Details, datasheet, quote on part number: LMV722QDGKRQ1
PartLMV722QDGKRQ1
CategorySemiconductors => Amplifiers => Operational Amplifiers (Op Amps) => General-Purpose Op Amps
Part familyLMV722-Q1 10-MHz Low-Noise Low-Voltage Low-Power Operational Amplifiers
TitleOperational Amplifiers - Op Amps 10-MHz Low-Noise Low-Voltage Low-Power Operational Amplifiers 8-VSSOP -40 to 125
Description10-MHz Low-Noise Low-Voltage Low-Power Operational Amplifiers 8-VSSOP -40 to 125
CompanyTexas Instruments Inc.
StatusACTIVE
ROHSY
SampleYes
DatasheetDownload LMV722QDGKRQ1 datasheet
Specifications 
Product CategoryOperational Amplifiers - Op Amps
ManufacturerTexas Instruments
Mounting StyleSMD/SMT
Package/CaseVSSOP-8
Supply Voltage - Max5.5 V
Output Current per Channel23.7 mA, 52.6 mA
Number of Channels2 Channel
GBP - Gain Bandwidth Product10 MHz
SR - Slew Rate4.9 V/us
CMRR - Common Mode Rejection Ratio64 dB to 88 dB
Ib - Input Bias Current260 nA
Vos - Input Offset Voltage3 mV
Supply Voltage - Min2.2 V
Operating Supply Current2.01 mA
Maximum Operating Temperature+ 125 C
Minimum Operating Temperature- 40 C
ShutdownNo Shutdown
SeriesLMV722-Q1
PackagingReel
3 dB Bandwidth-
Amplifier TypeLow Noise Operational Amplifier
BrandTexas Instruments
Development KitOPAMPEVM
en - Input Voltage Noise Density10.5 nV/sqrt Hz
In - Input Noise Current Density0.2 pA/sqrt Hz
Input TypeRail-to-Rail
Ios - Input Offset Current25 nA
Moisture SensitiveYes
Output TypeRail-to-Rail
ProductOperational Amplifiers
PSRR - Power Supply Rejection Ratio90 dB
Factory Pack Quantity2500
THD plus Noise0.001 %
Unit Weight20 mg
  Mecanical Data
Pin nbPackage typeInd stdJEDEC codePackage qtyCarrierDevice markWidth (mm)Length (mm)Thick (mm)Pitch (mm)
8DGKVSSOPR-PDSO-G2500LARGE T&RR6EQ 33.97.65

 

Features, Applications

The LMV722-Q1 device is a low-noise, low-voltage operational amplifier (op amp) that can be designed into a wide range of applications. The LMV722-Q1 has a unity-gain bandwidth of 10 MHz, slew rate of 5.25 V/s, and good voltage and current noise performance. The LMV722-Q1 is designed to provide optimal performance in low-voltage and low-noise systems such audio signal path or motor control applications. The device provides rail-to-rail output swing into heavy loads. The input common-mode voltage range includes ground and the maximum input offset voltage 3.5 mV (over recommended temperature range) for the device. The capacitive load capability is also good at low supply voltages. The operating range is from 5.5 V. Device Information(1)

PART NUMBER LMV722-Q1 PACKAGE VSSOP BODY SIZE (NOM) 4.90 mm

Qualified for Automotive Applications AEC-Q100 Qualified With the Following Results: Device Ambient Operating Temperature: +125C Device HBM ESD Classification Level 2 Device CDM ESD Classification Level C1 Power-Supply Voltage Range: 5.5 V Low Supply Current: 905 A/Amplifier 2.2 V High Unity-Gain Bandwidth: 10 MHz Rail-to-Rail Output Swing 600- Load: 120 mV From Either Rail 2-k Load: 50 mV From Either Rail 2.2 V Input Common-Mode Voltage Range Includes Ground Input Voltage Noise: 10.5 nV/Hz = 1 kHz

Infotainment Engine Control Unit Automotive Lighting Audio Signal Path
(1) For all available packages, see the orderable addendum at the end of the data sheet.

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA.

Features.................................................................. Applications........................................................... Description............................................................. Revision History..................................................... Pin Configuration and Functions......................... Specifications.........................................................

Absolute Maximum Ratings...................................... 4 ESD Ratings.............................................................. 4 Recommended Operating Conditions....................... 4 Thermal Information.................................................. 4 Electrical Characteristics VCC+ = 2.2 V..................... 5 Electrical Characteristics VCC+ = 5 V........................ 6 Typical Characteristics.............................................. 7

Documentation Support........................................ Receiving Notification of Documentation Updates Community Resources.......................................... Trademarks........................................................... Electrostatic Discharge Caution............................ Glossary................................................................

7.1 Overview................................................................. 12 7.2 Functional Block Diagram....................................... 12 7.3 Feature Description................................................. 12

DATE June 2017 REVISION * NOTES Initial release.
Submit Documentation Feedback Product Folder Links: LMV722-Q1

PIN NO. NAME 1IN 1IN+ VCC 2IN 2OUT VCC+ I/O Output of amplifier 1 Inverting input of amplifier 1 Non-inverting input of amplifier 1 Negative power supply Non-inverting input of amplifier 2 Inverting input of amplifier 2 Output of amplifier 2 Positive power supply DESCRIPTION


 

Some Part number from the same manufacture Texas Instruments Inc.
TLV7011DPWR Texas Instruments TLV7011/TLV7021 Low-Voltage Comparators are single-channel, micro-power comparators that feature low-voltage operation with rail-to-rail input capability. These comparators are available
TLV7021DPWR
PTLV7011DPWR Preliminary Release
TMP464AIRGTR Texas Instruments TMP464 Remote & Local Temperature Sensor is a high-accuracy, low-power temperature sensor using a two-wire, SMBus or I2C compatible interface. Up to four remote diode-connected temperature
TMP464AIRGTT
CSD22206W Texas Instruments CSD22206W P-Channel NexFET Power MOSFETs is a ?8V, 4.7m?, 1.5mm1.5mm device that is designed to deliver the lowest on-resistance and gate charge in the smallest package. The device provides
CSD22206WT
TUSB214EVM
TUSB214IRWBT
TUSB214RWBT
UCC27212AQDDARQ1 Texas Instruments UCC27212/UCC27212-Q1 High Frequency High-Side & Low-Side Driver offers extended operating range all the way down to 5V which helps lower power losses. The peak output pullup and pulldown
UCC27212DPRR
UCC27212DPRT
 
0-C     D-L     M-R     S-Z