|Title||LED RGB CLEAR 6SMD GW|
With the capability to provide full color illumination, RGB (red, green, blue) LEDs have become increasingly popular in various design applications ranging from indication to aesthetics. SunLED's commitment to provide engineers with infinite design possibilities through product selection flexibility is reflected in this ½ watt mid-power RGB SMD LED.
|Company||Sun LED Corporation|
|Datasheet||Download XZCB25MO24DG25X111S datasheet
|Others parts numbering|
|XZM2CRKM2DGFBB45SCCB: LED RGB CLEAR 4PLCC SMD|
|XZMDKCBDDG45S-9: LED RGB CLEAR 4SMD GW|
|XZFBBM2ACRDG92W-3: LED RGB CLEAR 6SMD|
|XZMDKDGCBD110W: LED RGB CLEAR 4SMD|
|XZBGRBBRMERK150W: LED RGB CLEAR 0404 SMD|
Ideal for indication light on hand held products Long life and robust package White SMD package, silicone resin. Standard Package: 500pcs/ Reel MSL (Moisture Sensitivity Level): 3 RoHS compliant.OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15[±0.006]unless otherwise noted. 3. Specifications are subject to change without notice.
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools.2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.
4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. 4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production.
5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of leadframe. Special care should be taken if an LED with silicone encapsulation to be used near such substances.
Part Number Emitting Color Emitting Material Lens-color Luminous Intensity (IF=150mA) cd min. Blue XZCB25MO24DG25X111S Red Green InGaN AlGaInP InGaN Water Clear 2.7* 4.2* typ. 4.29* 5.99* Luminous Flux ) lm min. 8.6* 12* typ. 10.7* 16.7* max. Viewing Angle 1/2 
Notes: 1/2 is the angle from optical centerline where the luminous intensity 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *LEDs are binned according to their luminous flux. * Luminous Intensity/Luminous Flux value is in accordance with CIE127-2007 standards.
Parameter Symbol Emitting Color Blue Power dissipation PD Red Green Blue Junction temperature TJ Red Green Blue Operating Temperature Top Red Green Blue Storage Temperature Tstg Red Green Blue DC Forward Current  IF Red Green Blue Peak Forward Current  IFM Red Green Blue Thermal resistance Rth j-a Red Green Blue Thermal resistance Rth j-s Red Green °C/W +85 °C Value °C W Unit
Notes: 1. Results from mounting on Aluminum Board. 2. 1/10 Duty Cycle, 0.1ms Pulse Width. 3. A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build up during assembly process (Reference JEDEC/ JESD625-A and JEDEC/J-STD-033)
|Some Part number from the same manufacture Sun LED Corporation|
With the capability to provide full color illumination, RGB (red, green, blue) LEDs have become increasingly popular in various design applications ranging from indication to aesthetics. SunLED's commitment