Details, datasheet, quote on part number: STEVAL-ILL088V1
PartSTEVAL-ILL088V1
Category
TitleLED Lighting Development Tools 0.55 A, positive buck-boost LED driver board based on LED6000
Description

STMicroelectronics LED6000 Step-Down Monolithic Switching Regulators are designed to source up to 3A DC current for high power LED driving. The 250mV typical RSENSE voltage drop enhances the efficiency. Digital dimming is implemented by driving the dedicated DIM pin. The adjustable current limitation, designed to select the inductor RMS in accordance with the nominal output LED current, and the adjustability of the switching frequency allow the size of the application to be compact. The embedded switchover feature on the VBIAS pin maximizes efficiency. Multiple devices can be synchronized by sharing the SYNCH pin to prevent beating noise in low-noise applications, and to reduce the input current RMS value. The device is fully protected against overheating, overcurrent and output short-circuit. The LED6000 is available in an HTSSOP16 exposed pad package.



CompanyST Microelectronics, Inc.
DatasheetDownload STEVAL-ILL088V1 datasheet
  
STEVAL-ILL088V1 photo

Others parts numbering
STEVAL-ILL084V1: LED Lighting Development Tools 0.5 A, floating boost LED driver board based on the LED6000
LED6000PHR: LED Lighting Drivers 3A 61V monolithic current source with dimming capability
STEVAL-ILL078V1: LED Lighting Development Tools 1 A, up to 60V Vin, buck LED driver board based on the LED6000
STEVAL-ILL079V1: LED Lighting Development Tools 0.5 A, inverting buck-boost LED driver board based on the LED6000
LED6000PHTR: LED Lighting Drivers Power Conversion

 

Features, Applications

Description

The STEVAL-ILL088V1 evaluation board is based on a monolithic current source for high power LED driving, the 61 V asynchronous switching regulator. With embedded power MOSFET, it is designed to source A DC current depending on the application conditions. The 250 mV typical RSENSE voltage drop, the VBIAS pin embedded switch-over feature and the light load management (pulse skipping) maximize power conversion efficiency across the entire load range. Digital dimming is implemented by driving the dedicated DIM pin. The current limit threshold and the switching frequency are adjustable for application optimization. The device also includes a 250 kHz oscillator that can be externally adjusted to 1.5 MHz. The size of the overall application is minimized thanks to the high switching frequency and its compatibility with ceramic output capacitors. Two LED6000 regulators can be synchronized a 180 out-of-phase configuration to reduce the total input RMS current.

Features

60 V input voltage Step-up and step-down conversion (up to 14 LEDs) 0.55 A programmed LED current 500 kHz switching frequency Digital dimming Compatible with ceramic output capacitors 180 out-of-phase synchronization Auto-recovery overcurrent and thermal protection RoHS compliant

For further information contact your local STMicroelectronics sales office

Table 1: Document revision history Date 16-Feb-2017 Version 1 Initial release. Changes

 

Some Part number from the same manufacture ST Microelectronics, Inc.
STEVAL-ILL084V1

STMicroelectronics LED6000 Step-Down Monolithic Switching Regulators are designed to source up to 3A DC current for high power LED driving. The 250mV typical RSENSE voltage drop enhances the efficiency.

LED6000PHR
STEVAL-ILL078V1
STEVAL-ILL079V1
LED6000PHTR
Same catergory

ADB1004 : . 18020 Hobart Blvd., Unit B Gardena, CA 90248 U.S.A Tel.: (310) 767-1052 Fax: (310) 767-7958 VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM MECHANICAL STRENGTH AND HEAT DISSIPATION (Solder Voids: Typical < 2%, Max. 10% of Die Area) BUILT-IN STRESS RELIEF MECHANISM FOR SUPERIOR RELIABILITY AND PERFORMANCE SURGE OVERLOAD RATING TO 300 AMPS PEAK Case: Molded.

ESM2012DV : NPN Darlington Power Module. HIGH CURRENT POWER BIPOLAR MODULE VERY LOW Rth JUNCTION TO CASE SPECIFIED ACCIDENTAL OVERLOAD AREAS ULTRAFAST FREEWHEELING DIODE FULLY INSULATED PACKAGE (UL COMPLIANT) EASY TO MOUNT LOW INTERNAL PARASITIC INDUCTANCE INDUSTRIAL APPLICATIONS: MOTOR CONTROL s UPS s DC/DC & DC/AC CONVERTERS Symbol V CEV V EBO BM P tot V isol T stg Tj Parameter Collector-Emitter.

HD6303YRP : Ic-8-bit CMOS Cpu-1mhz.

LX5115A : Terminator. Ultra 9-channel Scsi Terminator. The LX5115A SCSI terminator is part of Linfinity's UltraMAX family of high-performance, adaptive, non-linear mode SCSI products, which are designed to deliver true UltraSCSI performance in SCSI applications. The low voltage BiCMOS architecture employed in its design offers superior performance to older linear passive and active techniques. Linfinity's.

M27C512 : 512 Kbit (64KB X8) uv EPROM And OTP EPROM. 10% SUPPLY VOLTAGE in READ OPERATION ACCESS TIME: 45ns LOW POWER "CMOS" CONSUMPTION: Active Current 30mA Standby Current 100A PROGRAMMING VOLTAGE: 0.25V PROGRAMMING TIMES of AROUND 6sec. ELECTRONIC SIGNATURE Manufacturer Code: 20h Device Code: 3Dh The a 512 Kbit EPROM offered in the two ranges UV (ultra violet erase) and OTP (one time programmable).

SAA5297H/NNN : . Preliminary File under Integrated Circuits, IC02 1997 Jul 07 CONTENTS General Microcontroller Teletext acquisition Teletext Display Additional of SAA529xA devices Additional of SAA549x devices GENERAL ORDERING INFORMATION QUICK REFERENCE DATA BLOCK DIAGRAM PINNING INFORMATION Pinning Pin FUNCTIONAL Microcontroller 80C51 not supported Additional Microcontroller.

ACT9SKV-6 : Lvpecl or LVDS Voltage Controlled Oscillator. The ACT a 6-pad miniature surface mount Voltage Controlled Crystal Oscillators (VCXO) housed in mm ceramic package with a metal lid. Only 1.7mm high it is ideal for high density, automatic assembly, printed circuit boards. The device may be "pulled" by 80ppm from the nominal frequency by varying the voltage on pad 1. Applications include Networking,.

DS1NY : CIT Switch. S Electrical Ratings Electrical Life Contact Resistance Actuation Force Actuator Travel Dielectric Strength Insulation Resistance Operating Temperature Storage Temperature 36VDC 20,000 cycles typical 50 m initial +/-.25mm 1000Vrms min > 100M min to 85C Actuator Housing Cover Contacts Terminals PC Polycarbonate 6/6 Nylon 6/6 Nylon Phosphor Bronze,.

2-1437664-2 : Through Hole Terminal Block - Barrier Block Connectors, Interconnect Through Hole; BARRIER STRIP 16POS SINGLE .375". s: Color: Black ; Mounting Type: Through Hole ; Number of Positions: 16 ; Number of Rows: 1 ; Pitch: 0.375" (9.53mm) ; Terminal Block Type: Barrier Block ; Number of Circuits: 16 ; : - ; Current: 20A ; Voltage: 300V ; Wire Gauge: 12-22.

89PR100KLF : Trimmer Resistors - Through Hole 3/4" Rect 100K 10% 20-turn. s: Manufacturer: BI Technologies ; Product Category: Trimmer Resistors - Through Hole ; RoHS:  Details ; Product Type: Multiturn ; Resistance: 100 KOhms ; Power Rating: 750 mWatts (3/4 Watt) ; Operating Temperature Range: - 55 C to + 125 C ; Tolerance: 10 % ; Adjustment: Side Slot ; Element.

H11B1VM : Transistor Output Optocouplers Photodarlington. s: Manufacturer: Fairchild Semiconductor ; Product Category: Transistor Output Optocouplers ; RoHS:  Details ; Configuration: 1 Channel ; Input Type: DC ; Maximum Collector Emitter Voltage: 25 V ; Maximum Collector Emitter Saturation Voltage: 1 V ; Isolation Voltage: 5300 Vrms ; Maximum Forward Diode.

MC9RS08KB8CTG : Microcontrollers (MCU) 8-BIT 8K FLASH. s: Manufacturer: Freescale Semiconductor ; Product Category: Microcontrollers (MCU) ; RoHS:  Details ; Core: RS08 ; Processor Series: RS08KB ; Data Bus Width: 8 bit ; Maximum Clock Frequency: 20 MHz ; Program Memory Size: 8 KB ; Data RAM Size: 254 B ; On-Chip ADC: Yes ; Operating Supply Voltage: 1.8 V to 5.5 V ; Operating.

C0402C399C3GALTU : 3.9pF Ceramic Capacitor 0402 (1005 Metric) 25V; CAP CER 3.9PF 25V NP0 0402. s: Capacitance: 3.9pF ; Voltage - Rated: 25V ; Tolerance: 0.25pF ; Package / Case: 0402 (1005 Metric) ; Temperature Coefficient: C0G, NP0 ; Packaging: Tape & Reel (TR) ; : - ; Lead Spacing: - ; Operating Temperature: -55C ~ 125C ; Mounting Type: Surface Mount, MLCC ; Lead.

N1.25-MS3 : - Free Hanging (In-Line) Terminal - Ring Connectors, Interconnect Free Hanging (In-Line); RING TONGUE R TYPE. s: Color: Red ; : Brazed Seam ; Wire Gauge: 16-22 AWG ; Insulation: Insulated ; Length - Overall: 0.732" (18.60mm) ; Mounting Type: Free Hanging (In-Line) ; Packaging: Bulk ; Stud/Tab Size: 3 Stud ; Terminal Type: Circular ; Thickness: 0.031".

TNPW251251R0BEEY : 51 Ohm 0.5W, 1/2W Chip Resistor - Surface Mount; RES 51.0 OHM 1/2W 0.1% 2512. s: Resistance (Ohms): 51 ; Power (Watts): 0.5W, 1/2W ; Tolerance: 0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 25ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

D3-50001 : 10 MHz - 1000 MHz RF/MICROWAVE DIRECTIONAL COUPLER, 0.5 dB INSERTION LOSS-MAX. s: RF Coupler Type: Uni-Directional ; Impedance: 50 ohms ; Frequency Range: 10.00 to 1000.00 MHz ; Insertion Loss: 0.50 dB ; VSWR: 1.20 1.

JN6FS04NJ1 : 4 CONTACT(S), FEMALE, CIRCULAR CONNECTOR, CRIMP, PLUG. s: Gender: Female ; Termination Types: Crimp ; Mounting Style: CableEnd ; Number of Contacts: 4.

M81720FP : 0.35 A HALF BRIDGE BASED PRPHL DRVR, PDSO8. s: Device Type: Line / Bus Driver ; Supply Voltage: Other, 15 ; Operating Temperature: -20 to 100 C (-4 to 212 F) ; Package Type: SOP, SOP-8 ; Pins: 8 ; : RoHS.

 
0-C     D-L     M-R     S-Z