Details, datasheet, quote on part number: MS1J1-00000U-250PG
PartMS1J1-00000U-250PG
CategorySensors => Pressure Sensors => 8821679
TitleIndustrial Pressure Sensors I2C 1=17-4PH 0X28H O-RING RADIAL SEAL
Description

Measurement Specialties MSP100 Pressure Transducers from TE Connectivity provide stainless steel media compatibility in small profile solution. These sensors are available in both analog and 14-bit digital output with a port material of 316L SS or 17-4PH. Pressure connections are provided via an O-ring seal with custom port options. Stainless steel isolation makes MSP100 sensors suitable for harsh chemical measurements. MSP100 Pressure Transducers utilizes solid-state technology to provide high performance in small size with media compatibility.



CompanyMeasurement Specialties, Inc.
DatasheetDownload MS1J1-00000U-250PG datasheet
  
MS1J1-00000U-250PG photo

Others parts numbering
MS1S1-00000J-250PG: Industrial Pressure Sensors SPI 1=17-4PH 0X28H O-RING FACE SEAL

 

Features, Applications
SPECIFICATIONS
Analog and 14-Bit Digital Output Available Small Size Low Cost 316L Stainless Steel or 17-4PH
FEATURES

Single Piece Construction; No Welds, No Oil 100% Stainless Steel Isolation for Harsh Chemical Measurement Low Cost 14-Bit Digital Output or Analog

The MSP100 pressure transducer provides stainless steel media compatibility in a low cost, small profile solution. This sensor has no silicone gel or polymeric media isolation methods to fail in contact with water or other harsh chemicals. Pressure connections are provided via an o-ring seal. The device is available in both analog and 14-bit digital output with a port material of either or 17-4PH. Additional custom port options available to meet your application needs. The small size vs. performance and media compatibility are provided through solid-state technology.

APPLICATIONS

Beverage Dispensing Systems Water Pressure or Flow Monitor Medical Equipment Industrial Equipment/Hydraulics Tank Level Measurement Manifold Pressure

Ambient Temperature: 25C (unless otherwise specified) PARAMETERS Supply Voltage Zero Offset Span Current Consumption Proof Pressure Burst Pressure Endurance Accuracy Long Term Stability Minimum Resistance between Transducer and Body Thermal Zero Shift Thermal Span Shift Compensation Temperature Operating Temperature Response Time to 90%) Vibration Shock 3X 1E+6 MIN TYP 5.00 MAX UNITS Vdc mV mA Rated 0~FS Cycles %Span M %Span mS @250Vdc Reference to 25C over Compensated Temperature Reference to 25C over Compensated Temperature RSS of BFSL: Linearity, Hysteresis, Repeatability Ratiometric NOTES

20g MIL-STD-810C, Procedure 514.2, Figure 514.2-2, Curve 50g, 11 msec half sine shock per mil standard 202F. Method 213B, Condition A

PERFORMANCE SPECIFICATIONS (DIGITAL, OUTPUT SIGNAL "J" OR "S")

Ambient Temperature: 25C (unless otherwise specified) PARAMETERS Supply Voltage Output at Zero Pressure Output at FS Pressure Current Consumption Proof Pressure Burst Pressure Endurance Accuracy A/D Resolution Operating Temperature Operating Temperature Output Temperature Accuracy Thermal Zero Shift Thermal Span Shift Compensated Temperature Response Time to 90%) Response Time to 90%) Vibration Shock 3X 1E+6 MIN TYP MAX UNITS Vdc Count mA Rated 0~FS Cycles %Span Bit C Count C %F.S. @ 4MHz Without Sleep Mode With Sleep Mode Pressure Port Temperature Reference to 25C over Compensated Temperature Reference to 25C over Compensated Temperature @250Vdc RSS of BFSL: Linearity, Hysteresis, Repeatability NOTES

20g MIL-STD-810C, Procedure 514.2, Figure 514.2-2, Curve 50g, 11 msec half sine shock per mil standard 202F. Method 213B, Condition A


 

Some Part number from the same manufacture Measurement Specialties, Inc.
MS1S1-00000J-250PG

Measurement Specialties MSP100 Pressure Transducers from TE Connectivity provide stainless steel media compatibility in small profile solution. These sensors are available in both analog and 14-bit

 
0-C     D-L     M-R     S-Z