Details, datasheet, quote on part number: B-L475E-IOT01A2
PartB-L475E-IOT01A2
Category
TitleSTM32 IOT DISCOVERY NODE (STM32L
Description

The high-connectivity STM32L4 IoT Discovery kit (B-L475E-IOT01A) from STMicroelectronics gives unrivalled flexibility for developers building IoT (Internet of Things) nodes by supporting multiple low-power wireless standards and Wi-Fi®, while integrating a complete collection of motion, gesture, and environmental sensors, unavailable on other kits in the market.



CompanyST Microelectronics, Inc.
DatasheetDownload B-L475E-IOT01A2 datasheet
  
B-L475E-IOT01A2 photo

Others parts numbering
STEVAL-IDB007V1M: EVAL PLATFORM SPBTLE-1S MODULE
B-L475E-IOT01A1
LPS22HBTR: MEMS NANO PRESSURE SENSOR: 260-1
VL53L0CXV0DH/1: SENSOR LASER DISTANCE TOF 2M
MP34DT01TR-M: MIC MEMS DIGITAL PDM OMNI 5HCLGA
HTS221TR: SENS HUMI/TEMP 2.5V I2C 4.5% SMD
VL6180XV0NR/1: MOD TIME-OF-FLIGHT 3IN1 12LGA
SPSGRF-915: RF TXRX MODULE ISM<1GHZ CHIP ANT
STEVAL-IDB007V1M: EVAL PLATFORM SPBTLE-1S MODULE
LIS3MDLTR: SENSOR MAGMTR I2C/SPI 12LGA
M24SR64-YMN6T/2: IC NFC/RFID TAG 64KB EEPROM 8SOI
LSM6DSLTR: IMU ACCEL/GYRO I2C/SPI 14LGA
STM32L475VGT6: IC MCU 32BIT 1MB FLASH 100LQFP

 

Features, Applications

Features

Ultra-low-power STM32L4 Series MCUs based on ARM® Cortex®-M4 core with 1 Mbyte of Flash memory and 128 Kbytes of SRAM, in LQFP100 package 64-Mbit Quad-SPI (Macronix) Flash memory Bluetooth® V4.1 module (SPBTLE-RF) Sub-GHz or 915 MHz) low-power-programmable RF module or SPSGRF-915) Wi-Fi® module Inventek ISM43362-M3G-L44 (802.11 b/g/n compliant) Dynamic NFC tag based on M24SR with its printed NFC antenna 2 digital omnidirectional microphones (MP34DT01) Capacitive digital sensor for relative humidity and temperature (HTS221) High-performance 3-axis magnetometer (LIS3MDL) 3D accelerometer and 3D gyroscope (LSM6DSL) 260-1260 hPa absolute digital output barometer (LPS22HB) Time-of-Flight and gesture-detection sensor (VL53L0X) 2 push-buttons (user and reset) USB OTG FS with Micro-AB connector Expansion connectors: ­ ArduinoTM Uno V3 ­ PMOD Flexible power-supply options: ­ ST LINK USB VBUS or external sources On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: mass storage, virtual COM port and debug port

Comprehensive free software HAL library including a variety of examples, as part of the STM32Cube package Support of a wide choice of Integrated Development Environments (IDEs) including IARTM, Keil®, GCC-based IDEs, ARM® mbed EnabledTM ARM® mbed EnabledTM(see http://mbed.org)

For further information contact your local STMicroelectronics sales office.
Description

The B-L475E-IOT01A Discovery kit for IoT node allows users to develop applications with direct connection to cloud servers. The Discovery kit enables a wide diversity of applications by exploiting low-power communication, multiway sensing and ARM® Cortex® -M4 core-based STM32L4 Series features. The support for Arduino Uno V3 and PMOD connectivity provides unlimited expansion capabilities with a large choice of specialized add-on boards.

Windows® OS (XP, 7, 8 and 10), Linux® or MacOSTM USB Type-A to Micro-B cable

Keil® MDK-ARM(a) IARTM EWARM(a) GCC-based IDEs including free SW4STM32 from AC6 ARM® mbed EnabledTM online

The demonstration software is preloaded in the STM32L475VG Flash memory for easy demonstration of the device peripherals in standalone mode. The latest versions of the demonstration source code and associated documentation can be downloaded from the www.st.com/x-cube-cloud webpage.

The VL53L0X contains a laser emitter and corresponding drive circuitry. The laser output is designed to remain within Class 1 laser safety limits under all reasonably foreseeable conditions including single faults, in compliance with IEC 60825-1:2014 (third edition). The laser output will remain within Class 1 limits as long as STMicroelectronics recommended device settings are used and the operating conditions, specified in the STM32L4 datasheets, are respected. The laser output power must not be increased by any means and no optics should be used with the intention of focusing the laser beam. Figure 1 shows the warning label for Class 1 laser products. Figure 1. Label for Class 1 laser products

To order the B-L475E-IOT01A Discovery kit for IoT node, depending on the frequency of the Sub-GHz module, refer to Table 1. Table 1. Ordering information

Date 27-Mar-2017 24-Apr-2017 Revision 2 3 Initial version. Updated Features and Description to add the PMOD connector. Added Section : Laser consideration to add Class 1 laser information. Changes


 

Some Part number from the same manufacture ST Microelectronics, Inc.
STEVAL-IDB007V1M

The high-connectivity STM32L4 IoT Discovery kit (B-L475E-IOT01A) from STMicroelectronics gives unrivalled flexibility for developers building IoT (Internet of Things) nodes by supporting multiple low-power

B-L475E-IOT01A1
LPS22HBTR
VL53L0CXV0DH/1
MP34DT01TR-M
HTS221TR
VL6180XV0NR/1
SPSGRF-915
STEVAL-IDB007V1M
LIS3MDLTR
M24SR64-YMN6T/2
LSM6DSLTR
STM32L475VGT6

M50FLW080AN : 8 Mbit (13 X 64KByte Blocks + 3 X 16 X 4KByte Sectors) 3V Supply Firmware Hub / Low Pin Count Flash Memorythe M50FLW080 is a 8 Mbit (1M X8) Non-volatilememory That CAN be Read, Erased And Reprogrammed.these Operations CAN be Performed Usinga Single Low Voltage (3.0 to 3.6V) S

PSD4135G1V-B-15M : Flash In-system-programmable Peripherals For 16-bit MCUs

PSD8134V70MT : Flash In-system Programmable Isp Peripherals For 8-bit MCUs

TL082AIP : General Purpose J-FET Dual Operational Amplifiers

VB029 : High Voltage Ignition Coil Driver Power I.c.

ZPSD412A1-C-70L : Low Cost Field Programmable Microcontroller Peripherals

SPDC400BT12M0.35 : Dc-dc step down Power Supply

ST62E08LM3/EPROM : 8-bit MCUs WITH A/D Converter, TWO Timers, Oscillator Safeguard & SAFE Reset

M24C16-RDW5TG : 2K X 8 I2C/2-WIRE SERIAL EEPROM, PDIP8 Specifications: Density: 16 kbits ; Number of Words: 2 k ; Bits per Word: 8 bits ; Bus Type: Serial ; Production Status: Full Production ; Data Rate: 0 MHz ; Supply Voltage: 5V ; Package Type: PLASTIC, DIP-8, DIP ; Pins: 8 ; Operating Range: AUTOMOTIVE ; Operating Temperature: -40 to 125 C (-40 to 2

ST72F361J4TCRS : 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PQFP64 Specifications: Life Cycle Stage: ACTIVE ; Clock Speed: 8 MHz ; ROM Type: Flash ; Supply Voltage: 4.5 to 5.5 volts ; I/O Ports: 50 ; Package Type: LFQP, Other, 10 X 10 MM, ROHS COMPLIANT, LQFP-64 ; Operating Range: Industrial ; Pin Count: 64 ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Feat

 
0-C     D-L     M-R     S-Z