Details, datasheet, quote on part number: PDRA-240-24
PartPDRA-240-24
CategoryPower => Power Supplies => 8820643
TitleDIN Rail Power Supplies 240W 24V 10A DIN Rail
Description

CUI Inc. PDRA Series AC-DC Power Supplies offer up to 240W continuous power with a universal input voltage range and a variety of protections. The PDRA Series features active power factor correction, remote on/off control, and low ripple and noise. The power supplies have a -25 to +70C temperature range and are UL/cUL 60950-1 safety approved.Features Up to 240W continuous powerUniversal input voltage rangeActive power factor correctionRemote on/off controlOutput trimLow ripple and noise -25 to +70C temperature rangeUL/cUL 60950-1 safety approvalEfficiency up to 92% Protections Over currentOver voltageInput under voltageShort circuitOver temperature 

CompanyCUI
DatasheetDownload PDRA-240-24 datasheet
Specifications 
ProductSwitching Supplies
Input Type1-Phase / Single Phase
Output Power240 W
Input Voltage85 VAC to 264 VAC, 120 VDC to 370 VDC
Number of Outputs1 Output
Output Voltage-Channel 124 V
Output Current-Channel 110 A
Commercial/MedicalCommercial
Length120 mm
Width60 mm
Height125 mm
PDRA-240-24 photo

Others parts numbering
PDRA-120-24: DIN Rail Power Supplies 120W 24V 5A DIN Rail

 

Features, Applications
For more information, please visit the product page.
FEATURES

240 W continuous power universal input voltage range over current, over voltage, input under voltage, short circuit, and over temperature protections active power factor correction remote on/off control output trim low ripple and noise to +70C temperature range UL/cUL 60950-1 safety approval efficiency to 92%

1. At full load, nominal input, 20 MHz bandwidth oscilloscope, with 1 F ceramic and 10 F electrolytyic capacitor on the output. At 230 Vac input. 3. All specifications are measured at Ta=25C, humidity <75%, nominal input voltage, and rated output load unless otherwise specified.

parameter voltage frequency under voltage protection current inrush current power factor correction no load power consumption start-up voltage at full load shutdown voltage at full load at 115 Vac at 230 Vac at 115 Vac at 230 Vac at 115 Vac at 230 Vac W conditions/description min typ max units Vac Vdc Hz Vac

parameter capacitive load initial set point accuracy line regulation load regulation adjustability1 start-up time hold-up time switching frequency temperature coefficient

at full load from 5~100% load via built in trim pot at 115/230 Vac

parameter over voltage protection over current protection short circuit protection over temperature protection conditions/description continuous, auto recovery auto recovery continuous, auto recovery output shutdown, auto recovery 150 % min typ max units

parameter isolation voltage safety approvals safety class EMI/EMC conducted emissions radiated emissions ESD radiated immunity EFT/burst surge conducted immunity

conditions/description input to output for 1 minute input to ground for 1 minute output to ground for 1 minute EN 60950-1 class 61000-3-3 CISPR22/EN55022, Class B CISPR22/EN55022, Class B IEC/EN61000-4-2, Class B, contact 6 kV/ air kV IEC/EN61000-4-3, Class A, 10 V/m IEC/EN61000-4-4, Class 4 kV

IEC/EN61000-4-5, Class B, line to line 2 kV/ line to ground kV IEC/EN61000-4-6, Class A, 10 Vr.m.s cui.com

2. The power supply is considered a component which will be installed into final equipment. The final equipment still must be tested to meet the necessary EMC directives.

parameter PFM voltage dips & interruptions MTBF RoHS

1. The power supply is considered a component which will be installed into final equipment. The final equipment still must be tested to meet the necessary EMC directives.

parameter operating temperature storage temperature storage humidity non-condensing conditions/description see derating curves min -25 typ max 85 95 units C %

parameter dimensions material weight conditions/description x 4.72 inches) heat resistant plastic (UL94V-0) and metal 820 g min typ max units mm

units: mm [inch] tolerance: 1.00[0.040] wire range: 26~10 AWG strip length: 8.0 mm mounts to DIN RAIL TS35 TERMINAL CONNECTIONS TERMINAL CONTROL TERMINAL 1 2 Function +CTRL -CTRL Function +Vo -Vo AC(N) AC(L)


 

Some Part number from the same manufacture CUI
PDRA-120-24

CUI Inc. PDRA Series AC-DC Power Supplies offer up to 240W continuous power with a universal input voltage range and a variety of protections. The PDRA Series features active power factor correction,

 
0-C     D-L     M-R     S-Z