Details, datasheet, quote on part number: MAX14775EASA+
TitleIC TXRX RS485/422 20MBPS 8SOIC
CompanyMaxim Integrated Products
DatasheetDownload MAX14775EASA+ datasheet
MAX14775EASA+ photo

Others parts numbering


Features, Applications

The MAX14775E/MAX14776E fault-protected RS-485/ RS-422 transceivers feature 65V protection for overvoltage signal faults on communication bus lines, ensuring communication in harsh industrial environments. Each device contains one driver and one receiver and operates over the to 5.5V supply range. The MAX14775E is optimized for high-speed data rates to 20Mbps. The MAX14776E features slew-rate limited outputs for data rates to 500kbps. These transceivers are optimized for robust communication in noisy environments. A large 200mV (typ) hysteresis on receiver inputs ensure for high noise rejection and a failsafe feature guarantees a logic-high on the receiver output when the inputs are open or shorted. Driver outputs are protected against short-circuit conditions. The MAX14775E/MAX14776E receivers feature a 1/3unit load input impedance, allowing to 100 transceivers on a bus. The MAX14775E/MAX14776E are available in 8-pin SOIC and 8-pin TDFN-EP packages and operate over the to +125C temperature range.

Integrated Protection Ensures for Robust Communication 65V Fault Protection Range on Driver Outputs/ Receiver Inputs 25V Common Mode Range on the Receiver Inputs Large Receiver Hysteresis Increases Noise Tolerance Hot-Swap Protection Thermal Shutdown High-Performance Transceiver Enables Flexible Designs Compliant with RS-485 EIA/TIA-485 Standard (MAX14775E)/500kbps (MAX14776E) Maximum Data Rate to 5.5V Supply Range to 100 Devices on the Bus Industrial Field Bus Networks Motion Controllers HVAC



(All voltages referenced to GND) RO.............................................................-0.3V to (VCC + 0.3V) DE, DI, A, B (IMAX to +70V Short-Circuit Duration (RO, A, B)...............................Continuous Continuous Power Dissipation (TA +70C) 8-pin SOIC (derate 7.60mW/C above +70C).........606.1mW 8-pin TDFN (derate 24.4mW/C above +70C).......1951.2mW Operating Temperature Range.......................... to +125C Junction Temperature.......................................................+150C Storage Temperature Range............................. to +150C Lead Temperature (soldering, 10s).................................. +300C Soldering Temperature (reflow)........................................ +260C

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

SOIC Junction-to-Ambient Thermal Resistance (JA)........132C/W Junction-to-Case Thermal Resistance (JC)..............38C/W TDFN Junction-to-Ambient Thermal Resistance (JA)..........41C/W Junction-to-Case Thermal Resistance (JC)................8C/W

Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board. For detailed information on package thermal considerations, refer to

(VCC TA = TMIN to TMAX, unless otherwise noted. Typical values are at VCC = 3.3V and = +25C.) (Note 2) PARAMETER POWER Supply Voltage Supply Current Shutdown Supply Current Shutdown Short-Circuit Supply Current DRIVER Differential Driver Output Change in Magnitude of Differential Driver Output Voltage Driver Common-Mode Output Voltage Change in Magnitude of Common-Mode Voltage Single-Ended Driver Output Voltage High Single-Ended Driver Output Voltage Low Driver Short-Circuit Output Current VCC ICC ISH ISHDN_SHRT DE = high, RE = low, no load, no switching DE = high, RE = low or B shorted DE = high, RE = low = 54, Figure = 100, Figure or 54, Figure 1a (Note or 54, Figure or 54, Figure 1a (Note 3) A and B outputs, output is high, ISOURCE 3mA A and B outputs, output is low, ISINK 0V or VCC VB +65V (Note -0.2 VCC-0.2 VCC/ mA A SYMBOL CONDITIONS MIN TYP MAX UNITS

(VCC TA = TMIN to TMAX, unless otherwise noted. Typical values are at VCC = 3.3V and = +25C.) (Note 2) PARAMETER Average Driver Short-Circuit Output Current RECEIVER Input Current (A, B) Receiver Input Resistance Common Mode Voltage Range Receiver Differential Threshold Voltage Rising Receiver Differential Threshold Voltage Falling Receiver Input Hysteresis Differential Input Fail-safe Threshold Differential Input Capacitance LOGIC OUTPUTS (RO) RO Output Logic High Voltage RO Output Logic Low Voltage RO Leakage Current RO Short-Circuit Current LOGIC INPUTS (DE, DI, RE) Input Logic High Voltage Input Logic Low Voltage Input Hysteresis Input Leakage Current Input Impedance on First Transition PROTECTION Thermal-Shutdown Threshold Thermal-Shutdown Hysteresis ESD Protection (A, B Pins to GND) ESD Protection (All Other Pins) Fault Protection Range (A, B Pins to GND) TSHDN THYST Human Body Model IEC 61000-4-2- Contact Discharge Human Body Model -65 Temperature rising kV V VOH VOL IOZR IOSR VIH VIL VHYS IIN RIN_FT DE, RE ISOURCE = 3mA, (VA - VB) +200mV VCC-0.4 ISINK = 3mA, (VA - VB) RE = high, 0V VRO VCC 0V VRO VCC 0.67 x VCC A mA IA, IB RIN VCM VTHH VTHL VTH VTH_FSH CA,B DE = low, 0V VCC 5.5V -7V VCM +12V -25V VCM +25V -25V VCM +25V VCM = 0V, time from last transition < tD_FS 25V VCM +25V, time from last transition > tD_FS Measured between A and -40 50 VCM = +12V VCM mV pF SYMBOL IOSD2 CONDITIONS or VB VCC MIN TYP MAX 250 UNITS mA


Some Part number from the same manufacture Maxim Integrated Products
Same catergory

1T7G : Glass Passivated. Pakage = TS-1 ;; Max. Reverse Voltage VRM (V)= 1000 ;; Max. Aver. Rect. Current io (A)= 1 ;; Ifsm (A)= 30.

ADC10734CIWM : 10-bit Plus Sign Serial I/o A/D Converters With Mux,. ADC10731/ADC10732/ADC10734/ADC10738 10-Bit Plus Sign Serial I/O A/D Converters with Mux, Sample/Hold and Reference This series of CMOS 10-bit plus sign successive approximation A/D converters versatile analog input multiplexers, sample/hold and a 2.5V band-gap reference. The or 8-channel multiplexers can be software configured for single-ended or differential.

FS20KMA-4A : N-channel Power MOSFET High-speed Switching Use: 200v, 20a. . ation change. ecific nal sp subject re is nic limits Th tr Notice parame Som APPLICATION CS Switch for CRT Display monitor, Switch mode power supply, etc. Parameter Drain-source voltage Gate-source voltage Drain current Drain current (Pulsed) Avalanche drain current (Pulsed) Maximum power dissipation Channel temperature Storage temperature Isolation.

SN74LVC02AD : ti SN74LVC02A, Quadruple 2-Input Positive-nOR GATE. Operate From 3.6 V Inputs Accept Voltages 5.5 V Max tpd 3.3 V Typical VOLP (Output Ground Bounce) V at VCC = 25C Typical VOHV (Output VOH Undershoot) V at VCC = 25C JESD 17 ESD Protection Exceeds JESD - 2000-V Human-Body Model - 200-V Machine Model - 1000-V Charged-Device Model (C101) The SN54LVC02A quadruple 2-input positive-NOR gate is designed.

TM55DZ : Thyristor Module High High Voltage High Power General Use Insulated Type.

TMS320C6701GJC150 : TMS320 Family. ti TMS320C6701, Floating-point Digital Signal Processor.

211BMI03 : LOW Skew, 1-to-2 Differential-to-lvhstl Fanout Buffer. Two differential LVHSTL compatible outputs One differential CLK, nCLK input pair CLK, nCLK pair can accept the following differential input levels: LVDS, LVPECL, LVHSTL, SSTL, HCSL Maximum output frequency: 700MHz Translates any single-ended input signal to LVHSTL levels with resistor bias on nCLK input Output skew: 30ps (maximum) Part-to-part skew:.

106KBM050M : 10,000 Hour Radial Lead Aluminum Electrolytic Capacitors. 10,000 Hour Radial Lead Aluminum Electrolytic Capacitors I Electronic Ballasts I Switching Power Supplies I Power Adapters S Operating Temperature Range Capacitance Tolerance WVDC Surge Voltage SVDC Dissispation Factor (120 Hz, 20C) WVDC tan I Long Life I High Temperature I RoHS Compliant After application of rated voltage and ripple current applied.

DF167S : Thermal Cut-offs. Our Thermal Cut-Offs (Organic Thermal Element Type) are used to prevent fires caused by abnormal heat generation from circuits and other heat producing electrical products. They are a non-resettable thermal fuse which open electrical contacts when temperatures exceed the specified level. When the ambient temperature rises to the functioning temperature,.

2010/20 100 : White, Off Flat Ribbon Cables, Wire 7 Strands / 36 AWG 28 AWG 100' (30.5m) Flat Cable; CABLE 20 COND RIBBON WHT 100'. s: Color: White, Off ; Wire Gauge: 28 AWG ; Length: 100' (30.5m) ; Cable Type: Flat Cable ; Pitch: 0.050" (1.27mm) ; Shielding: Unshielded ; Conductor Strand: 7 Strands / 36 AWG ; Number of Conductors: 20 ; Jacket (Insulation) Material:.

FTSH-110-01-L-D-RA : Gold Through Hole, Right Angle Rectangular - Headers, Male Pin Connectors, Interconnect Header, Unshrouded; CONN HEADR 20POS DL .05" R/A. s: Color: Black ; Connector Type: Header, Unshrouded ; Contact Finish: Gold ; Contact Mating Length: 0.120" (3.05mm) ; : - ; Mounting Type: Through Hole, Right Angle ; Number of Positions Loaded: All ; Number of Rows:.

AOD516 : Fet - Single Discrete Semiconductor Product 54A 30V 50W Surface Mount; MOSFET N CH 30V 54A TO252 DPAK. s: Mounting Type: Surface Mount ; FET Type: MOSFET N-Channel, Metal Oxide ; Drain to Source Voltage (Vdss): 30V ; Current - Continuous Drain (Id) @ 25 C: 54A ; Rds On (Max) @ Id, Vgs: 5 mOhm @ 20A, 10V ; Input Capacitance (Ciss) @ Vds: 1229pF @ 15V ; Power.

D38999/24SJ61PN : Stainless Steel, Nickel Plated Panel Mount, Bulkhead - Front Side Nut Circular Connectors, Interconnect Receptacle, Male Pins; CONN RCPT 61POS JAM NUT W/PINS. s: Connector Type: Receptacle, Male Pins ; Shell Size - Insert: 25-61 ; Mounting Type: Panel Mount, Bulkhead - Front Side Nut ; Fastening Type: Threaded ; : - ; Packaging: Bulk ; Number of Positions:.

ASET-11.0592MHZ-Y-T : 11.0592MHz Oscillator Crystal And Oscillator XO (Standard); OSC 11.0592 MHZ 3.0V SMD. s: Frequency: 11.0592MHz ; Package / Case: 6-SMD, No Lead (DFN, LCC) ; Packaging: Tape & Reel (TR) ; Type: XO (Standard) ; Operating Temperature: -40C ~ 85C ; Frequency Stability: 10ppm ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

CMF5066K500FHEB : 66.5K Ohm 0.25W, 1/4W Through Hole Resistors; RES 66.5K OHM 1% 50PPM 1/4W. s: Resistance (Ohms): 66.5K ; Power (Watts): 0.25W, 1/4W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Metal Film ; Temperature Coefficient: 50ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

3386F-1-203TLF : Ohm Trimmer Potentiometers, Variable Resistors Top Adjustment Single Turn; TRIMMER 20K OHM 0.5W TH. s: Resistance (Ohms): 20K ; Power (Watts): 0.5W, 1/2W ; Number of Turns: Single ; Adjustment Type: Top Adjustment ; Tolerance: 10% ; Mounting Type: Through Hole ; Temperature Coefficient: 100ppm/C ; Resistive Material: Cermet ; Packaging: Tube ; Lead.

0901200121 : 1 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER. s: Connector Type: TWO PART BOARD CONNECTOR ; Gender: Male ; Termination Types: SOLDER ; Number of Contacts: 1 ; RoHS Compliant: RoHS.

7P896ATA3300C25 : 448M X 16 FLASH 3V PROM CARD, 250 ns, XMA68. s: Memory Category: Flash, PROM ; Density: 7516193 kbits ; Number of Words: 448000 k ; Bits per Word: 16 bits ; Package Type: CARD-68 ; Pins: 68 ; Supply Voltage: 3.3V ; Access Time: 250 ns ; Operating Temperature: 0 to 60 C (32 to 140 F).

0-C     D-L     M-R     S-Z