Details, datasheet, quote on part number: TLV170IDR
PartTLV170IDR
Category
TitleIC OP AMP GP RR 1.2MHZ 8SOIC
Description

Texas Instruments' TLVx170 family of electromagnetic interference (EMI)-hardened, 36 V, single-supply, low-noise operational amplifiers (op amps) feature a THD+N of 0.0002% at 1 kHz with the ability to operate on supplies ranging from 2.7 V (±1.35 V) to 36 V (±18 V). These features, along with low noise and very high power-supply rejection ratio (PSRR), make the single-channel TLV170, dual-channel TLV2170, and quad-channel TLV4170 suitable for use in microvolt-level signal amplification. The TLVx170 family of devices also offer good offset, drift, and bandwidth with low quiescent current.



CompanyTexas Instruments Inc.
DatasheetDownload TLV170IDR datasheet
  
TLV170IDR photo

Others parts numbering
TLV2170IDR
TLV4170IPWR: IC OP AMP GP RR 1.2MHZ 14TSSOP
TLV170IDBVT: IC OP AMP GP RR 1.2MHZ SOT23-5
TLV2170IDGKT: IC OP AMP GP RR 1.2MHZ 8VSSOP

 

Features, Applications

TLVx170 36-V, Single-Supply, EMI-Hardened, Low-Power Operational Amplifiers for Cost-Sensitive Systems

The TLVx170 family of electromagnetic interference (EMI)-hardened, 36-V, single-supply, low-noise operational amplifiers (op amps) feature a THD+N at 1 kHz with the ability to operate on supplies ranging from V (18 V). These features, along with low noise and very high power-supply rejection ratio (PSRR), make the single-channel TLV170, dual-channel TLV2170, and quad-channel TLV4170 suitable for use in microvolt-level signal amplification. The TLVx170 family of devices also offer good offset, drift, and bandwidth with low quiescent current. Unlike most op amps that are specified at only one supply voltage, the TLVx170 family of op amps is specified from 36 V with the ability to swing input signals beyond the supply rails without phase reversal. The TLVx170 family is also unity-gain stable with a 200-pF capacitive load with a 1.2-MHz bandwidth and a 0.4-V/s slew rate for use in currentto-voltage converters. The device inputs can operate 100 mV below the negative rail and within V of the positive rail for normal operation, and with full rail-to-rail input with reduced performance. The TLVx170 devices are specified from to +125C. Device Information(1)

PART NUMBER TLV170 PACKAGE SOIC SOT-23 (5) SOIC (8) VSSOP (8) SOIC (14) TSSOP (14) BODY SIZE (NOM) 4.40 mm

Supply Range: 18 V Low Noise: 22 nV/Hz EMI-Hardened with RFI-Filtered Inputs Input Range Includes the Negative Supply Unity-Gain Stable: 200-pF Capacitive Load Rail-to-Rail Output Gain Bandwidth: 1.2 MHz Low Quiescent Current: 125 A per Amplifier High Common-Mode Rejection: 110 dB Low Bias Current: 10 pA (typical)

Currency Counters AC-DC Converters Tracking Amplifiers in Power Modules Server Power Supplies Inverters Test Equipment Battery-Powered Instruments Transducer Amplifiers Line Drivers or Line Receivers Smallest Packaging for 36-V Operational Amplifiers

(1) For all available packages, see the orderable addendum at the end of the data sheet.

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA.

Features.................................................................. Applications........................................................... Description............................................................. Revision History..................................................... Device Comparison Table..................................... Pin Configuration and Functions......................... Specifications.........................................................

Absolute Maximum Ratings...................................... ESD Ratings.............................................................. Recommended Operating Conditions....................... Thermal Information: TLV170................................... Thermal Information: TLV2170................................. Thermal Information: TLV4170................................. Electrical Characteristics........................................... Typical Characteristics..............................................

Device Support...................................................... Documentation Support........................................ Related Links........................................................ Receiving Notification of Documentation Updates Community Resources.......................................... Trademarks........................................................... Electrostatic Discharge Caution............................ Glossary................................................................

8.1 Overview................................................................. 15 8.2 Functional Block Diagram...................................... 15 8.3 Feature Description................................................. 15

DATE November 2016 REVISION * NOTES Initial release.
Submit Documentation Feedback Product Folder Links: TLV2170 TLV4170
DEVICE NO OF CHANNELS 2 4 PACKAGE-LEAD SOT23-5 14 VSSOP (micro size) 8 TSSOP 14

PIN NAME IN +IN NC (1) OUT TLV170 SOT-23 Negative (inverting) input Positive (noninverting) input No internal connection (can be left floating) Output Negative (lowest) power supply Positive (highest) power supply I/O DESCRIPTION

Submit Documentation Feedback Product Folder Links: TLV2170 TLV4170

 

Some Part number from the same manufacture Texas Instruments Inc.
TLV2170IDR

Texas Instruments' TLVx170 family of electromagnetic interference (EMI)-hardened, 36 V, single-supply, low-noise operational amplifiers (op amps) feature a THD+N of 0.0002% at 1 kHz with the ability

TLV4170IPWR
TLV170IDBVT
TLV2170IDGKT
ISO7840DW

Texas Instruments' ISO7840 device is a high-performance, quad-channel digital isolator with an 8,000 VPK isolation voltage. This device has reinforced isolation certifications according to VDE, CSA,

ISO7840FDW
ISO7840FDWWR
ISO7840DWWR
ISO7842-EVM
Same catergory

2SC4257 : NPN Triple Diffused Planar Silicon Transistor, High-voltage Switching Application.

7432 : . Symbol VCC TA IOH IOL Parameter Supply Voltage Operating Ambient Temperature Range Output Current High Output Current Low Min 4.75 0 Typ 5.0 25 Max Unit C mA DC CHARACTERISTICS OVER OPERATING TEMPERATURE RANGE (unless otherwise specified) Limits Symbol VIH VIL VIK VOH Parameter Input HIGH Voltage Input LOW Voltage Input Clamp Diode Voltage Output.

HS9-26CT31RH : Radiation Hardened Quad Differential Line Driver. Radiation Hardened Quad Differential Line Driver The Intersil is a quad differential line driver designed for digital data transmission over balanced lines and meets the requirements of EIA standard RS-422. Radiation hardened CMOS processing assures low power consumption, high speed, and reliable operation in the most severe radiation environments.

IDT723663 : CMOS Syncfifo(tm) With Bus-matching : 4,096x36. Memory storage capacity: x 36 Clock frequencies to 83 MHz (8 ns access time) Clocked FIFO buffering data from Port A to Port B IDT Standard timing (using EF and FF) or First Word Fall Through Timing (using OR and IR flag functions) Programmable Almost-Empty and Almost-Full flags; each has five default offsets and 1,024) Serial or parallel programming.

SI6410DQ : 30-V (D-S) Dual. Top View S* N-Channel MOSFET Source Pins 3, 6 and 7 must be tied common. ABSOLUTE MAXIMUM RATINGS (TA = 25_C UNLESS OTHERWISE NOTED) Drain-Source Voltage Gate-Source Voltage Continuous Drain Current (TJ = 150_C)a Pulsed Drain Current Continuous Source Current (Diode Conduction)a Maximum Power Dissipationa Operating Junction and Storage Temperature Range.

V551DHB34 : Varistor Products - High Energy Industrial. The DHB34 Series of transient surge suppressors are industrial highenergy Metal-Oxide Varistors (MOVs). They are designed to provide surge suppression in the AC mains outdoor and service entrance environment (distribution panels) of buildings. DHB34 applications also include industrial heavy motors, controls, and power supplies such as used in the oil-drilling,.

UPD75P516 : 4-bit, Single-chip, One-time Programmable (otp) CMOS Microcomputer With Comparator.

C1825C472KGRACTU : 4700pF Ceramic Capacitor 1825 (4564 Metric) 2000V (2kV); CAP CER 4700PF 2KV 10% X7R 1825. s: Capacitance: 4700pF ; Voltage - Rated: 2000V (2kV) ; Tolerance: 10% ; Package / Case: 1825 (4564 Metric) ; Temperature Coefficient: X7R ; Packaging: Tape & Reel (TR) ; : High Voltage ; Lead Spacing: - ; Operating Temperature: -55C ~ 125C ; Mounting Type:.

5554349-1 : Gold Panel Mount D-shaped, Centronic Connectors, Interconnect Receptacle; CONN CHAMP 24 POS RECEPTACLE. s: Connector Type: Receptacle ; Contact Finish: Gold ; Contact Finish Thickness: Flash ; : Shielded ; Flange Feature: Hollow, Unthreaded ; Mounting Type: Panel Mount ; Number of Positions: 24 ; Number of Rows: 2 ; Termination: IDC ; Type: - ; Connector.

DDMG-24X7P-J-K87 : Gold Panel Mount; Through Hole, Right Angle D-sub Connectors, Interconnect Plug, Male Pins; CONN DSUB PLUG 24X7 R/A PCB. s: Connector Type: Plug, Male Pins ; Contact Finish: Gold ; : Board Lock, Grounding Indents, Shielded ; Flange Feature: Mating Side; Female Screwlock (4-40) ; Mounting Type: Panel Mount; Through Hole, Right Angle ; Number of Positions:.

PM1210-R47J : Fixed Inductors, Coils, Choke 470nH 450mA 1210 (3225 Metric) Ferrite Core; INDUCTOR .47UH 5% 1210 SMD. s: Inductance: 470nH ; Tolerance: 5% ; Package / Case: 1210 (3225 Metric) ; Packaging: Cut Tape (CT) ; Type: Ferrite Core ; Current: 450mA ; Mounting Type: Surface Mount ; Q @ Freq: 28 @ 25.2MHz ; Frequency - Self Resonant: 220MHz ; DC Resistance.

AP139-18WG-7 : Pmic - Voltage Regulator - Linear (ldo) Integrated Circuit (ics); IC REG LDO 300MA 1.8V LN SOT-25. s: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

ERD-S1TJ201V : 200 Ohm 0.5W, 1/2W Through Hole Resistors; RES 200 OHM CARBON FILM 1/2W 5%. s: Resistance (Ohms): 200 ; Power (Watts): 0.5W, 1/2W ; Tolerance: 5% ; Packaging: Cut Tape (CT) ; Composition: Carbon Film ; Temperature Coefficient: -150/ -350ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

RT0402CRD0731K6L : 31.6K Ohm 0.063W, 1/16W Chip Resistor - Surface Mount; RES 31.6KOHM 1/16W .25% SMD 0402. s: Resistance (Ohms): 31.6K ; Power (Watts): 0.063W, 1/16W ; Tolerance: 0.25% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 25ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

HMD846H : 2450 MHz, BAND PASS FILTER. s: Filter Type: Bandpass ; Fc: 2450 MHz ; Insertion Loss: 1.6 dB ; VSWR: 2 1 ; Package Type: Surface Mount ; Operating Temperature: -40 to 185 F (233 to 358 K).

54951BE : 67.46 mm2, COPPER ALLOY, TIN FINISH, RING TERMINAL. s: Terminal Type: Ring Terminal ; Material: Copper ; North American: 0.0 AWG ; International: 67.46 mm2 ; : RoHS.

 
0-C     D-L     M-R     S-Z