC, = 25C Typical VOHV (Output VOH Undershoot) V at VCC, = 25C ESD Protection Exceeds 2000 V Per MIL-STD-883C, Method 3015; Exceeds 200 V Using Machine Model = 200 pF, = 0) Latch-Up Performance Exceeds 250 mA Per JEDEC Standard JESD-17 Package Options.

SY10/100EPT20V : . 3.3V and 5V power supply options 300ps typical propagation delay Differential LVPECL output ICC Max 20mA PNP LVTTL input for minimal loading Q output will default HIGH with inputs open High bandwidth to 800MHz typical Available in 8-pin MSOP and SOIC package The is a TTL/CMOS to differential PECL translator. Capable of running from or 5V supply, the part.

IDT74LVC06ADC8 : LVC/LCX/Z SERIES, HEX 1-INPUT INVERT GATE, PDSO14. s: Gate Type: NOT ; Supply Voltage: 3.3V ; Output Type: Open Drain ; Logic Family: CMOS ; Inputs: 1 ; Propagation Delay: 3.9 ns ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Pin Count: 14 ; IC Package Type: SOIC, Other, 1.27 MM PITCH, SOIC-14.

 
0-C     D-L     M-R     S-Z