Details, datasheet, quote on part number: EV1HMC6300BG46
PartEV1HMC6300BG46
Category
TitleRF Development Tools HMC6300BG46 Evaluation PCB
Description

Analog Devices HMC6300/HMC6301 is offered as a complete MillimeterWave Transmitter/Receiver integrated circuit. HMC6300/HMC6301 covers 57GHz to 64GHz with up to 1.8GHz of double-sided modulation bandwidth. Combining the HMC6300 transmitter with the HMC6301 receiver provides a complete 60GHz transmit/receive chipset suited for multi-Gbps operation in the unlicensed 60GHz ISM band.



CompanyAnalog Devices
DatasheetDownload EV1HMC6300BG46 datasheet
  
EV1HMC6300BG46 photo

Others parts numbering
EV1HMC6301BG46: RF Development Tools HMC6301BG46 Evaluation PCB
HMC6300BG46: RF Transmitter V-Band eWLB pkg Transmitter
HMC6301BG46: RF Receiver V-Band eWLB pkg Receiver
EK1HMC6350: RF Development Tools EVALUATION KIT ASSEMBLY

 

Features, Applications

One Technology Way P.O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com

FEATURES

60 GHz evaluation kit designed for quick evaluation of the HMC6300 and HMC6301 transmit/receive chipset Demonstration platform allows easy integration of the HMC6300 and HMC6301 radio link with a baseband modem for over the air transmission

2 PCs, one designated for each motherboard for GUI control Baseband source Spectrum analyzer
APPLICATIONS

Point to point millimeter wave radio development Wireless Gigabyte Alliance/IEEE 802.11ad radio 60 GHz RF sniffing 60 GHz signal generator Modem development Radar/high resolution Imaging

The EK1HMC6350 evaluation kit allows users to set up a halfduplex, 60 GHz millimeter wave link using standard baseband analog interfaces. MMPX and 1.85 mm connectors are provided to interface with third party test equipment or millimeter wave antennas. The EK1HMC6350 evaluation kit includes a USB interface and graphical user interface (GUI) software, the HMC6300/HMC6301 Graphical User Interface, allowing the user to program the HMC6300 and HMC6301 by writing to the device registers. There are two motherboards in the kit: an HMC6300 motherboard with the TX module location populated and the HMC6301 motherboard with the RX module location populated. Full specifications on the HMC6300 and HMC6301 are available in the HMC6300 and HMC6301 data sheets, which should be consulted in conjunction with this user guide when working with the evaluation board.

Tx 60 GHz transmitter motherboard/module assembly with a MMPX interface Rx 60 GHz receiver motherboard/module assembly with a MMPX interface 2 hand formable 2 inch coaxial cables with a male MMPX connector on one end and 1.85 mm male connector on the other end 1 HMC6300 motherboard/TX module with crystal, USB interface, supply regulators, MCX connector and differential I/Q interface 1 HMC6301 motherboard/RX module with crystal, USB interface, supply regulators, MCX connector and differential I/Q interface 2 wall-mount power supplies 2 USB 2.0 male/male 6 foot cables 8 phase matched MCX to SMA cables for baseband interface on both motherboards Evaluation software CD-ROM containing the HMC6300/HMC6301 Graphical User Interface software GUI

PLEASE SEE THE LAST PAGE FOR AN IMPORTANT WARNING AND LEGAL TERMS AND CONDITIONS.

Features.............................................................................................. 1 Applications....................................................................................... 1 Evaluation Kit Contents................................................................... 1 Equipment Needed........................................................................... 1 Documents Needed.......................................................................... 1 General Description......................................................................... 1 Revision History............................................................................... 2 Evaluation Board Hardware Setup................................................. 3 Connecting the MMPX Cable To the HMC6300 Motherboard/TX Module Assembly............................................ 3

Attaching the Baseband Cables...................................................3 Connecting the MMPX Cable to the HMC6301 Motherboard/RX Module Assembly.............................................5 Evaluation Board Software Quick Start Procedures.....................6 Programming the TX Module.................................6 Programming the Module.................................9 60 GHz Wireless Radio Link......................................................... 12

EK1HMC6350 User Guide EVALUATION BOARD HARDWARE SETUP
CONNECTING THE MMPX CABLE TO THE HMC6300 MOTHERBOARD/TX MODULE ASSEMBLY

Remove the HMC6300 motherboard/TX module assembly from the kit. Snap the MMPX semirigid cable into the HMC6300 TX module output connector, shown in Figure 1. The 1.85 mm connector at the other end of the cable can interface with test equipment a WR-15 waveguide transition to connect with third party antennas.

The baseband source can be test equipment or a modem that generates a baseband tone or modulated I/Q signal. Connect the baseband inputs on the motherboard to the baseband I/Q source as follows: Motherboard BB_IP connects to the I positive baseband output Motherboard BB_IM connects to I negative baseband output Motherboard BB_QP connects to Q positive baseband output Motherboard BB_QM connects to Q negative baseband output

Attach the four phase-matched baseband cables supplied with the EK1HMC6350 evaluation kit to the Tx baseband inputs, and the baseband cables snap into place. Attach the other end of the baseband cables to the user selected baseband source.

Locate the wall mounted power supply and USB connector supplied in the kit and connect them to the HMC6300 motherboard/TX module assembly, shown in Figure 1 and Figure 2.

Figure 1. HMC6300 Assembly with the Motherboard Populated with the TX Module

 

Some Part number from the same manufacture Analog Devices
EV1HMC6301BG46

Analog Devices HMC6300/HMC6301 is offered as a complete MillimeterWave Transmitter/Receiver integrated circuit. HMC6300/HMC6301 covers 57GHz to 64GHz with up to 1.8GHz of double-sided modulation

HMC6300BG46
HMC6301BG46
EK1HMC6350
Same catergory

551-0206-013 : High Efficiency, Green. COLOR* CHART Green Yellow Red Yellow Green Contact factory for information on custom color combinations Dimensions in mm [inches] Standard Polarity shown in drawing: Cathode right Multiple CBIs form horizontal LED arrays 4.57mm (0.180") center-lines High Contrast, 94 V-0 rated, black housing Oxygen index: 31.5% Polymer content: PBT, 0.346 g Housing.

EL2450C : 125 MHZ Single Supply Quad op Amp. Specified for or 5V applications Large input common mode range 0V < VCM VS -1.2V Output swings to ground without saturating -3dB bandwidth 0.1dB bandwidth = 30MHz Low supply current = 5mA (per amplifier) Slew rate = 275V/s Low offset voltage = 4mV max Output current = 100mA High open loop gain = 80dB Differential gain = 0.05% Differential phase.

ICX409AL : Diagonal 6mm(Type 1/3) CCD Image Sensor ForccIR B/w Video Cameras. Diagonal 6mm (Type 1/3) CCD Image Sensor for CCIR B/W Video Cameras The is an interline CCD solid-state image sensor suitable for CCIR B/W video cameras with a diagonal 6mm (Type 1/3) system. Compared with the conventional product ICX059CL, basic characteristics such as sensitivity, smear, dynamic range and S/N are improved drastically. This chip a field.

DX30AJ-100P-CP3 : DX Series High-density I/O Connectors.

TS7515 : Single CHIP DPSK AND FSK Modem.

NRSZ122M6.3V10X12.5TBF : Miniature Aluminum Electrolytic Capacitors. LOW IMPEDANCE AT HIGH FREQUENCY RADIAL LEADS, POLARIZED ALUMINUM ELECTROLYTIC CAPACITORS VERY LOW IMPEDANCE includes all homogeneous materials LONG LIFE ~ 5000 hrs.) *See Part Number System for Details HIGH STABILITY AT LOW TEMPERATURE IDEALLY FOR USE IN SWITCHING POWER SUPPLIES AND.CONVERTORS CHARACTERISTICS Rated Voltage Range Capacitance Range Operating.

HES252G350W4C : Type HES 105 C High Energy Screw Terminal Aluminum Electrolytic. Type HES 105 C High Energy Screw Terminal Aluminum Electrolytic High Power Input Filtering, Screw Terminal Capacitors Type HES screw terminal, aluminum electrolytic capacitors have excellent reliability and are ideal for high power input and charge-discharge applications for welders and strobe lights. The HES can be operated C at full rated voltage.

UPC603D : Industrial Linear ICS.

B72500T140K60 : Varistors 0603 14V 30A 100pF Varistor. s: Manufacturer: EPCOS ; Product Category: Varistors ; RoHS:  Details ; Voltage Rating DC: 18 V ; Voltage Rating AC: 14 V ; Peak Surge Current: 30 A ; Surge Energy Rating: 200 mJ ; Operating Temperature Range: - 55 C to + 125 C ; Mounting: SMD/SMT ; Packaging: Bulk ; Dimensions: 1.6 mm L ; Factory Pack Quantity:.

BK/GDB-V-5A : Fuse Circuit Protection 5A 250VAC Fast Acting; FUSE 5A 250V FAST GLASS AXIAL. s: Current: 5A ; Voltage - Rated: 250VAC ; Package / Case: Axial, 5x20mm ; Fuse Type: Fast Acting ; Mounting Type: Through Hole ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant.

9433 : Screws, Bolt Hardware, Fasteners, Accessory Nylon Slotted Binding Head; SCREW BINDING HEAD 6-32 THREAD. s: Head Height: - ; Length - Below Head: 0.187" (4.75mm) 3/16" ; Material: Nylon ; Plating: - ; Screw Head Type: Slotted Binding Head ; Thread Size: 6-32 ; Type: Machine Screw ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

ST7MDTU5-EMU2B : Obsolete/discontinued Part Number Programmers, Development System; EMULATOR REAL TIME ST7. s: Type: Microcontroller ; Contents: Main Emulation Board (MEB), Target Emulation Board (TEB), Cables, Power Supply and Documentation ; For Use With/Related Products: ST7265x ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

XWA4LMR147D : T-1 SINGLE COLOR LED ARRAY, RED, 3 mm. s: LED Type: Red ; Peak Wavelength: 660 nm (6600 Å) ; Viewing Angle: 40 degrees ; Luminous Intensity: 0.2780 milliCandela ; Forward Current: 30 milliamps ; LED Package : T-1.

744392640 : 1 ELEMENT, 6.8 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD. s: Mounting Option: Surface Mount Technology ; Devices in Package: 1 ; Core Material: Ferrite ; Lead Style: WRAPAROUND ; Standards and Certifications: RoHS ; Application: General Purpose, Power Choke ; Inductance Range: 6.8 microH ; Rated DC Current: 7800 milliamps ; Operating.

 
0-C     D-L     M-R     S-Z