Details, datasheet, quote on part number: IDT54FCT574DTQB
PartIDT54FCT574DTQB
CategoryLogic => Registers => CMOS/BiCMOS->FCT/FCT-T Family
TitleCMOS/BiCMOS->FCT/FCT-T Family
DescriptionFast CMOS Octal D Registers (3-state)
CompanyIntegrated Device Technology, Inc.
DatasheetDownload IDT54FCT574DTQB datasheet
  

 

Features, Applications

IDT54FCT574A equivalent to FASTTM speed and drive to 30% faster than FAST to 50% faster than FAST IOL = 48mA (commercial) and 32mA (military) CMOS power levels (1mW typ. static) Edge-triggered master/slave, D-type flip-flops Buffered common clock and buffered common 3-state control MIlitary product compliant to MIL-STD-883, Class B Meets or exceeds JEDEC Standard 18 specifications Available in the following packages: Commercial: SOIC Military: CERDIP, LCC

The an 8-bit register built using an advanced dual metal CMOS technology. These registers consist of eight D-type flip-flops with a buffered common clock and buffered 3-state output control. When the output enable (OE) is low, the eight outputs are enabled. When the OE input is high, the outputs are in the high-impedance state. Input data meeting the set-up and hold time requirements of the D inputs is transferred to the O outputs on the low-to-high transition of the clock input. The FCT574 has non-inverting outputs with respect to the data at the D inputs.

The IDT logo is a registered trademark of Integrated Device Technology, Inc.

Symbol VTERM(3) TA TBIAS TSTG PT IOUT Rating Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Operating Temperature under BIAS Storage Temperature Power Dissipation DC Output Current 0.5 to VCC 0.5 to VCC V Commercial to +7 Military to +7 Unit V

Pin Names Ox OE Description D flip-flop data inputs Clock Pulse for the register. Enters data on LOW-toHIGH transition. 3-State Outputs (TRUE) Active LOW 3-State Output Enable Input

Function High-Z Load Register OE Inputs H Dx Outputs Ox Internal Ox NC

NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. No terminal voltage may exceed Vcc by +0.5V unless otherwise noted. 2. Input and Vcc terminals only. 3. Output and I/O terminals only.

Symbol CIN COUT Parameter(1) Input Capacitance Output Capacitance Conditions VIN = 0V VOUT = 0V Typ. 6 8 Max. 10 12 Unit pF

NOTE: H = HIGH Voltage Level X = Don't Care L = LOW Voltage Level Z = High Impedance = No Change = LOW-to-HIGH transition

NOTE: 1. This parameter is measured at characterization but not tested.

Following Conditions Apply Unless Otherwise Specified: VLC = 0.2V; VHC = VCC - 0.2V Commercial: to +70C, VCC 5.0V 5%, Military: to +125C, VCC 5.0V 10%

Symbol VIH VIL IIH IIL IOZH IOZL VIK IOS VOH Off State (High Impedance) Output Current Clamp Diode Voltage Short Circuit Current Output HIGH Voltage VCC = Max. Parameter Input HIGH Level Input LOW Level Input HIGH Current VCC = Max. Input LOW Current Test Conditions(1) Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VI = VCC VI = GND VO = VCC VO = GND GND(3) Min. 2 60 VHC 0.7 120 VCC 4.3 GND 0.3 Max. VLC 0.5 A Unit V

VCC = Min., IIN = 18mA VCC = Max., VO = VCC = 3V, VIN = VLC or VHC, IOH = 32A VCC = Min IOH = 300A VIN = VIH or VIL IOH = 12mA MIL IOH = 15mA COM'L VCC = 3V, VIN = VLC or VHC, IOL = 300A VCC = Min IOL = 300A VIN = VIH or VIL IOL = 32mA MIL IOL = 48mA COM'L

NOTES: 1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at VCC 5.0V, +25C ambient and maximum loading. 3. Not more than one output should be tested at one time. Duration of the test should not exceed one second. 4. This parameter is guaranteed but not ttested.


 

Related products with the same datasheet
IDT54FCT574A
IDT54FCT574AD
IDT54FCT574ADB
IDT54FCT574AE
IDT54FCT574AEB
IDT54FCT574AL
IDT54FCT574ALB
IDT54FCT574AP
IDT54FCT574APB
IDT54FCT574ASO
IDT54FCT574ASOB
IDT54FCT574AT
Some Part number from the same manufacture Integrated Device Technology, Inc.
IDT54FCT574E Fast CMOS Octal D Registers (3-state)
IDT54FCT621 Fast CMOS Octal Bus Transceiver (open Drain)
IDT54FCT623AT Fast CMOS Octal Bus Transceivers ( 3-state )
IDT54FCT640 Fast CMOS Octal Bidirectional Transceivers

IDT7034S15 : Multi-Ports 4K X 18 Dual-port RAM

IDT7164S15PB : CMOS Static RAM 64k ( 8k X 8-bit )

IDT74FCT16270TPV : Fast CMOS 18-bit R/w Buffer

IDT49FCT804C : FCT SERIES, LOW SKEW CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PDSO20 Specifications: Device Type: Clock Driver ; Bus Interface: CMOS ; Package Type: Surface Mount, QSOP, QSOP-20 ; Supply Voltage: 4.5 to 5.5 volts ; Skew: 350 ps ; Operating Temperature: -40 to 85 C (-40 to 185 F)

IDT72V805L15PFI9 : 256 X 9 BI-DIRECTIONAL FIFO, 6.5 ns, PQFP64 Specifications: Memory Category: FIFO ; Density: 2 kbits ; Number of Words: 256 k ; Bits per Word: 9 bits ; Package Type: TQFP, PLASTIC, TQFP-64 ; Pins: 64 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 6.5 ns ; Cycle Time: 10 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

IDTCV137PV : 400 MHz, PROC SPECIFIC CLOCK GENERATOR, PDSO56 Specifications: Device Type: Clock Generator ; Package Type: Surface Mount, SSOP, SSOP-56 ; Supply Voltage: 3.14 to 3.46 volts ; Frequency: 14.32 MHz ; Operating Temperature: 0.0 to 70 C (32 to 158 F)

70V05L35G : 8K X 8 DUAL-PORT SRAM, 25 ns, CPGA68 Specifications: Memory Category: SRAM Chip ; Density: 66 kbits ; Number of Words: 8 k ; Bits per Word: 8 bits ; Package Type: 1.180 X 1.180 INCH, 0.160 INCH HEIGHT, CERAMIC, PGA-68 ; Pins: 68 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 25 ns ; Operating Temperature: 0 to 70 C (32 to 1

7142LA100JB : 2K X 8 DUAL-PORT SRAM, 100 ns, CDIP48 Specifications: Memory Category: SRAM Chip ; Density: 16 kbits ; Number of Words: 2 k ; Bits per Word: 8 bits ; Package Type: DIP, 0.620 X 2.430 INCH, 0.150 INCH HEIGHT, SIDE BRAZED, DIP-48 ; Pins: 48 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 100 ns ; Operating Temperature: 0 to 70 C

71V3577S85PF9 : 128K X 36 CACHE SRAM, 7.5 ns, PBGA119 Specifications: Memory Category: SRAM Chip ; Density: 4719 kbits ; Number of Words: 128 k ; Bits per Word: 36 bits ; Package Type: BGA, BGA-119 ; Pins: 119 ; Logic Family: CMOS ; Supply Voltage: 3.3V ; Access Time: 7.5 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

7205L25JI8 : 8K X 9 OTHER FIFO, 25 ns, PQCC32 Specifications: Memory Category: FIFO ; Density: 74 kbits ; Number of Words: 8 k ; Bits per Word: 9 bits ; Package Type: PLASTIC, LCC-32 ; Pins: 32 ; Logic Family: CMOS ; Supply Voltage: 5V ; Access Time: 25 ns ; Cycle Time: 35 ns ; Operating Temperature: 0 to 70 C (32 to 158 F)

87973DYILFT : 87973 SERIES, PLL BASED CLOCK DRIVER, 13 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), PQFP52 Specifications: Device Type: Clock Driver ; Package Type: Surface Mount, 10 X 10 MM, 1.40 MM HEIGHT, MS-026BCC, LQFP-52 ; Supply Voltage: 3.14 to 3.46 volts ; Skew: 550 ps ; Frequency: 125 MHz ; Operating Temperature: -40 to 85 C (-40 to 185 F)

 
0-C     D-L     M-R     S-Z