Details, datasheet, quote on part number: DEVKIT-S12XE
TitleDevelopment Boards & Kits - ARM SSC Prod & Tech Enabl

NXP Semiconductors Ultra-Reliable MCUs Development Platform is a family of Development Kits designed to enable quick application prototyping and demonstration with NXP Automotive Microcontroller and Processor products. Each Development Kit in the Ultra-Reliable MCUs Development Platform offers an easy-to-use mass-storage device mode flash programmer, virtual serial port, classic programming, and run-control capabilities.

CompanyFreescale Semiconductor
DatasheetDownload DEVKIT-S12XE datasheet
Find where to buy
DEVKIT-S12XE photo

Others parts numbering
DEVKIT-S12ZVC: Development Boards & Kits - S08/S12 SSC Prod & Tech Enabl
DEVKIT-COMM: Daughter Cards & OEM Boards SSC Prod & Tech Enabl
DEVKIT-ZVL128: Development Boards & Kits - S08/S12 SSC Prod & Tech Enabl
DEVKIT-MPC5748G: Development Boards & Kits - Other Processors SSC Prod & Tech Enabl
FRDM-KEAZN32Q64: Development Boards & Kits - S08/S12 KEAZ128 Dev Board Freedom Board


Features, Applications
For rapid prototyping and development of Automotive and Industrial Applications
CAN/ LIN/ Ethernet/ FlexRayTM Communication options

The development kit is a small, cost effective evaluation and development system for quick application prototyping and demonstration with Automotive Microcontroller and Processor products. Each platform offers an easy-to-use mass-storage device mode flash programmer, virtual serial port and classic programming and run-control capabilities. It's easy, so get started today.

Easy access to the MCU GPIO pins using available headers Communication support for CAN, LIN, Flexray, USB and Ethernet Potentiometer for precise voltage and analog measurement Flexible power supply options--microUSB or external 12V power supply

Full featured S32 Design Studio IDE (S32DS) Support for Keil, IAR, SEGGER, CodeWarrior IDE, ARM mbedTM platform and more Integrated Software Development Kit S32 SDK (SDK) These are mbed and P&E Multilink enabled through the built-in USB flash programming interface (OpenSDA and OpenBDM) Look for one of the many lab code examples integrated into S32DS IDE and available on tool webpages

Cost Effective and Easy to Use Development kits starting at $29.00 suggested resale Full support within S32 Design Studio (for ARM or PPC based MCUs) and CodeWarrior IDE's (S12/S12Z) All kits come with Quick Start Guide and demo code examples Small Form Factor PCB sizes less than x 100mm Compatibility ArduinoTM pin-compatibility Expand CAN and LIN/SCI ports by adding DEVKIT-COMM communication shield adapter Add BLDC and PMSM motor control using DEVKIT-MOTORGD shield adapter Debug Simplicity Integrated USB based open-standard serial and debug adapter (OpenSDA) Integrated USB based serial background debug mode (OpenBDM) on all S12 and S12Z based products

Shield Adapter Example: DEVKIT-COMM Expansion Board

DEVKIT-COMM (CAN/LIN communication) DEVKIT-MOTORGD (motor control) DEVKIT-TRANSLATE (translate FRDM pinout)

NXP, the NXP logo and CodeWarrior are trademarks of NXP B.V. All other product or service names are the property of their respective owners. The Power Architecture and word marks and the Power and logos and related marks are trademarks and service marks licensed by 2016 NXP B.V. Document Number: AUTOMCUDEVKITFS REV 0


Some Part number from the same manufacture Freescale Semiconductor

NXP Semiconductors Ultra-Reliable MCUs Development Platform is a family of Development Kits designed to enable quick application prototyping and demonstration with NXP Automotive Microcontroller and Processor


MC9S08AC48CFGE : Microcontrollers (MCU) 48K FLASH, 8K RAM Specifications: Manufacturer: Freescale Semiconductor ; Product Category: Microcontrollers (MCU) ; RoHS:  Details ; Core: HCS08 ; Processor Series: S08AC ; Data Bus Width: 8 bit ; Program Memory Size: 48 KB ; Data RAM Size: 2 KB ; On-Chip ADC: Yes ; Operating Supply Voltage: - 0.3 V to + 5.8 V

MSC8126VT8000 : Embedded - Dsp (digital Signal Processors) Integrated Circuit (ics) SC140 Core Tray 3.30V; IC DSP QUAD 16B 500MHZ 431FCPBGA Specifications: Package / Case: 431-BFBGA, FCBGA ; Packaging: Tray ; Type: SC140 Core ; Non-Volatile Memory: External ; On-Chip RAM: 1.436MB ; Interface: DSI, Ethernet, RS-232 ; Voltage - I/O: 3.30V ; Voltage - Core: 1.20V ; Clock Rate: 500MHz ; Operating Temperature: 0C ~ 90C ; Lead Free Status:

MC9S08LH36CLH : Embedded - Microcontroller Integrated Circuit (ics) - Tray -; MCU 8BIT CPU 36K FLASH 64LQFP Specifications: Program Memory Size: 36KB (36K x 8) ; RAM Size: - ; Number of I /O: - ; Package / Case: 64-LQFP ; Speed: - ; Oscillator Type: - ; Packaging: Tray ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: S08 ; Data Converters: - ; Core Size: 8-Bit ; Operating Temperature: -40C

MC68HC908QY2CDTE : Embedded - Microcontroller Integrated Circuit (ics) Internal Tube 2.7 V ~ 5.5 V; IC MCU 1.5K FLASH W/ADC 16-TSSOP Specifications: Program Memory Size: 1.5KB (1.5K x 8) ; RAM Size: 128 x 8 ; Number of I /O: 13 ; Package / Case: 16-TSSOP (0.173", 4.40mm Width) ; Speed: 8MHz ; Oscillator Type: Internal ; Packaging: Tube ; Program Memory Type: FLASH ; EEPROM Size: - ; Core Processor: HC08 ; Data Converters: A/D 4x8

MPC8535AVTAQGA : Embedded - Microprocessor Integrated Circuit (ics) MPC85xx PowerQUICC III 32-Bit Tray 1V; MPU POWERQUICC III 783FCPBGA Specifications: Processor Type: MPC85xx PowerQUICC III 32-Bit ; Speed: 1.0GHz ; Voltage: 1V ; Features: - ; Package / Case: 783-BBGA, FCBGA ; Packaging: Tray ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

MCK16Z1CFC20B1 : 16-BIT, 25.17 MHz, MICROCONTROLLER, PQFP132 Specifications: Data Bus: 16 Bit ; Life Cycle Stage: ACTIVE ; Clock Speed: 5.2 MHz ; Supply Voltage: 4.75 to 5.25 volts ; I/O Ports: 37 ; Package Type: QFP, Other, PLASTIC, QFP-132 ; Operating Range: Industrial ; Pin Count: 132 ; Operating Temperature: -40 to 85 C (-40 to 185 F) ; Features: PWM

MPC5603PGF0VLQ4 : 32-BIT, FLASH, 64 MHz, MICROCONTROLLER, PQFP100 Specifications: Life Cycle Stage: ACTIVE ; Clock Speed: 40 MHz ; ROM Type: Flash ; Supply Voltage: 3 to 3.6 volts ; Package Type: LFQP, Other, 14 X 14 MM, 1.40 MM HEIGHT, 0.50 MM PITCH, LQFP-100 ; Operating Range: Auto ; Pin Count: 100 ; Operating Temperature: -40 to 125 C (-40 to 257 F) ; Features:

MPC8347VRAJDB : 32-BIT, 266 MHz, MICROPROCESSOR, PBGA620 Specifications: Data Bus: 32-Bit ; Supply Voltage: 1.2V ; Package Type: BGA, Other, 29 X 29 MM, 2.46 MM HEIGHT, 1 MM PITCH, LEAD FREE, PLASTIC, BGA-620 ; Pin Count: 620 ; Clock Speed: 66 MHz

PPC8568CVTAUJJA : 32-BIT, 800 MHz, RISC PROCESSOR, PBGA1023 Specifications: Architecture: RISC ; Supply Voltage: 1.1 ; Package Type: Other, 33 X 33 MM, 2.75 MM HEIGHT, 1 MM PITCH, LEAD FREE, PLASTIC, FCPBGA-1023 ; Pin Count: 1023 ; Clock Speed: 166 MHz

Same catergory

KM418RD4C : = KM418RD4C 256Kx18bitx2x16 Dependent Banks Direct RDRAM™ ;; Organization = 4Mx18 ;; Voltage(V) = 2.5 ;; Refresh = 8K/32m ;; Speed(MHz)/ TRAC(ns) = 300/53.3,356/45,400/45 ;; Package = Ubga ;; Production Status = Eol ;; Comments = Ecc.

UF1600CT-UF1608CT : -.

BA6908F : Single-phase Full-wave Motor Driver for Fan Motor.

TA8216HQ : Dual Audio Power Amplifier. TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic The TA8216H is dual audio power amplifier for consumer applications. This IC provides an output power of 13 watts per channel (at VCC = 1kHz, THD It is suitable for power amplifier of music center. High output power: Pout = 13 W/channel (Typ.) (VCC V, RL kHz, THD = 10%) Low noise: Vno = 0.14.

Y1453250K000A0L : Ultra High Precision Z-foil Resistor with TCR of 0.05 Ppm/c, PCR of 5 ppm at Rated Power, Tolerance of 0.005 %.

RFPD2580 : 45 MHz To 1200 MHz GaAs/GAN Power Doubler Hybrid The RFPD2580 is a Hybrid Power Doubler amplifier module. The part employs GaAs pHEMT die and GaN HEMT die, has high output capability, and operates from 45 MHz to 1200 MHz. It provides excellent linearity and superior return loss performance with low noise and optimal reliability..

164X11769X : D-Subminiature Standard Connectors 9 POS CRIMP FEMALE. s: Manufacturer: CONEC ; Product Category: D-Subminiature Standard Connectors ; RoHS:  Details ; Number of Positions / Contacts: 9 ; Number of Rows: 2 ; Mounting Style: Wire ; Termination Style: Crimp ; Gender: Female ; Packaging: Tray ; Shell Material: Steel ; Shell Plating: Tin.

50.620M/EMV/L-F : GLAND, EMC, M20. s: Accessory Type: Gland ; Cable Gland Material: Brass ; For Use With: Shielded Cables ; Cable Diameter: 13mm ; Gland Color: Silver ; IP/NEMA Rating: IP68 ; Thread Size - Imperial: - ; Thread Size - Metric: M20.

2-552001-1 : Gold Free Hanging (In-Line) D-shaped, Centronic Connectors, Interconnect Receptacle; CONN CHAMP 50 POS RECEPT BAIL. s: Connector Type: Receptacle ; Contact Finish: Gold ; Contact Finish Thickness: Flash ; : - ; Flange Feature: Hollow, Unthreaded ; Mounting Type: Free Hanging (In-Line) ; Number of Positions: 50 ; Number of Rows: 2 ; Termination: IDC ; Type:.

TPS28225TDRBRQ1 : Pmic - Mosfet, Bridge Driver - External Switch Integrated Circuit (ics) PWM Tape & Reel (TR) 6A 4.5 V ~ 8.8 V; IC MOSFET DVR SINK SYNC 4A 8SON. s: Configuration: High and Low Side, Synchronous ; Voltage - Supply: 4.5 V ~ 8.8 V ; Current - Peak: 6A ; Delay Time: - ; Package / Case: 8-VDFN Exposed Pad ; Packaging: Tape & Reel (TR) ; Number of Outputs:.

RCL06121R30FKEA : 1.3 Ohm 0.5W, 1/2W Chip Resistor - Surface Mount; RES 1.30 OHM .5W 1% 0612 WIDE. s: Resistance (Ohms): 1.3 ; Power (Watts): 0.5W, 1/2W ; Tolerance: 1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

9C12063A2321FKHFT : 2.32K Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES 2.32K OHM 1/4W 1% 1206 SMD. s: Resistance (Ohms): 2.32K ; Power (Watts): 0.25W, 1/4W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant.

RG3216N-2152-B-T1 : 21.5K Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES 21.5K OHM 1/4W .1% 1206. s: Resistance (Ohms): 21.5K ; Power (Watts): 0.25W, 1/4W ; Tolerance: 0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 10ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

0603B361J101C : CAPACITOR, CERAMIC, MULTILAYER, 100 V, X7R, 0.00036 uF, SURFACE MOUNT, 0603. s: Configuration / Form Factor: Chip Capacitor ; Technology: Multilayer ; Applications: General Purpose ; Electrostatic Capacitors: Ceramic Composition ; RoHS Compliant: Yes ; Capacitance Range: 3.60E-4 microF ; Capacitance Tolerance: 5 (+/- %) ; WVDC: 100 volts ; Mounting.

VLF403210MT-4R7M-CA : INDUCTOR POWER 4.7UH SMD. TDK VLF-M series power inductor is a magnetically-shielded, wound inductor designed for use in power circuits. The VLF-M boasts a low profile and very-low core loss. s: Family: Fixed Inductors ; Series: VLF-M ; Packaging  : Tape & Reel (TR)   ; Type: Wirewound ; Material - Core: Ferrite ; Inductance: 4.7H.

1553WCBK : BOX ABS 4.62X3.11X1.26 BLACK. s: Family: Boxes ; Series: 1553W ; Container Type: Box ; Size / Dimension: 4.615" L x 3.109" W (117.22mm x 78.97mm) ; Height: 1.260" (32.00mm) ; Area (L x W): 14.4" (93cm) ; Design: Hand Held, Split Sides and End Panel(s) ; Material: Plastic, ABS ; Color: Black ; Thickness: 0.118" (3.00mm) ; : PCB Supports, Sealing Gasket.

0-C     D-L     M-R     S-Z