Details, datasheet, quote on part number: 10141585-001LF
Part10141585-001LF
Category
TitleStandard Card Edge Connectors EHPCE STMT 2UP6MP2UP20S
DescriptionAmphenol FCI eHPCE® (Enhanced High Power Card Edge) Connectors offer the same footprint as classic HPCE connectors but with several improvements. These enhanced connectors provide 50% more points of contact with 20% thicker contact material, delivering 15% more power density and a current rating of 42A per contact. The low-halogen, thermoplastic housing has better mechanical alignment and meets JEDEC standards, expanding the operating temperature to a range of -55°C to 105°C. The connectors' physical design provides lower resistance via GCS plating technology. Amphenol FCI eHPCE Connectors are ideal for industrial controls and instruments as well as equipment in the datacom, telecom, networking, and medical fields.

CompanyAmphenol FCI
DatasheetDownload 10141585-001LF datasheet
  
10141585-001LF photo

Others parts numbering
10137755-080224FLF: Power to the Board EHPCE STMT 8UP2MP24S W/O
10140903-2216E2LF: Power to the Board EHPCE VT STB 22MP16S WIT
10137482-001LF: Power to the Board EHPCE STMT 2UP6MP2UP20S
10137755-080224CLF Factory Special Order: Power to the Board EHPCE STMT 8UP2MP24S

 

Features, Applications
eHPCE® Enhanced High Power Card Edge Connector

eHPCE® connector offers a 15% increase in power density with the same footprint as classic HPCE®. The all-new power contact design offers lower contact resistance and higher current carrying capacity compared to classic HPCE® connectors. eHPCE® connectors are designed to extend the life of power supplies using card edge output power connectors.

§§Same mating footprint as classic HPCE® §§Enhanced housing design §§GCS® plated contacts deliver lower resistance without the

§§Maximum operating temperature increased to 105°C §§Low-halogen housing material
FEATURES
§§GCS® plating technology §§Current rating to 42A per contact at 30°C temperature

§§Provides lower resistance at a lower cost §§Higher performance with same mating footprint as classic

§§20% thicker contact material §§50% more points of contact §§Enhanced housing design §§Low-halogen housing §§Expanded temperature range to 105°C §§High temperature thermoplastic housing

§§Better mechanical alignment and increased robustness §§Meets JEDEC JS709 Electronic Industry Standard §§Supports higher continuous operating temperatures in

SPECIFICATIONS

Terminal: High Conductivity Copper Alloy Contact Area Power: GCS® plating over Nickel Signal: GXT® plating over Nickel

Durability: 200 mating cycles Mating Force: 10N per Ultra-power contact,
Operating Voltage: 250V (power), 30V (signal) Dielectric Withstanding Voltage: 1000V

Datacom/Networking Equipment Switches Telecom Industrial PCs Industrial Controls & Instruments Medical

Operating Temperature: to 105°C RoHS Information: this product is compatible

eHPCE vertical, press-fit, 16MP28S eHPCE® vertical, press-fit, 6MP12S eHPCE vertical, press-fit, 18MP24S

eHPCE vertical, press-fit, 18MP24S eHPCE® vertical, solder-to-board, 18MP24S
For more information, please contact: Marketing@fci.com or visit us at www.amphenol-icc.com
Disclaimer Please note that the above information is subject to change without notice.

 

Some Part number from the same manufacture Amphenol FCI
10137755-080224FLF Amphenol FCI eHPCE® (Enhanced High Power Card Edge) Connectors offer the same footprint as classic HPCE connectors but with several improvements. These enhanced connectors provide 50% more points
10140903-2216E2LF
10137482-001LF
10137755-080224CLF Factory Special Order
 
0-C     D-L     M-R     S-Z