Details, datasheet, quote on part number: P-NUCLEO-USB002
TitleDevelopment Boards & Kits - ARM USB Type-C and Power Delivery Nucleo Pack with NUCLEO-F072RB

STMicroelectronics P-NUCLEO-USB002 STM32 Nucleo Pack is designed for USB Type-C and Power Delivery specifications. The P-NUCLEO-USB002 uses X-CUBE-USB-PD certified software. This allows for fast USB PD application prototyping using ready-to-use ST componentry and software. The P-NUCLEO-USB002 kit uses the STM32F072 32-bit microcontroller based on ARM® Cortex®-M0 and two STUSB1602 USB Type-C port controllers. Developing applications that can manage up to two USB Type-C ports.

CompanyST Microelectronics, Inc.
DatasheetDownload P-NUCLEO-USB002 datasheet
Find where to buy
P-NUCLEO-USB002 photo

Others parts numbering
STUSB1602QTR: USB Interface IC


Features, Applications
USB Type-CTM and Power DeliveryTM Nucleo pack with NUCLEO-F072RB expansion board based on STUSB1602
USB type-CTM cable and connector spec. (rev 1.2) USB Power Delivery spec. (rev 2.0)

The STM32 Nucleo pack is designed for USB Type-CTM and Power Delivery specifications. Used with the embedded X-CUBE-USB-PD certified software, the P-NUCLEO-USB002 represents a development tool enabling fast prototyping of USB PD applications leveraging ready-to-use ST componentry and software. 32-bit ARM® Cortex®-M0-based microcontroller STM32F072RB with 128 kB Flash and 16 kB SRAM Dual ports solution based on Certified USB Type-CTM port controller STUSB1602, featuring: Type-C FSM with attach/detach and cable orientation detection USB PD PHY and BMC transceiver High voltage (20 V) technology VBUS voltage monitoring 600 mA VCONN power switch VBUS & VCONN discharge paths Dead-battery support V CC lines protection VBUS switch gate drivers Power connector to interface with external power supply (not included) USB 2.0 full speed data communication interface RoHS compliant


The P-NUCLEO-USB002 kit is designed to exploit the performance of the STM32F072 32-bit microcontroller based on ARM® Cortex®-M0 and two STUSB1602 USB Type-CTM port controllers, for developing applications that manage up to two USB Type-CTM ports. The is a Type-CTM controller designed with 20-V technology that integrates a fully-featured USB type-C state machine and a USB PD PHY + BMC driver. This analog front end features: Type-CTM attach and cable orientation detection; Source / Sink / DRP power role configuration; Integrated VCONN power switch; Integrated VBUS & VCONN discharge path; High voltage protection (including CC pins); VBUS switch gate drivers. The P-NUCLEO-USB002 is fully configurable and ready to support different power roles like provider, consumer or DRP. The X-CUBE-USB-PD is compliant with the USB Type-CTM 1.2 and USB Power Delivery 2.0 specifications.

For further information contact your local STMicroelectronics sales office

The USB Type-CTM and Power Delivery kit is composed of: 2. 3. The NUCLEO-F072RB development board that acts as the control board where the XCUBE-USB-PD software is running Power Delivery expansion board with two embedded STUSB1602 Type-CTM controllers A USB Type-C fully-featured and certified cable

Two DRP USB Type-CTM ports managed by two STUSB1602 Type-CTM port controllers Optional VBUS current sensing (and discrete voltage monitoring) Dedicated power connector to interface with an external power supply (not included in the kit) to provide different profiles as well as VCONN V) if necessary On-board power management able to supply internal voltages Six status LEDs for the USB-PD ports and a user LED USB 2.0 interface available on both Type-CTM ports RoHS compliant PCB type and size: material: FR4 four-layer copper thickness: 35 m total expansion board dimensions: 98 mm The USB 2.0 peripheral can be alternatively mapped on both ports or in passthrough configuration.

The Power Delivery expansion board is equipped with:

STM32F072RBT6 32-bit microcontroller based on the ARM Cortex-M0 with 128 kB Flash memory, kB of SRAM, USB 2.0 full speed data interface in LQFP64 package Two types of extension resources: Arduino Uno Revision 3 connectivity ST morpho extension pin headers for full access to all STM32 I/Os On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1 Flexible board power supply: USB VBUS on Type-B connector or external source Power management access point Three LEDs: USB communication (LD1), user LED (LD2) and power LED (LD3) Two push buttons: USER and RESET USB re-enumeration capability: three different interfaces supported on USB Virtual Com port (the NUCLEO-F072RB in the kit has a different solder bridge configuration to the standalone board) Mass storage Debug port Supported by a wide range of integrated development environments (IDEs), including IARTM, Keil® and GCC


Some Part number from the same manufacture ST Microelectronics, Inc.

STMicroelectronics P-NUCLEO-USB002 STM32 Nucleo Pack is designed for USB Type-C and Power Delivery specifications. The P-NUCLEO-USB002 uses X-CUBE-USB-PD certified software. This allows for fast USB PD application


STMicroelectronics Intelligent Wi-Fi modules are plug-and-play, standalone 802.11b/g/n solutions for easy wireless Internet connectivity integration. The modules are configured around a single-chip


JANKCA2N2484 : Semiconductor Device, Transistor, Npn, Silicon, Low-power Types 2n2484, 2n2484ua, 2n2484ub, Jan, Jantx, Jantxv, Jans, Janhc, And Jankc

NAND01GW3A0AN6E : NAND Flash Memorythe NAND Flash 528 Byte/ 264 Word Page is Afamily of Non-volatile Flash Memories That Usesnand Cell Technology. The Devices Range From128Mbits to 1Gbit And Operate With Either a 1.8Vor 3V Voltage Supply. The Size of a Page is Either528 Bytes (512

PSD913F2-B-70B81 : Flash In-system Programmable Isp Peripherals For 8-bit MCUs

PSD813F1AV-90UT : Flash In-system Programmable ISP Peripherals For 8-bit MCUs

L6566BTR : Multi-mode Controller for Smps

M25P40VMF3 : 512 Kbit to 32 Mbit, Low Voltage, Serial Flash Memory With 40 MHz or 50 MHz SPI Bus Interface

PM6675ATR : Pmic - Voltage Regulator - Linear + Switching Integrated Circuit (ics) Surface Mount Cut Tape (CT) Controller Controller; IC CTLR HE STPDN W/REG 24VFQFPN Specifications: Topology: Step-Down (Buck) (1), Linear (LDO) (1) ; Function: Any Function ; Number of Outputs: 2 ; Frequency - Switching: Down to 33kHz ; Voltage/Current - Output 1: Controller ; Voltage/Current - Output 2: 0.6 V ~ 2.5 V, 2A ; Voltage/Current - Output 3: - ; w/LED Driver: No ; w/Supe

M24C04-DW3G/G : 512 X 8 I2C/2-WIRE SERIAL EEPROM, PDIP8 Specifications: Density: 4 kbits ; Number of Words: 512 k ; Bits per Word: 8 bits ; Bus Type: Serial ; Production Status: Full Production ; Data Rate: 0 MHz ; Supply Voltage: 5V ; Package Type: PLASTIC, DIP-8, DIP ; Pins: 8 ; Operating Range: AUTOMOTIVE ; Operating Temperature: -40 to 125 C (-40 to

0-C     D-L     M-R     S-Z