Details, datasheet, quote on part number: EVAL-ADUM226N0EBZ
PartEVAL-ADUM226N0EBZ
Category
TitleEVAL BOARD FOR ADUM226
Description

ADI’s ADuM1xxN and ADuM2xxN family are single and dual channel digital isolators based on iCoupler technology. With input topologies of 1/0, 1/1, and 2/0, these isolators offer a wide range of options. Combining high-speed, complementary metal-oxide semiconductor (CMOS) and monolithic air core transformer technology, this isolation component provides outstanding performance characteristics that are superior to alternatives such as optocoupler devices and other integrated couplers. The maximum propagation delay is 13 ns with a pulse width distortion of less than 3 ns at 5 V operation.



CompanyAnalog Devices
DatasheetDownload EVAL-ADUM226N0EBZ datasheet
  
EVAL-ADUM226N0EBZ photo

Others parts numbering
EVAL-1CH2CHSOICEBZ: EVAL BOARD 1/2 CHANNEL SOIC
ADUM110N0BRZ: DGTL ISO 3KV GEN PURP 8SOIC
ADUM110N1BRZ
ADUM120N1BRZ: IC DGTL ISO 2CH LOGIC 8SOIC
ADUM120N0BRZ: DGTL ISO 3KV 2CH GEN PURP 8SOIC
ADUM210N1BRIZ: DGTL ISO 5KV 1CH GEN PURP
ADUM210N0BRIZ
ADUM221N1BRWZ: DGTL ISO 5KV 2CH GEN PURP
ADUM221N0BRWZ
ADUM225N1BRIZ
ADUM225N0BRIZ
ADUM226N0BRIZ
ADUM226N0WBRIZ: DGTL ISO 5KV 2CH GEN PURP 8SOIC

 

Features, Applications
FEATURES
APPLICATIONS
General-purpose multichannel isolation Industrial field bus isolation Automotive systems

The ADuM220N/ADuM221N/ADuM225N/ADuM226N1 are dual-channel digital isolators based on Analog Devices, Inc., iCoupler® technology. Combining high speed, complementary metal-oxide semiconductor (CMOS) and monolithic air core transformer technology, these isolation components provide outstanding performance characteristics superior to alternatives such as optocoupler devices and other integrated couplers. The maximum propagation delay 13 ns with a pulse width distortion (PWD) of less than 5 V operation. Channel matching is tight 3.0 ns maximum. The ADuM220N/ADuM221N/ADuM225N/ADuM226N data channels are independent and are available in a variety of configurations with a withstand voltage rating 5.0 kV rms (see the Ordering Guide). The devices operate with the supply voltage on either side ranging from 5 V, providing compatibility with lower voltage systems as well as enabling voltage translation functionality across the isolation barrier. Unlike other optocoupler alternatives, dc correctness is ensured in the absence of input logic transitions. Two different fail-safe options are available, in which

the outputs transition to a predetermined state when the input power supply is not applied or the inputs are disabled.The ADuM220N0 is pin compatible with the ADuM2210 RW-16 package. The ADuM220N1 is pin compatible with the ADuM2200 RW-16 package. The ADuM221N0 is pin compatible with the ADuM2211 RW-16 package. The ADuM221N1 is pin compatible with the ADuM2201 RW-16 package.

Protected by U.S. Patents 6,873,065; 6,903,578; and 7,075,329. Other patents are pending. Document Feedback One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2016 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.

High common-mode transient immunity: 100 kV/s High robustness to radiated and conducted noise Low propagation delay: 13 ns maximum for 5 V operation, 15 ns maximum for 1.8 V operation 150 Mbps maximum data rate Safety and regulatory approvals (pending) UL recognition: 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE certificate of conformity DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM 849 V peak 10,000 V peak surge/impulse voltage rating CQC Certification per GB4943.1-2011 Low dynamic power consumption 5 V level translation High temperature operation: 125°C maximum Fail-safe high or low options 8-lead/16-lead, RoHS compliant SOIC packages Qualified for automotive applications

Features.............................................................................................. 1 Applications....................................................................................... 1 General Description......................................................................... 1 Functional Block Diagrams............................................................. 1 Revision History............................................................................... 2 Specifications..................................................................................... 3 Electrical Characteristics--5 V Operation................................ 3 Electrical Characteristics--3.3 V Operation............................ 4 Electrical Characteristics--2.5 V Operation............................ 6 Electrical Characteristics--1.8 V Operation............................ 7 Insulation and Safety Related Specifications............................ 9 Package Characteristics............................................................... 9 Regulatory Information............................................................. 10 DIN V VDE V 0884-10 (VDE V 0884-10) Insulation Characteristics............................................................................ 11 Recommended Operating Conditions.................................... 12

Absolute Maximum Ratings......................................................... 13 ESD Caution................................................................................ 13 Pin Configurations and Function Descriptions......................... 15 Typical Performance Characteristics........................................... 18 Theory of Operation...................................................................... 19 Overview..................................................................................... 19 Applications Information.............................................................. 20 PCB Layout................................................................................. 20 Propagation Delay Related Parameters................................... 20 Jitter Measurement..................................................................... 20 Insulation Lifetime..................................................................... 20 Outline Dimensions....................................................................... 22 Ordering Guide.......................................................................... 23 Automotive Products................................................................. 23

0 to Rev. A Changes to Features Section and Applications Section............... 1 Added Automotive Products Section........................................... 23 Changes to Ordering Guide.......................................................... 4/2016--Revision 0: Initial Version

All typical specifications are 5 V. Minimum/maximum specifications apply over the entire recommended operation range 5.5 V, and TA +125°C, unless otherwise noted. Switching specifications are tested with 15 pF and CMOS signal levels, unless otherwise noted. Supply currents are specified with 50% duty cycle signals. Table 1.

Parameter SWITCHING SPECIFICATIONS Pulse Width Data Rate Propagation Delay Pulse Width Distortion Change vs. Temperature Propagation Delay Skew Channel Matching Codirectional Opposing Direction Jitter DC SPECIFICATIONS Input Threshold Logic High Logic Low Output Voltage Logic High Logic Low Input Current per Channel Quiescent Supply Current ADuM220N/ADuM225N Symbol PW Min 150 4.8 Typ Max Unit ns Mbps ns ps/°C ns Test Conditions/Comments Within pulse width distortion (PWD) limit Within PWD limit 50% input to 50% output |tPLH - tPHL| Between any two units at the same temperature, voltage, and load

See the Jitter Measurement section See the Jitter Measurement section

IDD1 (Q) IDD2 (Q) IDD1 (Q) IDD2 (Q) ADuM221N/ADuM226N IDD1 (Q) IDD2 (Q) IDD1 (Q) IDD2 (Q) Dynamic Supply Current Dynamic Input Dynamic Output Undervoltage Lockout Positive VDDx Threshold Negative VDDx Threshold VDDx Hysteresis IDDI (D) IDDO (D) UVLO VDDxUV+ VDDxUV- VDDxUVH

0 (N1)5 Inputs switching, 50% duty cycle Inputs switching, 50% duty cycle

 

Some Part number from the same manufacture Analog Devices
EVAL-1CH2CHSOICEBZ

ADI’s ADuM1xxN and ADuM2xxN family are single and dual channel digital isolators based on iCoupler technology. With input topologies of 1/0, 1/1, and 2/0, these isolators offer a wide range of options.

ADUM110N0BRZ
ADUM110N1BRZ
ADUM120N1BRZ
ADUM120N0BRZ
ADUM210N1BRIZ
ADUM210N0BRIZ
ADUM221N1BRWZ
ADUM221N0BRWZ
ADUM225N1BRIZ
ADUM225N0BRIZ
ADUM226N0BRIZ
ADUM226N0WBRIZ
Same catergory

LM92CIM : LM92 - ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor And Thermal Window Comparator With Two-wire Interface, Package: Soic Narrow, Pin Nb=8.

LPT672-KN : Super Topled High-current Led. Gehäusebauform: P-LCC-2 Gehäusefarbe: weiß als optischer Indikator einsetzbar besonders geeignet bei hohem Umgebungslicht durch erhöhten Betriebsstrom 50 mA DC) zur Hinterleuchtung, Lichtleiter- und Linseneinkopplung für alle SMT-Bestück- und Löttechniken geeignet gegurtet (8-mm-Filmgurt) Störimpulsfest nach DIN 40839 P-LCC-2 package color of package:.

AZTEL07 : Ecl/pecl 2-input Xor/xnor. 260ps Propagation Delay High Bandwidth Output Transitions 75k Internal Input Pulldown Resistors Direct Replacement for ON Semiconductor & MC100EL07 PACKAGE Add R1 at end of part number for 7 inch (1K parts), R2 for 13 inch (2.5K parts) Tape & Reel. Date Code "YWW" on underside of part. The a 2-input XOR/XNOR gate. The device is functionally equivalent.

CCFHCR-25M125 : 3.3, 5.0 volt CMOS Oscillator. CMOS output Output frequencies to 190 MHz Low jitter, Fundamental 3rd OT Crystal Tri-state output for board test and debug Gold over nickel contact pads Product is compliant to RoHS directive and fully compatible with lead free assembly Applications SONET/SDH/DWDM Ethernet, Gigabit Ethernet Storage Area Network Vectron's C-TYPE Crystal Oscillator (XO).

LX5252CDB : 9-line Multimode SCSI Terminator. The is a multimode SCSI terminator that is compatible with the SCSI SPI-2 (Ultra2 SCSI), SCSI SPI-3 (Ultra3 SCSI or Ultra160 SCSI), and SCSI SPI-4 (Ultra320) s developed by the T10 standards committee for low voltage differential (LVD) termination, while providing backwards compatibility to the SCSI, SCSI-2, and SPI single-ended s. Multimode compatibility.

B59830C0080A070 : Leaded Disks, Coated, 110 V. Applications I Lead-free terminals I Manufacturer's logo and type designation I UL approval UL 1434 with V max 125 V and Options I Cardboard strips (standard) I Cardboard tape reeled or in AMMO pack on request General technical data Max. operating voltage (TA = 60 °C) Rated voltage Switching cycles (typ.) Reference temperature (typ.) Resistance tolerance.

IMX51A : I.MX51A Automotive And Infotainment Applications Processors The MCIMX51A (i.MX51A) Automotive Infotainment Processor represents Freescale Semiconductor’s latest addition to a growing family of multimedia focused products offering high performance processing with a high degree of functional integration, aimed at the growing automotive infotainment market.

XTIB-R : Rf Accessory Rf/if And Rfid; BOARD INTERFACE 1W RS232/485. s: Accessory Type: Interface Board ; For Use With/Related Products: XTend Radios ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant.

ECE-P2EA222HA : 2200µF Aluminum Capacitor Radial, Can - Snap-In - 5 Lead 250V; CAP ALUM 2200UF 250V 20% SNAP. s: Capacitance: 2200µF ; ESR (Equivalent Series Resistance): 98.0 mOhm ; : General Purpose ; Lifetime @ Temp.: 3000 Hrs @ 105°C ; Size / Dimension: 1.969" Dia (50.00mm) ; Lead Spacing: 0.984" (25.00mm) ; Surface Mount Land Size: - ; Mounting Type: Through Hole.

ECW-F4823JB : 0.082µF Film Capacitor Radial; CAP FILM 0.082UF 400VDC RADIAL. s: Capacitance: 0.082µF ; Tolerance: ±5% ; Dielectric Material: Polypropylene, Metallized ; Package / Case: Radial ; Packaging: Bulk ; Lead Spacing: 0.591" (15.00mm) ; ESR (Equivalent Series Resistance): - ; Mounting Type: Through Hole ; : High Frequency and High Stability ; Lead Free Status:.

LT1054CDWG4 : Pmic - Voltage Regulator - Dc Dc Switching Regulator Integrated Circuit (ics) Switched Capacitor (Charge Pump) 100mA -5V; IC CHRG PUMP -5V 0.1A 16SOIC. s: Type: Switched Capacitor (Charge Pump) ; Output Type: Fixed ; PWM Type: - ; Synchronous Rectifier: No ; Number of Outputs: 1 ; Voltage - Output: -5V ; Current - Output: 100mA ; Frequency - Switching:.

GC-536-0203 : SPDT Pushbutton Switch On-On 1A (AC), 3A (DC); SWITCH PUSHBUTTON SPDT 1A 125V. s: Type: Standard ; Circuit: SPDT ; Switch Function: On-On ; Current Rating: 1A (AC), 3A (DC) ; Voltage Rating - AC: 125V ; Voltage Rating - DC: 14V ; Actuator Type: Round, Plunger ; Color - Actuator/Cap: White ; Illumination Type, Color: - ; Illumination Voltage (Nominal):.

FTH-14S-01-M : Natural Nylon Tie - Holder And Mounting Cables, Wire - Management; TIE HOLD FLAT WIT 18-120 .26". s: Material: Nylon ; Mounting Type: Screw, #14 ; Type: Dual Opening ; Size / Dimension: 0.88" L x 0.62" W x 0.39" H (22.2mm x 15.7mm x 9.8mm) ; Color: Natural ; For Use With/Related Products: WIT-18 through -120 and QTE-18 through -120 Ties ; Lead Free.

MAX3949 : 11.3Gbps, Low-Power, AC-Coupled Laser Driver The MAX3949 is a 3.3V, multirate, low-power laser diode driver designed for Ethernet, Fibre Channel, and SONET transmission systems at data rates up to 11.3Gbps. This device is optimized to drive a differential transmitter optical subassembly (TOSA) with a 25? flex circuit. The unique design of the output.

MUR1060CT-BP : 10 A, 600 V, SILICON, RECTIFIER DIODE, TO-220AB. s: Package: TO-220, TO-220AB, 3 PIN ; Number of Diodes: 1 ; VRRM: 600 volts ; IF: 10000 mA ; trr: 0.0800 ns ; RoHS Compliant: RoHS.

PC923L0NIZ0F : 1 CHANNEL LOGIC OUTPUT OPTOCOUPLER. s: Mounting Option: ROHS COMPLIANT, PLASTIC, SMT, DIP-8 ; Forward Current: 0.0200 amps ; Output: LOGIC OUTPUT ; Isolation Voltage: 5000 volts ; Operating Temperature: -40 to 70 C (-40 to 158 F) ; Approvals: RoHS.

54432-1442 : 144 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SURFACE MOUNT, SOCKET. s: Applications: Card Edge ; Gender: Female ; Termination Types: PCBSolder ; Number of Contacts: 144.

 
0-C     D-L     M-R     S-Z