Details, datasheet, quote on part number: EV1HMC574AMS8
PartEV1HMC574AMS8
CategoryEmbedded Solutions => Engineering Tools => RF / Wireless Development Tools => RF Development Tools => 8821670
TitleRF Development Tools EVALUATION PCB ASSEMBLY
Description

Analog Devices EV1HMC574AMS8 Evaluation Board helps designers evaluate the features and capabilities of the HMC574AMS8E is GaAs MMIC SPDT Switch. The HMC574AMS8E switch is well-suited suited for Cellular/3G infrastructure, WiMAX and WiBro applications with a typical 0.3dB insertion loss. The EV1HMC574AMS8 Evaluation Board features a PCB-mount SMA RF connector, DC Pin, 100pF capacitor, 10,000pF capacitor, 100 resistor, and the HMC574AMS8E T/R Switch.

CompanyAnalog Devices
DatasheetDownload EV1HMC574AMS8 datasheet
Specifications 
Product CategoryRF Development Tools
ManufacturerAnalog Devices Inc.
ProductEvaluation Boards
TypeRF Switches
Tool Is For Evaluation OfHMC574AMS8E
FrequencyDC to 3 GHz
Operating Supply Voltage3 V to 8 V
BrandAnalog Devices
Maximum Operating Temperature+ 85 C
Minimum Operating Temperature- 40 C
SeriesHMC574A
Factory Pack Quantity1
EV1HMC574AMS8 photo

 

Features, Applications

Typical Applications
Features

Low Insertion Loss: 0.3 dB High Third Order Intercept: +63 dBm Isolation: 30 dB Single Positive Supply: to +8V SMT Package: MSOP8

Cellular/3G Infrastructure Private Mobile Radio Handsets WLAN, WiMAX & WiBro Automotive Telematics Test Equipment

The HMC574AMS8E is low-cost SPDT switch in 8-lead MSOP packages for use in transmit/ receive applications which requires very low distortion at high incident power levels. The device can control signals from to 3 GHz and is especially suited for Cellular/3G infrastructure, WiMAX and WiBro applications with only 0.3 dB typical insertion loss. The design provides 5 watt power handling performance and +63 dBm third order intercept at +8 Volt bias. RF1 and RF2 are reflective shorts when "Off".

+25 C, Vctl = 0/+5 Vdc, Vdd = +5 Vdc (Unless Otherwise Stated), 50 Ohm System

Parameter Insertion Loss Frequency - 1.0 GHz - 2.0 GHz - 2.5 GHz - 3.0 GHz - 1.0 GHz - 2.0 GHz - 2.5 GHz - 3.0 GHz - 1.0 GHz - 2.0 GHz - 2.5 GHz - 3.0 GHz Vctl = 0/+3V Vctl = 0/+5V Vctl = 0/+8V Vctl = 0/+3V, Ptone = +23 dBm Vctl = 0/+5V, Ptone = +27 dBm Vctl = 0/+8V, Ptone = +27 dBm tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) - 3.0 GHz Min. Typ. Max. Units dB dBm ns

Input Power for 1dB Compression Input Third Order Intercept Ptone = Two-tone Input Power (Each Tone) Switching Characteristics

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D




 

Some Part number from the same manufacture Analog Devices
1B21 ISOlated, Loop-powered Voltage-to-current Converter
1B21AN
1B22 Programmable, ISOlated Voltage-to-current Converter
1B31 Wide Bandwidth Strain Gage Signal Conditioner
1B31AN
1B31S
1B31SD
1B32 Bridge Transducer Signal Conditioner
1B41 ISOlated RTD Signal Conditioner
1B41AN
1B41B
1B41BN
1B51 ISOlated Mv/thermocouple Signal Conditioner
1B51AN
1B51B
1B51BN
2101-HARDWARE DSP Development Tools For The ADSP-2101
21020-HARDWARE Development Tools For The Analog Devices ADSP-21020 DSP
21061-HARDWARE DSP Development Tools For The ADSP-21061 Sharc(r) DSP
21065-HARDWARE DSP Development Tools For The ADSP-21065L Sharc DSP
21160-HARDWARE Development Tools For The ADSP-21160 DSP
 
0-C     D-L     M-R     S-Z