Details, datasheet, quote on part number: QMSERIESCONFIGURABLE
PartQMSERIESCONFIGURABLE
Category
TitleAC/DC CNVRTR CONFIG 1200-1500W
Description

TDK Lambda adds 700 W to 1200 W models to the QM series of modular AC-DC power supplies, featuring low acoustic noise and BF ready isolation. With both medical and industrial safety certifications, the series is ideal for a wide range of applications, including BF rated medical equipment, test and measurement, broadcast, communications, and renewable energy applications.



CompanyAmerica Semiconductor, LLC
DatasheetDownload QMSERIESCONFIGURABLE datasheet
  
QMSERIESCONFIGURABLE photo

 

Features, Applications
Features

Full Medical Isolation (MOPP) Low Speed, Low Audible Noise Fans to 16 Outputs Industry Leading Flexibility 7 Year Warranty Suitable for B and BF Rated Equipment PMBusTM Communication Option

Specifications

Model QM7 Input Voltage Range VAC 1200W output: 264VAC; 1500W output: - 264VAC Input Frequency Range 63Hz (440Hz with reduced PFC) Input Current (Max) / 11.8A Inrush Current at 25C and 264VAC (cold start) Touch Current A <100A (with 4 or fewer modules) (1) Power Factor Correction Meets > 0.95 with - 100% load Efficiency to 91%, configuration dependent Overcurrent Protection Hiccup/constant current style - Module dependent (1) Overvoltage Protection Latching. Output shut down, cycle AC to reset (1) Overtemperature Protection Converter: auto restart (fan off); Modules: individually protected Hold up time ms 1200W output: >20ms; 1500W output: >16ms Leakage Current (maximum) A L option: 300A; R option: (264VAC, 63Hz) Remote Sense Compensation Module dependent (1) AC Fail Signal Available with all Signal Option Types DC Good Signal Open collector, standard on all output modules Remote on/off Converter: Inhibit or Enable (Signal Option Type dependent). Modules: Inhibit. PMBusTM Interface Power supply on/off, fan speed/warning, temperature read back/warning, run time and manufacturing data Standby Output or 5V/2A (Standby Option Type dependent) Operating Temperature to +70C, derate linearly to 50% load from 70C; -40C start up. Storage Temperature to +70C (max 12 months) Humidity (Non condensing) %RH - 95%RH Cooling Two variable, low speed internal fans Audible Noise dBA QM7F: 43.6 dBA / 57.3 dBA @ 50C per BS ISO 3744:2010 Withstand Voltage Input to Output: 4kVAC (production tested (2 x MOPP), Input to Ground: (1 x MOPP), Output to Ground: (1 x MOPP), Output to Output: 200VDC Vibration Conforms IEC68-2-6, MIL-STD-810G, Method 514.6, Pro I Shock Conforms IEC68-2-27, IEC68-2-47, JIS C0041-1987, MIL-STD-810G, Method 516.6, Pro I, IV Safety Agency Certifications IEC/UL/CSA/EN UL 60950-1, IEC/UL/CSA/EN 60601-1, ANSI/AAMI & CE Mark. IEC/EN61010 included in 60950 report Altitude m 5,000m Emissions EN60601-1-2:2015 4th Edition, Class B radiated and conducted Immunity EN61000-6-2:2005, EN60601-1-2:2015 Size x 270mm Weight g See Installation Manual Warranty yrs Seven Years

(1) See website for detailed specifications The extensive range of output modules and options make it possible to achieve almost any combination of Volts and Amps. Create your own QM configuration online at https://config.emea.tdk-lambda.com/nv. This method checks your configuration and offers the optimum solution.

Module YF YC Voltage Range - 61.6V Current 25A 10.7A Power 1200W 600W Slots Used
Dual Output Modules (all single slot)

Maximum module power 200W (Total power from channel 1 + Channel 2) V2 Voltage V2 Range Current Power 4.2A 100W

Note: For DH module voltages below 10.8V(1) and 21.6V(2), a minimum load of 1W must be applied to channel 1.

Option Standby 1 Standby 2 Type Voltage Max Current Power VoltageMax Current Power 250mA 1.25W Not available 250mA 1.25W Not available 10W P5H Not available 2A 10W *see PMBusTM App Note PSU on/off Enable Inhibit *

The extensive range of output modules and options make it possible to achieve almost any combination of Volts and Amps. Create your own QM configuration online at https://config.emea.tdk-lambda.com/nv. This method checks your configuration and offers the optimum solution.

See Long Form datasheet output module specifications for Module Good, Module Inhibit, Remote Sense availability.


 

Some Part number from the same manufacture America Semiconductor, LLC
BLM31KN102SH1L
BLM31KN121SH1L
SOT-227 Announced today by America Semiconductor, LLC, a leading manufacturer of state-of-the-industry high-power semiconductors, today released SOT-227 standard power modules. Engineered for high frequency and pulse-load
R0K50563NS000BE

The RX63N and RX631 32-bit microcontrollers are capable of operating at up to 100 MHz. The built-in flash is capable of accessing with no wait, and at 100 MHz high-performance processing of 165 DMIPS

YRDKRX63N
R5F5631BDDBGU0
R5F5631BDDFCV0
R5F5631BDDFPV0
R5F5631EDDFCV0
R5F563NACDFBV0
R5F563NADDBGU0
R5F563NEDDBGU0
R5F563NEDDFBV0
R5F563NEDDFCV0
25RIA Announced today by America Semiconductor, LLC, a leading manufacturer of state-of-the-industry high-power semiconductors, is the 25RIA Series of medium power, phase control thyristors. The single-phase
PFE500SA28/T

TDK Corporation introduces the TDK-Lambda PFE-SA series of AC-DC full-brick power modules, representing a significant upgrade to the popular PFE-S series launched five years ago. These modules are particularly

DRB50121

TDK Corporation DRB series of DIN rail power supplies are for low-power applications and designed to support the growing trend for simple and economic DIN power solutions in industrial, building automation

DRB30241
PFE500SA48/T

TDK Corporation introduces the TDK-Lambda PFE-SA series of AC-DC full-brick power modules, representing a significant upgrade to the popular PFE-S series launched five years ago. These modules are particularly

DRB30121

TDK Corporation DRB series of DIN rail power supplies are for low-power applications and designed to support the growing trend for simple and economic DIN power solutions in industrial, building automation

DRB15241
 
0-C     D-L     M-R     S-Z