Details, datasheet, quote on part number: AS5047D-ATSM
PartAS5047D-ATSM
Category
TitleIC ENCODER ROTARY 14TSSOP
Description
Companyams
DatasheetDownload AS5047D-ATSM datasheet
Quote
Find where to buy
 
  
AS5047D-ATSM photo

Others parts numbering
AS5047P-ATSM
AS5X47-TS_EK_SB: DEV KIT FOR AS5X47
AS5047P-TS_EK_AB: BOARD ADAPTER AS5047P
AS5047D-TS_EK_AB: SOCKET BOARD AS5047D
AS5X47D-TO_EK_ST: EVAL KIT FOR AS5X47D

 

Features, Applications

14-Bit On-Axis Magnetic Rotary Position Sensor with 11-Bit Decimal and Binary Incremental Pulse Count

The is a high-resolution rotary position sensor for fast absolute angle measurement over a full 360-degree range. This new position sensor is equipped with revolutionary integrated dynamic angle error compensation (DAECTM) with almost 0 latency and offers a robust design that suppresses the influence of any homogenous external stray magnetic field. A standard 4-wire SPI serial interface allows a host microcontroller to read 14-bit absolute angle position data from the AS5047D and to program non-volatile settings without a dedicated programmer. Incremental movements are indicated on a set of ABI signals with a maximum resolution of 2000 steps / 500 pulses per revolution in decimal mode and 2048 steps / 512 pulses per revolution in binary mode. The resolution of the ABI signal is programmable and can be reduced to 32 steps per revolution, or 8 pulses per revolution. Brushless DC (BLDC) motors are controlled through a standard UVW commutation interface with a programmable number of pole pairs from to 7. The absolute angle position is also provided as PWM-encoded output signal. The AS5047D is available as a single die in a compact 14-pin TSSOP package. Ordering Information and Content Guide appear at end of datasheet.

The benefits and features AS5047D, 14-Bit On-Axis Magnetic Rotary Position Sensor with 11-Bit Decimal and Binary Incremental Pulse Count are listed below: Figure 1: Added Value of Using the AS5047D

Easy to use saving costs on DSP Good resolution for motor and position control Simple optical encoder replacement No programmer needed (via SPI command)

Features

DAECTM Dynamic angle error compensation 14-bit core resolution ABI programmable decimal and binary pulse-count: ppr Zero position, configuration programmable

Versatile choice of the interface Lower system costs (no shielding)
Independent output interfaces: SPI, ABI, UVW, PWM Immune to external stray field
Applications

The AS5047D is ideally suited to support BLDC motor commutation for the most challenging industrial applications such as factory automation, building automation, robotics, PMSM (permanent magnet synchronous motor) and stepper motors closed loop regulation, as well as optical encoder replacement.

The functional blocks of this device are shown below: Figure 2: AS5047D Block Diagram
ABI Hall Sensors Analog Front-End Dynamic Angle Error Compensation
Digital input Digital input Digital output Digital input
Description

SPI chip select (active low) SPI clock SPI master data input, slave output SPI master data output, slave input Test pin (connect to ground)


 

Some Part number from the same manufacture ams
AS5047P-ATSM
AS5X47-TS_EK_SB
AS5047P-TS_EK_AB
AS5047D-TS_EK_AB
AS5X47D-TO_EK_ST
TCS34725FN

ams’ TCS34725 and TCS34727 are color light-to-digital converters that provide a digital return of  RGB, and clear light sensing values. An IR blocking filter, integrated on-chip and localized

TCS34727FN
TCS3472EVM
 
0-C     D-L     M-R     S-Z