Details, datasheet, quote on part number: HY5DU12422T
Description512M(128Mx4) DDR Sdram
CompanyHynix Semiconductor
DatasheetDownload HY5DU12422T datasheet


Features, Applications

This document is a general product description and is subject to change without notice. Hynix semiconductor does not assume any responsibility for use of circuits described. No patent licenses are implied. Rev. 02 1

1. Rev 0.2 (Jul. 01) 1) Preliminary IDD Specification defined 2. Rev 0.3 (Feb. 02) 1) tHZ/tLZ Specification defined 2) IDD4W Specification changed from 200mA 3) tIS/tIH at DDR200 changed from 1.1ns 3. Rev 0.4 (Feb. 02) 1) tCK max DDR2666A/B, DDR2000 changed 12ns 2) tWR SPEC. at DDR200 changed 3) IDD0 SPEC. changed from at DDR266A/B and DDR200 4) tQHS at DDR200 changed from 0.75ns 4. Rev 0.5 (May. 02) 1) IDD SPEC. updated 2) Input leakage current changed from +/-2uA 5. Rev 0.6 (May. 02) 1) IDD SPEC.(IDD2Q, IDD7A) updated


The Hynix HY5DU12422(L)T, HY5DU12822(L)T and HY5DU121622(L)T are a 536,870,912-bit CMOS Double Data Rate(DDR) Synchronous DRAM, ideally suited for the main memory applications which requires large memory density and high bandwidth. The Hynix 512Mb DDR SDRAMs offer fully synchronous operations referenced to both rising and falling edges of the clock. While all addresses and control inputs are latched on the rising edges of the CK (falling edges of the /CK), Data, Data strobes and Write data masks inputs are sampled on both rising and falling edges of it. The data paths are internally pipelined and 2-bit prefetched to achieve very high bandwidth. All input and output voltage levels are compatible with SSTL_2.


VDD, VDDQ 2.5V 0.2V All inputs and outputs are compatible with SSTL_2 interface Fully differential clock inputs (CK, /CK) operation Double data rate interface Source synchronous - data transaction aligned to bidirectional data strobe (DQS) x16 device has two bytewide data strobes (UDQS, LDQS) per each x8 I/O Data outputs on DQS edges when read (edged DQ) Data inputs on DQS centers when write (centered DQ) On chip DLL align DQ and DQS transition with CK transition DM mask write data-in at the both rising and falling edges of the data strobe All addresses and control inputs except data, data strobes and data masks latched on the rising edges of the clock Programmable /CAS latency supported Programmable burst length with both sequential and interleave mode Internal four bank operations with single pulsed /RAS Auto refresh and self refresh supported tRAS lock out function supported 8192 refresh cycles / 64ms JEDEC standard 400mil 66pin TSOP-II with 0.65mm pin pitch Full and Half strength driver option controlled by EMRS

Standard Low Power Standard Low Power Standard Low Power
* X means speed grade JEDEC specification compliant


Related products with the same datasheet
Some Part number from the same manufacture Hynix Semiconductor
HY5DU12422T-H 512M(128Mx4) DDR Sdram
HY5DU12822LT 512M(64Mx8) DDR Sdram
HY5DU281622ALT 128M(8Mx16) DDR Sdram
HY5DU281622AT 128M(8Mx16) DDR Sdram
HY5DU281622DLT 128M(8Mx16) DDR Sdram
HY5DU281622DT 128M(8Mx16) DDR Sdram

GM71V65400C-6 :

GMS87C1408 : 800 Series->General Purpose 8-BIT Single-chip Microcontrollers

HYM71V32655BT8-S : ->Unbuffered DIMM

HYM72V64656T8-S : 64Mx64bits PC100 Sdram Unbuffered Dimm Based on 32Mx8 Sdram With Lvttl, 4 Banks & 8K Refresh

HYM76V4M655HGT6 : ->SO DIMM 4M X64 Bits P C 1 0 0 S D R a M S o D im Based on 4Mx16 Sdram With Lvttl, 4 Banks & 4K Refresh

HYM76V8M635HGLT6 : ->SO DIMM 8Mx64 Bits PC133 Sdram so Dimm Based on 4Mx16 Sdram With Lvttl, 4 Banks & 4K Refresh

HY5V26CSF-P : 4 Banks x 2M x 16bits Synchronous DRAM

HY27UF081G2M-VPEP : 1gbit (128mx8bit / 64mx16bit) NAND Flash Memory

Same catergory

CD4013BC : CMOS/BiCMOS->4000 Family. Dual D-type Flip-flop. The CD4013B dual D-type flip-flop is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement mode transistors. Each flip-flop has independent data, set, reset, and clock inputs and "Q" and "Q" outputs. These devices can be used for shift register applications, and by connecting "Q" output to the data input,.

HC0903P : Electro-magnetic Sound Generators. Applied Voltage 3V, 50% Duty Square Wave Measuring Distance : 10cm (all data taken at 25C unless otherwise specified) Model Rated Voltage (V) 1.5 3 Operating Voltage (V) HRated Current (mA) H Value Applying Rated Voltage, Rated Frequency, 50% Duty Square Wave .

SB230E : Schottky Barrier Rectifiers. Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound. Exceeds environmental standards of MIL-S-19500/228 For use in low voltage,high frequency inverters ,free wheeling , and polarity protection applications. Pb free product are available 99% Sn above can meet Rohs environment.

595D685X0016A8T : 6.8F Tantalum Capacitor 1507 (3718 Metric) 16V; CAP TANT 6.8UF 16V 20% 1507. s: Capacitance: 6.8F ; Voltage - Rated: 16V ; Tolerance: 20% ; : General Purpose ; Operating Temperature: -55C ~ 125C ; Lead Spacing: - ; ESR (Equivalent Series Resistance): 2.800 Ohm ; Lifetime @ Temp.: - ; Mounting Type: Surface Mount ; Type: Conformal Coated ; Package.

TSOP75433WTR : Infrared Receivers IR SENSOR IC 33KHZ. The Vishay Semiconductors TSOP75xxxW IR Receiver Modules for Remote Control Systems are miniature TSOP devices with two PIN diodes and a preamplifier assembled on a leadframe. The epoxy package is designed as an IR filter. With very low supply current, the Vishay IR Receiver Modules offer a demodulated output signal.

PM1008-R15K : Fixed Inductors, Coils, Choke 150nH 580mA 1008 (2520 Metric) Ceramic; INDUCTOR CHIP .15UH 10% SMD. s: Inductance: 150nH ; Tolerance: 10% ; Package / Case: 1008 (2520 Metric) ; Packaging: Tape & Reel (TR) ; Type: Ceramic ; Current: 580mA ; Mounting Type: Surface Mount ; Q @ Freq: 45 @ 100MHz ; Frequency - Self Resonant: 850MHz ; DC Resistance (DCR):.

MS3450L28-2PZ : Aluminum, Nickel Plated, Electroless Panel Mount, Flange Circular Connectors, Interconnect Receptacle, Male Pins; CONN RCPT 14POS WALL MNT W/PINS. s: Connector Type: Receptacle, Male Pins ; Shell Size - Insert: 28-2 ; Mounting Type: Panel Mount, Flange ; Fastening Type: Threaded ; : - ; Packaging: Bulk ; Number of Positions: 14 ; Termination: Crimp.

LTC1689CS#TR : Interface - Drivers, Receivers, Transceiver Integrated Circuit (ics) Driver Tape & Reel (TR) 3V, 5V; IC DVR 100MBPS QUAD RS485 16SOIC. s: Number of Drivers/Receivers: 4/0 ; Type: Driver ; Voltage - Supply: 3V, 5V ; Package / Case: 16-SOIC (0.154", 3.90mm Width) ; Packaging: Tape & Reel (TR) ; Protocol: RS485 ; Lead Free Status: Contains Lead.

BGM 681L11 E6327 : Rf Front End (lna + Pa) Rf/if And Rfid; IC GPS FRONT-END 3.6V TSLP11-1. s: RF Type: GPS ; Package / Case: 11-TSLP ; Frequency: 1575MHz ; : - ; Packaging: Cut Tape (CT) ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

8-1879279-2 : 121K Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 121K OHM 1/8W 0.1% 0805. s: Resistance (Ohms): 121K ; Power (Watts): 0.125W, 1/8W ; Tolerance: 0.1% ; Packaging: Bulk ; Composition: Thin Film ; Temperature Coefficient: 15ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

2-1879265-6 : 169K Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES 169K OHM 1/4W 0.1% 1206. s: Resistance (Ohms): 169K ; Power (Watts): 0.25W, 1/4W ; Tolerance: 0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 15ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

1614738-1 : 187K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 187K OHM 1/10W 0.5% 0805. s: Resistance (Ohms): 187K ; Power (Watts): 0.1W, 1/10W ; Tolerance: 0.5% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 50ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

RG1608N-1912-B-T1 : 19.1K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 19.1K OHM 1/10W .1% 0603. s: Resistance (Ohms): 19.1K ; Power (Watts): 0.1W, 1/10W ; Tolerance: 0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 10ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

D3DP10F : RF/MICROWAVE DIRECTIONAL COUPLER. s: RF Coupler Type: Uni-Directional.

0-C     D-L     M-R     S-Z